Composite Structures - October 2023

Published:	October 2023

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Jinying / Wang, Jiacheng / Zhong, Chao / Qin, Lei	1-3-Type piezoelectric composites with three-layer cascade structure	117406
Marbaniang, Allan L. / Kabasi, Sounak / Ghosh, Siddhartha / Dutta, Subhrajit	Analysis and prestress optimisation of membrane structures with optimal fabric alignment using modified energy minimisation	117404
Li, Zhibin / del Rey Castillo, Enrique / Henry, Richard S. / Thompson, Andrew	Axial compression testing of concrete prisms confined by FRP spike anchors and estimation of failure modes	117403
Han, Shiwen / Zhou, Ao / Fan, Chao / Xiao, Gang / Ou, Jinping	Axial-flexural performance of columns reinforced by steel-FRP composite bars and FRP ties	117435
Gilson, L. / Coghe, F. / Bernardi, A. / Imad, A. / Rabet, L.	Ballistic limit evolution of field-aged flexible multi-ply UHMWPE-based composite armour inserts	117414
Chen, Zheng / Yu, Jiamin / Nong, Yumei / Yang, Yongmin / Zhang, Hexin / Tang, Yunchao	Beyond time: Enhancing corrosion resistance of geopolymer concrete and BFRP bars in seawater	117439
Ou, Jialing / Shao, Yongbo / Huang, Chao / Bi, Xin	Bond behavior of CFRP sheets-to-steel shear joints with different steel surface treatments	117376
Lian, Xin / Zhang, Weidong / Mao, Yuming / Yu, Zhefeng	Buckling optimization of curved grid-stiffened helicoidal composite panel including the factor of mode shape in multiple load cases	117383
Ji, Wenfei / Zhang, Qicheng / Alvarez-Borges, Fernando / Yuan, Guanjie / Van Duijneveldt, Jeroen / Briscoe, Wuge H. / Scarpa, Fabrizio	Composite sepiolite/chitosan layer-by-layer coated flexible polyurethane foams with superior mechanical properties and energy absorption	117419
Psarras, Spyridon / Munoz, Raul / Ghajari, Mazdak	Compression performance of composite plates after multi-site impacts: A combined experimental and finite element study	117342
Zhang, Fan / Ye, Yaoyao / Li, Mengze / Wang, Han / Cheng, Liang / Wang, Qing / Ke, Yinglin	Computational modeling of micro curing residual stress evolution and out-of-plane tensile damage behavior in fiber-reinforced composites	117370
Lu, Fucong / Lin, Beicheng / Ling, Xiangyu / Zhang, Chuanbiao / Zhu, Yilin	Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio	117417
Wang, Xingyu / Xu, Yafei / Cui, Yuqing / Li, Wenkang / Zhang, Liuyang / Yan, Ruqiang / Chen, Xuefeng	DA-CNN-based similar terahertz signal identification for intelligent characterization of internal debonding defects of composites under high-resolution mode	117412
Li, Guo-Feng / Liu, Hai-Tao / Cai, Guang-Bin	Design and mechanical properties of 3D circular curve transversal-isotropic auxetic structure	117367
Hozić, Dženan / Thore, Carl-Johan / Cameron, Christopher / Loukil, Mohamed	Deterministic-based robust design optimization of composite structures under material uncertainty	117336
Chaki, Mriganka Shekhar / Bravo-Castillero, Julián	Dynamic asymptotic homogenization for wave propagation in magneto-electro-elastic laminated composite periodic structure	117410
Afonso, Alexandre / Tomé, Marta / Moleiro, Filipa / Araújo, Aurélio L.	Dynamic buckling of active sandwich panels	117355
Xu, Peilei / Lan, Xin / Zeng, Chengjun / Zhang, Xudong / Liu, Yanju / Leng, Jinsong	Dynamic characteristics and active vibration control effect for shape memory polymer composites	117327
Chen, Xing / Lin, BinBin / Schuster, Miriam / Chen, Suwen / Xu, Bai-Xiang / Schneider, Jens	Effect of moisture on the delamination properties of fractured PVB-laminated glass: A joint experimental and numerical study	117381
Ding, Shouling / Zou, Bin / Zhuang, Yuexi / Wang, Xinfeng / Feng, Zhiwei / Liu, Qingyang	Effect of printing design and forming thermal environment on pseudo-ductile behavior of continuous carbon/glass fibers reinforced nylon composites	117362
Wang, Xinxin / Ye, Tiangui / Cheng, Liangjiang / Jin, Guoyong / Chen, Yukun / Liu, Zhigang	Electro-mechanical vibro-acoustic characteristics of submerged functionally graded piezoelectric plates with general boundary conditions	117411
Lu, Qi / Deng, Xiaolin	Energy absorption and in-plane mechanical behavior of honeycomb structures with reinforced strut	117399
Khorasani, Mehdi / Muciaccia, Giovanni / Consiglio, Andrea Nino / Mostofinejad, Davood	Evaluating the behavior and bond properties of FRP spike anchors under confined conditions and elevated temperature	117407
Aljidda, Omar / El Refai, Ahmed / Alnahhal, Wael	Experimental and analytical investigation on the use of NSM–BFRP and NSM–GFRP bars in strengthening corrosion–damaged RC slabs	117428
Gu, Jin-Ben / Wang, Jun-Yan / Tao, Yi	Experimental assessment on cyclic flexural behavior of UHPC beam reinforced with negative Poisson’s ratio (NPR) steel rebar	117353
Jung, In-Jun / Choi, Seung Tae / Chang, Seung-Hwan	Experimental feasibility investigation on wearability of cloth-type electronic devices composed of functional polyvinylidene difluoride (PVDF) fibers	117358
Jia, Zijiao / Garnier, Christian / Pastor, Marie-Laetitia / Rousseau, Jérôme / Gong, Xiaojing	Experimental investigation of impacted multidirectional laminates under compressive static and cyclic loading	117335
Karimi, Sajjad / Ahmadi, Monireh / Klenin, A. I. / Hossein, Al / Zhu, Min	An experimental investigation on the influence of environmental ageing on strength and fatigue behavior of different single lap joints	117423
Wei, Ranfeng / Shen, Kechun / Pan, Guang / Li, Zhun	Experimental study on buckling behavior of composite cylindrical shells with and without circular holes under hydrostatic pressure	117434
Pyrzowski, Łukasz / Knak, Magdalena / Rucka, Magdalena	Failure characterisation of sandwich beams using integrated acoustic emission and digital image correlation techniques	117361
Chowdhury, Indraneel R. / O'Dowd, Noel P. / Comer, Anthony J.	Failure prediction in a non-crimp basalt fibre reinforced epoxy composite	117413
Oyebanji, Jide / Sun, Changze / Saleh, Mohamed Nasr / Krishnan, Kapil / Guan, Zhongwei	FibrePlug – An ABAQUS plug-in for multi-scale modelling of textile composites	117384
Sun, Yu / Ji, Jiang-Hao / Zhu, Hong / Dong, Zhi-Qiang / Zhang, Pu / Yan, Meng / Soh, Chee-Kiong	Flexural behaviours of pretensioned prestressed concrete-UHDC composite beams reinforced with CFRP bars	117385
Huang, Qingyang / Gao, Yuan / Hua, Fenfei / Fu, Wanbiao / You, Qingquan / Gao, Jie / Zhou, Xiaoqiang	Free vibration analysis of carbon-fiber plain woven reinforced composite conical-cylindrical shell under thermal environment with general boundary conditions	117340
Najibi, Amir / Mokhtari, Tahmineh	Functionally graded materials for knee and hip arthroplasty; an update on design, optimization, and manufacturing	117350
Tornabene, Francesco / Viscoti, Matteo / Dimitri, Rossana	General boundary conditions implementation for the static analysis of anisotropic doubly-curved shells resting on a winkler foundation	117198
Zhao, Feifei / Du, Ruijie / Wang, Junli / Zhang, Feng / Hong, Bao	Geometrically nonlinear shape sensing of anisotropic composite beam structure using iFEM algorithm and third-order shear deformation theory	117364
mao, zhiwen / Xu, Kun / Qian, Xiaomei / Chu, Xianying	A global–local design method for wideband absorption/transmission sandwich rasorber with frequency-selective surfaces	117401
Guo, Shuanglin / Rébillat, Marc / Liu, Yuan / Li, Qiufeng / Lu, Chao / Mechbal, Nazih	Guided waves propagation in arbitrarily stacked composite laminates: Between-layers incompatibility issue resolution using hybrid matrix strategy	117360
Jiang, Shulan / Hu, Ruyi / Liu, Xuefeng / Cui, Yanyan / Ren, Yiru / Jiang, Hongyong	Hierarchical microstructure design of CFRP/Al interface with ZnO-nanostructures and Modified resin Pre-Coating: Nano-mechanical interlocking	117429
Song, Xinyi / Zhang, Di / Zhou, Jin / Chen, Xuefeng / Zhang, Shenghao / Bai, Longteng / Yang, Xiaohui / Du, Feiping / Guan, Zhongwei / Zheng, Xitao / Cantwell, Wesley J.	Hierarchical multi-scale analysis of the effect of varying fiber bundle geometric properties on the mechanical properties of 3D braided composites	117375
Zemčík, Hana / Kroupa, Tomáš / Vaňková, Tereza / Zemčík, Robert / Pihera, Josef / Prosr, Pavel / Kadlec, Petr / Šroubová, Lenka / Müllerová, Eva / Martínek, Petr / Pavlica, Richard / Komárek, Josef / Friedl, Jan / Polanský, Radek	Hybrid steel–composite cross-arm for distribution power lines	117415
Gohar, S. / Hussain, G. / Ali, A. / Ilyas, M. / Alkahtani, Mohammed	In-plane bending performance of novel negative Poisson’s ratio structures and its enhancement through the application of shape optimization method	117357
Wu, Yimo / Gong, Yu / Tian, Dingli / Zou, Luohuan / Zhao, Libin / Zhang, Jianyu / Hu, Ning	Influence of curing pressure on the mode I static and fatigue delamination growth behavior of CFRP laminates	117345
Han, L. / Chai, L. D. / Wei, Y. C. / Zhang, W. F. / Wang, M. / Zhang, W.	Investigating the strength of heat-sealed cast polypropylene film for lithium-ion pouch cells considering thermo-mechanical coupling effects	117368
Sihn, Sangwook / Pitz, Jeremey / Vernon, Jonathan P.	Laser-induced heating, property changes, and damage modes in carbon fiber reinforced polymer matrix woven composites	117422
Zhu, Zhongfeng / Troemner, Matthew / Wang, Wenwei / Cusatis, Gianluca / Zhou, Yingwu	Lattice discrete particle modeling of the cycling behavior of strain-hardening cementitious composites with and without fiber reinforced polymer grid reinforcement	117346
Giammaria, Valentina / Boria, Simonetta / Sarasini, Fabrizio / Tirillò, Jacopo / Cognigni, Flavio / Rossi, Marco / Fischer, Balthasar / Pörnbacher, Josef	Low-velocity impact behaviour of biocomposite laminates reinforced by flax, basalt and hybrid fibres at various temperatures: Analytical, numerical and experimental results	117332
Lim, Jaehyeong / Kim, Sang-Woo	Low-velocity impact responses of composite structures incorporating shear thickening fluid tubes under various temperatures	117349
Song, Xuepeng / Huang, Yucheng / Wang, Shi / Yu, Haigen / Hao, Yuxin	Macro-mesoscopic mechanical properties and damage progression of cemented tailings backfill under cyclic static load disturbance	117433
Miller, Justin D. / Mansson, Jan-Anders E.	Mechanical performance of highly loaded tow reinforced hybrid-molded composite structures	117311
Wang, Hao / Xie, Suchao / Feng, Zhejun / Jing, Kunkun / Zhang, Jing / Zhou, Hui	Mechanical properties of rigid and flexible polyurethane foam in-situ foamed Nomex honeycomb	117365
Olhan, Sandeep / Antil, Bindu / Khatkar, Vikas / Behera, B. K.	Mechanical, thermal, and viscoelastic behavior of sisal fibre-based structural composites for automotive applications: Experimental and FEM analysis	117427
Wang, Yongjun / Lai, Changliang / Cao, Haiying / Jiang, Ruiyi / Fan, Hualin	Metastructure with torsion-compression coupling behaviors: Additive-manufacturing, experimental and numerical investigations	117418
Ahmed, Adnan / Ud Din, Israr / Ramachandran, Rajasekar / Sikandar Bathusha, M.S / Cantwell, Wesley / Khan, Kamran A.	Micro-CT driven characterization and validation of constituents’ properties used in origami-inspired foldable composites fabricated via different manufacturing processes	117382
Wang, Lixia / Cui, Pengyuan / Bi, Zhaojie / Wang, Chen / Zhou, Baokai / Zheng, Lun / Niu, Hongbin / Sun, Xiang / Wang, Jian / Wang, Dongfang / Li, Qian	Microcell morphology evolution and mechanical performance of UHMWPE/PEG porous materials with bimodal cell structure	117347
de Lima, Patrícia B. / Krahl, Pablo A. / Silva, Flavio A. / Cardoso, Daniel C. T.	A modeling strategy for the flexural performance prediction of UHPC beams accounting for variability of properties	117374
Bragaglia, Mario / Cecchini, Federico / Paleari, Lorenzo / Ferrara, Miriam / Rinaldi, Marianna / Nanni, Francesca	Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical properties	117379
Turon, Francesc / Otero, Fermin / Martinez, Xavier	Multi-scale procedure for the mechanical analysis of composite laminate structures considering mixed boundary conditions	117343
Shi, Pengpeng / Xie, Jun / Li, Xing	Multilayer heterostructure inhomogeneous model for pressurized functionally graded annular structures (cylinder/sphere/annulus) with arbitrary elastic property along the radial direction	117425
Si, Junling / Chen, Wanji / Yi, Shujuan / Yan, Yong	A new and efficient zigzag theory for laminated composite plates	117356
Gloger, Maciej / Stempien, Zbigniew / Pinkos, Justyna	Numerical and experimental investigation of the ballistic performance of hybrid woven and embroidered-based soft armour under ballistic impact	117420
Karoui, S. / Mansouri, K. / Renard, Y. / Arfaoui, M. / Homolle, T. / Bussetta, P.	Numerical homogenization of fiber reinforced layer in large elastic deformation using a decoupled iterative method	117359
Akkala, Y. / Daggumati, S.	On the failure behavior of a GFRP composite cylinder under Brazier crushing force – An experimental and computational study	117378
Tian, Xiaojuan / Zhou, Yueting / Zhang, Chuanzeng	On the imperfect interface of a functionally graded thermoelectric layered structure	117394
Avey, M. / Kadioğlu, F.	On the primary resonance of laminated moderately-thick plates containing of heterogeneous nanocomposite layers considering nonlinearity	117377
Lauff, Celine / Schneider, Matti / Montesano, John / Böhlke, Thomas	An orientation corrected shaking method for the microstructure generation of short fiber-reinforced composites with almost planar fiber orientation	117352
Chinnaboon, Boonme / Panyatong, Monchai / Chucheepsakul, Somchai	Orthotropic plates resting on viscoelastic foundations with a fractional derivative Kelvin-Voigt model	117400
Li, Pingyang / Dong, Xiaomin / Yan, Hua / Wang, Kaixiang / Ran, Jinchao / Yang, Rui	Performance evaluation of magnetorheological fluid porous fabric composite based on a novel constitute model	117363
Chen, Dean / Xiang, Yuhai / Arora, Nitesh / Yao, Qi / Li, Jian / Rudykh, Stephan	Post-buckling development in soft particulate composites	117337
Li, Zhaotong / Jin, Guoqing / Ma, Yuxin / Zhou, Xinghai / Gao, Yuan / Xiong, Xiaoqing / Dong, Kai / Lyu, Lihua	Preparation and performance of 3-D woven triboelectric nanogenerators with integrated friction and spacer layers	117430
Moreira, R. D. F. / de Moura, M. F. S. F. / Silva, F. G. A.	Quasi-static and fatigue analyses of aluminium structures repaired by CFRP patch bonding	117372
Chen, Xiuhua / Shen, Hui-Shen / Li, Chong	Re-examination of nonlinear vibration, nonlinear bending and thermal postbuckling of porous sandwich beams reinforced by graphene platelets	117392
Chen, Shuai / Lian, Xu / Zhu, Shaowei / Li, Menglei / Wang, Bing / Wu, Linzhi	A re-usable negative stiffness mechanical metamaterial composed of Bi-material systems for high energy dissipation and shock isolation	117366
Zeng, Yanqin / Xu, Lihua / Huang, Le / Yu, Min / Yu, Chunlei / Chi, Yin	A refined finite element model for UHPC-filled FRP tube column	117393
Jeyakarthikeyan, P. V. / Subramaniam, Siddarth / Charuasia, Vikalp / Vengatesan, S. / Bui, Tinh Quoc	Richardson extrapolation based integration scheme using FSDT over Quad elements: Application to thick FGM plates	117351
Heieck, Frieder / Kuon, Christoph / Miene, Andrea / Middendorf, Peter / Herrmann, Axel S.	Scatter of mechanical properties of 2D biaxial and triaxial braided reinforced composites and their correlation with visual features	117409
Li, Zhi / Xiao, Di / Wang, Rui	Strength properties of unidirectional laminated engineered bamboo boards under off-axis tension and compression tests	117405
Fink, Axel / Schatz, Rolf	Structurally integrated constrained layer damping for noise reduction on sandwich and semi-monocoque helicopter structures	117354
Xu, Yimeng / Zhu, Pengzhe / Wang, Wenzhong	Study of multiple impact behaviors of CFRP based on peridynamics	117380
Xu, Jiawen / Chang, Lijun / Chen, Taiwei / Ren, Tong / Zhang, Yan / Cai, Zhihua	Study of the bending properties of variable stiffness chain mail fabrics	117369
Zhao, Ying / Wang, Yicheng / Hao, Jibo / Wang, Yueqiang / Wang, Kechao / Tai, Shaoyu	Study on mechanical properties of cellular structures with negative Poisson's ratio based on the development of Abaqus plug-in tool	117348
Roeper, Florian / Sommacal, Silvano / Compston, Paul / Tauchner, Jürgen / Wolfahrt, Markus / Pinter, Gerald	Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs	117338
Sim, Kyeng-Bo / Lee, Tae-Hyung / Han, Gi-Yeon / Kim, Hyun-Joong	Thermal expansion and mechanical properties of urethane-modified epoxy bonded CFRP/steel joints at low and high temperatures for automotive	117426
Wu, Tongyu / Meguid, S. A.	Thermo-electro-mechanical shape morphing of structures using smart piezoelectric laminates	117371
Zhang, Yinxiao / Gong, Zheng / Pan, Ernian / Zhang, Chao	Three-dimensional analytical elasticity solutions in isosceles-right triangular composite laminates	117398
Guo, Dongliang / Jiang, Shan / Zhou, Yunlei / Zhang, Lei / Li, Kan / Song, Bo / Huang, Yongan	Ultrahigh compression-shear ratio of sandwich pentamode metamaterials	117331
Huang, Chengyang / Lanza di Scalea, Francesco	An ultrasonic scanning system for the inspection of composite stiffened panels from elastic constant identification via inversion of guided waves	117373
Zhang, Pei / Schiavone, Peter / Qing, Hai	A unified local-nonlocal integral formulation for dynamic stability of FG porous viscoelastic Timoshenko beams resting on nonlocal Winkler-Pasternak foundation	117416
Barroso, Viviane Setti / Andrade, Anísio / Providência, Paulo / Challamel, Noël	A von Kármán-type model for two-layer laminated glass plates, with applications to buckling and free vibration under in-plane edge loads	117287

About this
data sheet
IssueID
70212
Published on:
04/08/2023
Last updated on:
04/08/2023

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - October 2023

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - October 2023

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.