Construction and Building Materials - v. 23, n. 10 (October 2009)

Published:	October 2009

Articles in this Issue

Author(s)	Title	Page(s)
Ajam, Lassaad / Ouezdou, Mongi Ben / Felfoul, Hayet Sfar / Mensi, Rachid El	Characterization of the Tunisian phosphogypsum and its valorization in clay bricks	3240-3247
Lecomte, André / Mechling, Jean-Michel / Diliberto, Cécile	Compaction index of cement paste of normal consistency	3279-3286
Kabir, Shahid / Rivard, Patrice / He, Dong-Chen / Thivierge, Philippe	Damage assessment for concrete structure using image processing techniques on acoustic borehole imagery	3166-3174
Garg, Mridul / Jain, Neeraj / Singh, Manjit	Development of alpha plaster from phosphogypsum for cementitious binders	3138-3143
Cordeiro, G. C. / Toledo Filho, R. D. / Fairbairn, E. M. R.	Effect of calcination temperature on the pozzolanic activity of sugar cane bagasse ash	3301-3303
Zhang, Baochang / Xi, Man / Zhang, Dewen / Zhang, Huixuan / Zhang, Baoyan	The effect of styrene–butadiene–rubber/montmorillonite modification on the characteristics and properties of asphalt	3112-3117
Lai, W. L. / Kou, S. C. / Poon, C. S. / Tsang, W. F. / Lai, C. C.	Effects of elevated water temperatures on interfacial delaminations, failure modes and shear strength in externally-bonded CFRP-concrete beams using infrared thermography, gray-scale images and direct shear test	3152-3160
García, Álvaro / Schlangen, Erik / van de Ven, Martin / Liu, Quantao	Electrical conductivity of asphalt mortar containing conductive fibers and fillers	3175-3181
Lanzón, Marcos / García-Ruiz, P. A.	Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives	3287-3291
Seo, Joo-Won / Kim, Soo-Il / Choi, Jun-Sung / Park, Dae-Wook	Evaluation of layer properties of flexible pavement using a pseudo-static analysis procedure of Falling Weight Deflectometer	3206-3213
Ye, Yong / Yang, Xinhua / Chen, Chuanyao	Experimental researches on visco-elastoplastic constitutive model of asphalt mastic	3161-3165
Xiao, Feipeng / Wenbin Zhao, P. E. / Amirkhanian, Serji N.	Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives	3144-3151
Badawi, Moataz / Soudki, Khaled	Flexural strengthening of RC beams with prestressed NSM CFRP rods – Experimental and analytical investigation	3292-3300
Tasdemir, Yuksel	High temperature properties of wax modified binders and asphalt mixtures	3220-3224
Achchaq, Fouzia / Djellab, Karim / Beji, Hassen	Hydric, morphological and thermo-physical characterization of glass wools: From macroscopic to microscopic approach	3214-3219
Tsai, Kuang-Chung	Influence of substrate on fire performance of wall lining materials	3258-3263
Kadri, E.-H. / Aggoun, S. / De Schutter, G.	Interaction between C3A, silica fume and naphthalene sulphonate superplasticiser in high performance concrete	3124-3128
Parres, F. / Crespo-Amorós, J. E. / Nadal-Gisbert, A.	Mechanical properties analysis of plaster reinforced with fiber and microfiber obtained from shredded tires	3182-3188
Mendes Silva, J. A. R. / Falorca, Jorge	A model plan for buildings maintenance with application in the performance analysis of a composite facade cover	3248-3257
Senff, Luciano / Barbetta, Pedro A. / Repette, Wellington L. / Hotza, Dachamir / Paiva, Helena / Ferreira, Victor M. / Labrincha, João A.	Mortar composition defined according to rheometer and flow table tests using factorial designed experiments	3107-3111
Çağlar, Naci	Neural network based approach for determining the shear strength of circular reinforced concrete columns	3225-3232
Chen, Ji-Hsien / Huang, Jong-Shin / Chang, Yi-Wen	A preliminary study of reservoir sludge as a raw material of inorganic polymers	3264-3269
Song, Ha-Won / Pack, Seung-Woo / Ann, Ki Yong	Probabilistic assessment to predict the time to corrosion of steel in reinforced concrete tunnel box exposed to sea water	3270-3278
Meddah, Mohammed Seddik / Bencheikh, Mohamed	Properties of concrete reinforced with different kinds of industrial waste fibre materials	3196-3205
Barbhuiya, S. A. / Gbagbo, J. K. / Russell, M. I. / Basheer, P. A. M.	Properties of fly ash concrete modified with hydrated lime and silica fume	3233-3239
Pellegrino, Carlo / Da Porto, Francesca / Modena, Claudio	Rehabilitation of reinforced concrete axially loaded elements with polymer-modified cementicious mortar	3129-3137
Raji, Saed / Jannot, Yves / Lagière, Philippe / Puiggali, Jean Rodolphe	Thermophysical characterization of a laminated solid-wood pine wall	3189-3195
Remadnia, A. / Dheilly, R. M. / Laidoudi, B. / Queneudec, M.	Use of animal proteins as foaming agent in cementitious concrete composites manufactured with recycled PET aggregates	3118-3123

About this
data sheet
IssueID
22438
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 23, n. 10 (October 2009)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 23, n. 10 (October 2009)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.