Composite Structures - April 2013

Published:	April 2013

Articles in this Issue

Author(s)	Title	Page(s)
Ray, M. C. / Reddy, J. N.	Active damping of laminated cylindrical shells conveying fluid using 1–3 piezoelectric composites	261-271
Sousa, C. S. / Camanho, P. P. / Suleman, A.	Analysis of multistable variable stiffness composite plates	34-46
Barbero, E. J. / Cosso, F. A. / Campo, F. A.	Benchmark solution for degradation of elastic properties due to transverse matrix cracking in laminated composites	242-252
Lei, Z. X. / Liew, K. M. / Yu, J. L.	Buckling analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-Ritz method	160-168
Kim, Ki Hyun / Lim, Jun Woo / Kim, Minkook / Lee, Dai Gil	Development of carbon fabric/graphite hybrid bipolar plate for PEMFC	103-110
Shen, C. J. / Lu, G. / Yu, T. X.	Dynamic behavior of graded honeycombs – A finite element study	282-293
Thinh, Tran Ich / Nguyen, Manh Cuong	Dynamic stiffness matrix of continuous element for vibration of thick cross-ply laminated composite cylindrical shells	93-102
Wu, Yu-Fei / Jiang, Cheng	Effect of load eccentricity on the stress–strain relationship of FRP-confined concrete columns	228-241
Karimi, Navid Zarif / Heidary, Hossein / Minak, Giangiacomo / Ahmadi, Mehdi	Effect of the drilling process on the compression behavior of glass/epoxy laminates	59-68
Yaqoob Yasin, M. / Kapuria, S.	An efficient layerwise finite element for shallow composite and sandwich shells	202-214
Sharma, Rajneesh / Mahajan, Puneet / Mittal, Ramesh Kumar	Elastic modulus of 3D carbon/carbon composite using image-based finite element simulations and experiments	69-78
Jin, Fengnian / Chen, Hailong / Zhao, Long / Fan, Hualin / Cai, Chuanguo / Kuang, Ning	Failure mechanisms of sandwich composites with orthotropic integrated woven corrugated cores: Experiments	53-58
Zhang, Chao / Xu, Xiwu	Finite element analysis of 3D braided composites based on three unit-cells models	130-142
Akgöz, Bekir / Civalek, Ömer	Free vibration analysis of axially functionally graded tapered Bernoulli–Euler microbeams based on the modified couple stress theory	314-322
Prabhakar, Pavana / Waas, Anthony M.	Interaction between kinking and splitting in the compressive failure of unidirectional fiber reinforced laminated composites	85-92
Khalili, S. M. R. / Haghbin, A.	Investigation on design parameters of single-walled carbon nanotube reinforced nanocomposites under impact loads	253-260
Li, Dinghe / Qing, Guanghui / Liu, Yan	A layerwise/solid-element method for the composite stiffened laminated cylindrical shell structures	215-227
Ascione, Luigi / Berardi, Valentino Paolo / Giordano, Antonella / Spadea, Saverio	Local buckling behavior of FRP thin-walled beams: A mechanical model	111-120
Pilipchuk, V. N. / Ibrahim, R. A. / Grace, I.	Low temperature brittle debond damage under normal compression of sandwich plates: Analytical modeling and experimental validation	24-33
Wang, Zhengjin / Qin, Qinghua / Zhang, Jianxun / Wang, T. J.	Low-velocity impact response of geometrically asymmetric slender sandwich beams with metal foam core	1-14
D'Ambrisi, Angelo / Feo, Luciano / Focacci, Francesco	Masonry arches strengthened with composite unbonded tendons	323-329
Correia, João R. / Gomes, Marco M. / Pires, José M. / Branco, Fernando A.	Mechanical behaviour of pultruded glass fibre reinforced polymer composites at elevated temperature: Experiments and model assessment	303-313
Botshekanan Dehkordi, M. / Cinefra, M. / Khalili, S. M. R. / Carrera, E.	Mixed LW/ESL models for the analysis of sandwich plates with composite faces	330-339
Esquej, R. / Castejón, L. / Lizaranzu, M. / Carrera, M. / Miravete, A. / Miralbes, R.	A new finite element approach applied to the free edge effect on composite materials	121-129
Arbind, A. / Reddy, J. N.	Nonlinear analysis of functionally graded microstructure-dependent beams	272-281
Xu, Yu-Mou / Shen, Hui-Shen / Zhang, Chen-Li	Nonlocal plate model for nonlinear bending of bilayer graphene sheets subjected to transverse loads in thermal environments	294-302
Sliseris, Janis / Rocens, Karlis	Optimal design of composite plates with discrete variable stiffness	15-23
Na, S. / Lee, H. K.	Steel wire electromechanical impedance method using a piezoelectric material for composite structures with complex surfaces	79-84
Yin, Sha / Wu, Linzhi / Nutt, Steven	Stretch–bend-hybrid hierarchical composite pyramidal lattice cores	153-159
Jiang, X. / Kolstein, M. H. / Bijlaard, F. S. K.	Study on mechanical behaviors of FRP-to-steel adhesively-bonded joint under tensile loading	192-201
Cai, Yongming / Sun, Huiyu	Thermo-viscoelastic analysis of three-dimensionally braided composites	47-52
Qu, Yegao / Long, Xinhua / Wu, Shihao / Meng, Guang	A unified formulation for vibration analysis of composite laminated shells of revolution including shear deformation and rotary inertia	169-191
Komijani, M. / Kiani, Y. / Esfahani, S. E. / Eslami, M. R.	Vibration of thermo-electrically post-buckled rectangular functionally graded piezoelectric beams	143-152

About this
data sheet
IssueID
37890
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - April 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - April 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.