Composite Structures - January 2014

Published:	January 2014

Articles in this Issue

Author(s)	Title	Page(s)
Martinelli, Enzo / Napoli, Annalisa / Nunziata, Bruno / Realfonzo, Roberto	A 1D finite element model for the flexural behaviour of RC beams strengthened with MF-FRP strips	190-204
Lopez, R. H. / Miguel, L. F. F. / Belo, I. M. / Souza Cursi, J. E.	Advantages of employing a full characterization method over FORM in the reliability analysis of laminated composite plates	635-642
Li, Juan / Zheng, Bailin / Yang, Qing / Hu, Xingjian	Analysis on time-dependent behavior of laminated functionally graded beams with viscoelastic interlayer	30-35
Su, Y.-Y. / Gao, X.-L.	Analytical model for adhesively bonded composite panel-flange joints based on the Timoshenko beam theory	112-118
Sayyaadi, Hassan / Farsangi, Mohammad Amin Askari	An analytical solution for dynamic behavior of thick doubly curved functionally graded smart panels	88-102
Tabatabaei, S. A. / Lomov, S. V. / Verpoest, I.	Assessment of embedded element technique in meso-FE modelling of fibre reinforced composites	436-446
Moleiro, F. / Mota Soares, C. M. / Mota Soares, C. A. / Reddy, J. N.	Benchmark exact solutions for the static analysis of multilayered piezoelectric composite plates using PVDF	389-395
Schmitz, A. / Horst, P.	Bending deformation limits of corrugated unidirectionally reinforced composites	103-111
Li, Shuangbei / Huang, Lixin / Jiang, Linjie / Qin, Rong	A bidirectional B-spline finite point method for the analysis of piezoelectric laminated composite plates and its application in material parameter identification	346-362
Groh, R. M. J. / Weaver, P. M.	Buckling analysis of variable angle tow, variable thickness panels with transverse shear effects	482-493
Ni, Zao / Yuan, Jianfeng / Chen, Baoxing	Buckling of the SS–C–SS–C symmetrical composite rectangular plate under linear-varying in-plane load	528-536
Galuppi, Laura / Royer-Carfagni, Gianni	Buckling of three-layered composite beams with viscoelastic interaction	512-521
Arian Nik, Mahdi / Fayazbakhsh, Kazem / Pasini, Damiano / Lessard, Larry	A comparative study of metamodeling methods for the design optimization of variable stiffness composites	494-501
Qi, Zhenchao / Zhang, Kaifu / Li, Yuan / Liu, Shunuan / Cheng, Hui	Critical thrust force predicting modeling for delamination-free drilling of metal-FRP stacks	604-609
Yu, Young Ho / Choi, Ilbeom / Nam, Soohyun / Lee, Dai Gil	Cryogenic characteristics of chopped glass fiber reinforced polyurethane foam	476-481
Kim, Seong J. / Hayat, Khazar / Nasir, Sana U. / Ha, Sung K.	Design and fabrication of hybrid composite hubs for a multi-rim flywheel energy storage system	19-29
Hu, Keqiang / Chen, Zengtao / Fu, Jiawei	Dynamic analysis of an interface crack between magnetoelectroelastic and functionally graded elastic layers under anti-plane mechanical and in-plane electro-magnetic loadings	142-148
Lee, Dongyoung / Kim, Ki Hyun / Choi, Ilbeom / Lee, Dai Gil	Dynamic properties of the corrugated stainless steel membrane reinforced with the glass composite pressure resisting structure for LNG carriers	382-388
Hong, Minwoo / Park, Ilwook / Lee, Usik	Dynamics and waves characteristics of the FGM axial bars by using spectral element method	585-593
Sayem Uddin, Md. / Morozov, Evgeny V. / Shankar, Krishnakumar	The effect of filament winding mosaic pattern on the stress state of filament wound composite flywheel disk	260-275
Telford, R. / Katnam, K. B. / Young, T. M.	The effect of moisture ingress on through-thickness residual stresses in unsymmetric composite laminates: A combined experimental–numerical analysis	502-511
Gray, P. J. / O'Higgins, R. M. / McCarthy, C. T.	Effect of thickness and laminate taper on the stiffness, strength and secondary bending of single-lap, single-bolt countersunk composite joints	315-324
Gray, P. J. / O'Higgins, R. M. / McCarthy, C. T.	Effects of laminate thickness, tapering and missing fasteners on the mechanical behaviour of single-lap, multi-bolt, countersunk composite joints	219-230
Sun, Yongtao / Chen, Qiang / Pugno, Nicola	Elastic and transport properties of the tailorable multifunctional hierarchical honeycombs	698-710
Iurlaro, L. / Gherlone, M. / Di Sciuva, M.	Energy based approach for shape parameter selection in radial basis functions collocation method	70-78
Kim, H. K. / Nam, I. W. / Lee, H. K.	Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume	60-69
Lin, Xiaoshan / Zhang, Y. X.	Evaluation of bond stress-slip models for FRP reinforcing bars in concrete	131-141
Bowyer, E. P. / Krylov, V. V.	Experimental investigation of damping flexural vibrations in glass fibre composite plates containing one- and two-dimensional acoustic black holes	406-415
Mahroug, M. E. M. / Ashour, A. F. / Lam, D.	Experimental response and code modelling of continuous concrete slabs reinforced with BFRP bars	664-674
Cahill, L. M. A. / Natarajan, S. / Bordas, S. P. A. / O'Higgins, R. M. / McCarthy, C. T.	An experimental/numerical investigation into the main driving force for crack propagation in uni-directional fibre-reinforced composite laminae	119-130
Lee, Chi-Seung / Lee, Jae-Myung	Failure analysis of reinforced polyurethane foam-based LNG insulation structure using damage-coupled finite element analysis	231-245
De Domenico, D. / Pisano, A. A. / Fuschi, P.	A FE-based limit analysis approach for concrete elements reinforced with FRP bars	594-603
Khalili, S. M. R. / Shariyat, M. / Rajabi, I.	A finite element based global–local theory for static analysis of rectangular sandwich and laminated composite plates	177-189
Alaimo, A. / Benedetti, I. / Milazzo, A.	A finite element formulation for large deflection of multilayered magneto-electro-elastic plates	643-653
Nam, Soohyun / Yu, Young Ho / Choi, Ilbeom / Bang, Chang Seon / Lee, Dai Gil	Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures	522-527
Bodaghi, M. / Damanpack, A. R. / Aghdam, M. M. / Shakeri, M.	Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors	48-59
Zhu, Ping / Zhang, L. W. / Liew, K. M.	Geometrically nonlinear thermomechanical analysis of moderately thick functionally graded plates using a local Petrov–Galerkin approach with moving Kriging interpolation	298-314
Choe, Jaeheon / Kim, Ki Hyun / Lee, Dongyoung / Bang, Chang Seon / Lee, Dai Gil	Glass composite vibration isolating structure for the LNG cargo containment system	469-475
Ferreira, Rafael T. L. / Rodrigues, Helder C. / Guedes, José M. / Hernandes, José A.	Hierarchical optimization of laminated fiber reinforced composites	246-259
Rocha, I. B. C. M. / Parente, E. / Melo, A. M. C.	A hybrid shared/distributed memory parallel genetic algorithm for optimization of laminate composites	288-297
Colombo, Chiara / Vergani, Laura	Influence of delamination on fatigue properties of a fibreglass composite	325-333
Sofiyev, A. H.	The influence of non-homogeneity on the frequency–amplitude characteristics of laminated orthotropic truncated conical shell	334-345
Guo, Yujie / Nagy, Attila P. / Gürdal, Zafer	A layerwise theory for laminated composites in the framework of isogeometric analysis	447-457
Kiani, Keivan	Longitudinal and transverse instabilities of moving nanoscale beam-like structures made of functionally graded materials	610-619
Aydogdu, Metin	Longitudinal wave propagation in multiwalled carbon nanotubes	578-584
Chai, Gin Boay / Manikandan, Periyasamy	Low velocity impact response of fibre-metal laminates – A review	363-381
Carozzi, Francesca Giulia / Milani, Gabriele / Poggi, Carlo	Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures	711-725
Shamsudin, M. H. / York, C. B.	Mechanically coupled laminates with balanced plain weave	416-428
Ferreira, Luis Miguel / Graciani, Enrique / París, Federico	Modelling the waviness of the fibres in non-crimp fabric composites using 3D finite element models with straight tows	79-87
Williams, Todd O.	A new, unified, theoretical framework for the formulation of general, nonlinear, single-scale shell theories	544-558
Pernas-Sánchez, J. / Artero-Guerrero, J. A. / Zahr Viñuela, J. / Varas, D. / López-Puente, J.	Numerical analysis of high velocity impacts on unidirectional laminates	629-634
Artero-Guerrero, J. A. / Pernas-Sánchez, J. / López-Puente, J. / Varas, D.	On the influence of filling level in CFRP aircraft fuel tank subjected to high velocity impacts	570-577
Irisarri, F.-X. / Lasseigne, A. / Leroy, F.-H. / Le Riche, R.	Optimal design of laminated composite structures with ply drops using stacking sequence tables	559-569
Loja, M. A. R. / Mota Soares, C. M. / Barbosa, J. I.	Optimization of magneto-electro-elastic composite structures using differential evolution	276-287
Arian Nik, Mahdi / Fayazbakhsh, Kazem / Pasini, Damiano / Lessard, Larry	Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement	160-166
Chronopoulos, Dimitrios / Ichchou, Mohamed / Troclet, Bernard / Bareille, Olivier	Predicting the broadband response of a layered cone-cylinder-cone shell	149-159
Rohwer, Klaus	' Remarks on "A simple first-order shear deformation theory for laminated composite plates"	748
Jing, Lin / Wang, Zhihua / Zhao, Longmao	Response of metallic cylindrical sandwich shells subjected to projectile impact—Experimental investigations	36-47
Gao, Y. / Chen, J. / Fox, D.	Shear effects on bending behaviour of CFRP floor panels	11-18
Choi, Se-Jin / Hong, Byung-Tak / Lee, Su-Jin / Won, Jong-Pil	Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites	537-543
Wang, X. / Shi, G.	A simple and accurate sandwich plate theory accounting for transverse normal strain and interfacial stress continuity	620-628
Tornabene, Francesco / Fantuzzi, Nicholas / Viola, Erasmo / Carrera, Erasmo	Static analysis of doubly-curved anisotropic shells and panels using CUF approach, differential geometry and differential quadrature method	675-697
Lehman, Jeremy / Lakes, Roderic S.	Stiff, strong, zero thermal expansion lattices via material hierarchy	654-663
Tserpes, K. I. / Karachalios, V. / Giannopoulos, I. / Prentzias, V. / Ruzek, R.	Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part I: Design, manufacturing and impact testing	726-736
Ruzek, R. / Kudrna, P. / Kadlec, M. / Karachalios, V. / Tserpes, K. I.	Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part II: Mechanical testing and validation	737-744
Liang, Sen / Liang, Keyao / Luo, Lei / Zhang, Qian / Wang, Changsong	Study on low-velocity impact of embedded and co-cured composite damping panels with numerical simulation method	1-10
Liu, B. / Xing, Y. F. / Eisenberger, M. / Ferreira, A. J. M.	Thickness-shear vibration analysis of rectangular quartz plates by a numerical extended Kantorovich method	429-435
Kumari, Poonam / Kapuria, Santosh / Rajapakse, R. K. N. D.	Three-dimensional extended Kantorovich solution for Levy-type rectangular laminated plates with edge effects	167-176
Alibeigloo, A.	Three-dimensional thermo-elasticity solution of sandwich cylindrical panel with functionally graded core	458-468
Mantari, J. L. / Guedes Soares, C.	A trigonometric plate theory with 5-unknowns and stretching effect for advanced composite plates	396-405
Grogan, D. M. / Leen, S. B. / Ó Brádaigh, C. M.	An XFEM-based methodology for fatigue delamination and permeability of composites	205-218

About this
data sheet
IssueID
37881
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - January 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - January 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.