Composite Structures - July 2015

Published:	July 2015

Articles in this Issue

Author(s)	Title	Page(s)
Jin, Chunhua / Wang, Xinwei	Accurate free vibration analysis of Euler functionally graded beams by the weak form quadrature element method	41-50
May, Michael / Ganzenmüller, Georg / Wolfrum, Johannes / Heimbs, Sebastian	Analysis of composite T-joint designs for enhanced resistance to hydrodynamic ram	188-194
Garcia-Avila, Matias / Portanova, Marc / Rabiei, Afsaneh	Ballistic performance of composite metal foams	202-211
Jam, J. E. / Kiani, Y.	Buckling of pressurized functionally graded carbon nanotube reinforced conical shells	586-595
Heshmati, M. / Yas, M. H. / Daneshmand, F.	A comprehensive study on the vibrational behavior of CNT-reinforced composite beams	434-448
Olsson, Robin / Block, Tim B.	Criteria for skin rupture and core shear cracking induced by impact on sandwich panels	81-87
Lu, Shizeng / Jiang, Mingshun / Sui, Qingmei / Sai, Yaozhang / Jia, Lei	Damage identification system of CFRP using fiber Bragg grating sensors	400-406
Sasikumar, P. / Venketeswaran, A. / Suresh, R. / Gupta, Sayan	A data driven polynomial chaos based approach for stochastic analysis of CFRP laminated composite plates	212-227
Sun, Rui / Sevillano, Enrique / Perera, Ricardo	Debonding detection of FRP strengthened concrete beams by using impedance measurements and an ensemble PSO adaptive spectral model	374-387
Kiani, Keivan	Dynamic interactions of doubly orthogonal stocky single-walled carbon nanotubes	144-158
Suresh Kumar, C. / Arumugam, V. / Dhakal, H. N. / John, Risil	Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy composites	407-416
Li, Huimin / Zhang, Boming / Bai, Guanghui	Effects of constructing different unit cells on predicting composite viscoelastic properties	459-466
Taheri-Behrooz, F. / Shamaei Kashani, A. R. / Hefzabad, R. N.	Effects of material nonlinearity on load distribution in multi-bolt composite joints	195-201
Yu, Guo-Liang / Zhang, Huai-Wu / Li, Yuan-Xun / Li, Jie	Equivalent circuit method for resonant analysis of multilayer piezoelectric-magnetostrictive composite cantilever structures	467-476
Fabro, A. T. / Ferguson, N. S. / Gan, J. M. / Mace, B. R. / Bickerton, S. / Battley, M.	Estimation of random field material properties for chopped fibre composites and application to vibration modelling	1-12
Eremin, A. A. / Glushkov, E. V. / Glushkova, N. V. / Lammering, R.	Evaluation of effective elastic properties of layered composite fiber-reinforced plastic plates by piezoelectrically induced guided waves and laser Doppler vibrometry	449-458
Yan, J. W. / Tong, L. H. / Li, C. / Zhu, Y. / Wang, Z. W.	Exact solutions of bending deflections for nano-beams and nano-plates based on nonlocal elasticity theory	304-313
Del Rosso, Stefano / Iannucci, Lorenzo / Curtis, Paul T.	Experimental investigation of the mechanical properties of dry microbraids and microbraid reinforced polymer composites	509-519
Jiang, X. / Kolstein, M. H. / Bijlaard, F. S. K. / Qiang, X.	Experimental investigation on mechanical behavior of FRP-to-steel adhesively-bonded joint under combined loading-part 1: Before hygrothermal aging	672-686
Jiang, X. / Qiang, X. / Kolstein, M. H. / Bijlaard, F. S. K.	Experimental investigation on mechanical behaviour of FRP-to-steel adhesively-bonded joint under combined loading – Part 2: After hygrothermal ageing	687-697
Zhang, K. / Choi, H. J.	Fabrication and viscoelastic characteristics of amino-functionalized multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites	170-175
Wali, M. / Hentati, T. / Jarraya, A. / Dammak, F.	Free vibration analysis of FGM shell structures with a discrete double directors shell element	295-303
Xin, Libo / Hu, Zhendong	Free vibration of layered magneto-electro-elastic beams by SS-DSC approach	96-103
Kurtaran, Hasan	Geometrically nonlinear transient analysis of moderately thick laminated composite shallow shells with generalized differential quadrature method	605-614
Nguyen, Hai / Mutsuyoshi, Hiroshi / Zatar, Wael	Hybrid FRP-UHPFRC composite girders: Part 1 – Experimental and numerical approach	631-652
Nguyen, Hai / Zatar, Wael / Mutsuyoshi, Hiroshi	Hybrid FRP–UHPFRC composite girders: Part 2 – Analytical approach	653-671
Shrestha, Pratik / Kim, Jin-Hyuk / Park, Yurim / Kim, Chun-Gon	Impact localization on composite wing using 1D array FBG sensor and RMS/correlation based reference database algorithm	159-169
Liu, Chunchuan / Li, Fengming	Impact transient response in lattice sandwich panels under various boundaries using reverberation ray matrix method	239-246
Akatay, Abdullah / Bora, Mustafa Özgür / Çoban, Onur / Fidan, Sinan / Tuna, Volkan	The influence of low velocity repeated impacts on residual compressive properties of honeycomb sandwich structures	425-433
Zhou, J. / Guan, Z. W. / Cantwell, W. J.	The influence of strain-rate on the perforation resistance of fiber metal laminates	247-255
Kravchenko, Sergii G. / Kravchenko, Oleksandr G. / Carlsson, Leif A. / Pipes, R. Byron	Influence of through-thickness reinforcement aspect ratio on mode I delamination fracture resistance	13-22
Ye, Junjie / Qiu, Yuanying / Chen, Xuefeng / Ma, Juan	Initial and final failure strength analysis of composites based on a micromechanical method	328-335
Shi, Jin-Xing / Shimoda, Masatoshi	Interface shape optimization of designing functionally graded sandwich structures	88-95
Awrejcewicz, Jan / Kurpa, Lidiya / Shmatko, Tatiana	Investigating geometrically nonlinear vibrations of laminated shallow shells with layers of variable thickness via the R-functions theory	575-585
Bergmann, Tim / Heimbs, Sebastian / Maier, Martin	Mechanical properties and energy absorption capability of woven fabric composites under ±45° off-axis tension	362-373
Ashouri Vajari, Danial	A micromechanical study of porous composites under longitudinal shear and transverse normal loading	266-276
Montesano, John / Selezneva, Marina / Levesque, Martin / Fawaz, Zouheir	Modeling fatigue damage evolution in polymer matrix composite structures and validation using in-situ digital image correlation	354-361
Zhang, X. X. / Xiao, B. L. / Andrä, H. / Ma, Z. Y.	Multi-scale modeling of the macroscopic, elastic mismatch and thermal misfit stresses in metal matrix composites	176-187
Shen, Hui-Shen	Nonlinear analysis of functionally graded fiber reinforced composite laminated beams in hygrothermal environments, Part I: Theory and solutions	698-705
Shen, Hui-Shen	Nonlinear analysis of functionally graded fiber reinforced composite laminated beams in hygrothermal environments, Part II: Numerical results	706-712
Duc, Nguyen Dinh / Quan, Tran Quoc / Luat, Vu Dinh	Nonlinear dynamic analysis and vibration of shear deformable piezoelectric FGM double curved shallow shells under damping-thermo-electro-mechanical loads	29-40
Azrar, A. / Azrar, L. / Aljinaidi, A. A.	Numerical modeling of dynamic and parametric instabilities of single-walled carbon nanotubes conveying pulsating and viscous fluid	127-143
Gou, Jian-Jun / Zhang, Hu / Dai, Yan-Jun / Li, ShuGuang / Tao, Wen-Quan	Numerical prediction of effective thermal conductivities of 3D four-directional braided composites	499-508
Park, Yurim / Kim, YunHo / Baluch, Abrar H. / Kim, Chun-Gon	Numerical simulation and empirical comparison of the high velocity impact of STF impregnated Kevlar fabric using friction effects	520-529
Ayadi, Abderrahmane / Nouri, Hedi / Guessasma, Sofiane / Roger, Frederic	An original approach to assess elastic properties of a short glass fibre reinforced thermoplastic combining X-ray tomography and finite element computation	277-286
Kim, Jinsup / Kwon, Minho / Seo, Hyunsu / Jung, WooYoung	Performance evaluation of GIP wall systems for strengthening steel-frame structures	228-238
Fallah, F. / Vahidipoor, M. K. / Nosier, A.	Post-buckling behavior of functionally graded circular plates under asymmetric transverse and in-plane loadings	477-488
Chen, Qingyuan / Qiao, Pizhong	Post-buckling behavior of imperfect laminated composite plates with rotationally-restrained edges	117-126
Yan, J. W. / Liew, K. M.	Predicting elastic properties of single-walled boron nitride nanotubes and nanocones using an atomistic-continuum approach	489-498
Zhang, Chao / Li, Ning / Wang, Wenzhi / Binienda, Wieslaw K. / Fang, Hongbing	Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model	104-116
Kapidžić, Zlatan / Ansell, Hans / Schön, Joakim / Simonsson, Kjell	Quasi-static bearing failure of CFRP composite in biaxially loaded bolted joints	60-71
Burningham, Clayton A. / Pantelides, Chris P. / Reaveley, Lawrence D.	Repair of reinforced concrete deep beams using post-tensioned CFRP rods	256-265
Zhang, Jikui / Zhang, Xiang	Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact	51-57
Al-Basyouni, K. S. / Tounsi, Abdelouahed / Mahmoud, S. R.	Size dependent bending and vibration analysis of functionally graded micro beams based on modified couple stress theory and neutral surface position	621-630
Fang, Xue-Qian / Liu, Hong-wei / Feng, Wen-Jie / Liu, Jin-Xi	Size-dependent effects on electromechanical response of multilayer piezoelectric nano-cylinder under electro-elastic waves	23-28
Peeters, Daniël M. J. / Hesse, Simon / Abdalla, Mostafa M.	Stacking sequence optimisation of variable stiffness laminates with manufacturing constraints	596-604
Bartolozzi, Giorgio / Baldanzini, Niccolò / Pierini, Marco / Zonfrillo, Giovanni	Static and dynamic experimental validation of analytical homogenization models for corrugated core sandwich panels	343-353
Siska, Filip / Tawfeeq, Arwa F. / Dlouhy, Ivo / Barnett, Matthew R.	Stiffness and strength degradation of damaged truss core composites	287-294
Shitanoki, Yuki / Bennison, Stephen J. / Koike, Yasuhiro	Structural behavior thin glass ionomer laminates with optimized specific strength and stiffness	615-620
Anbusagar, NRR. / Palanikumar, K. / Giridharan, P. K.	Study of sandwich effect on nanoclay modified polyester resin GFR face sheet laminates	336-342
Pesic, Ninoslav / Pilakoutas, Kypros	Tensile stress-strain relaxation as a failure precursor for FRP-strengthened RC beams	530-541
Wong, E. H.	Thermal stresses in the discrete joints of sandwiched structures	72-80
Cetkovic, M.	Thermo-mechanical bending of laminated composite and sandwich plates using layerwise displacement model	388-399
Behravan Rad, A. / Shariyat, M.	Three-dimensional magneto-elastic analysis of asymmetric variable thickness porous FGM circular plates with non-uniform tractions and Kerr elastic foundations	558-574
Roh, Jin-Ho / Kim, Jin-Sung / Kwon, O-Hyun	Vibration behaviors of hybrid smart composites with SMA strips reinforced SMP lamina under blast loading	417-424
Afshar, A. / Daneshyar, A. / Mohammadi, S.	XFEM analysis of fiber bridging in mixed-mode crack propagation in composites	314-327
Vigueras, Guillermo / Sket, Federico / Samaniego, Cristóbal / Wu, Ling / Noels, Ludovic / Tjahjanto, Denny / Casoni, Eva / Houzeaux, Guillaume / Makradi, Ahmed / Molina-Aldareguia, Jon M. / Vázquez, Mariano / Jérusalem, Antoine	An XFEM/CZM implementation for massively parallel simulations of composites fracture	542-557

About this
data sheet
IssueID
37863
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - July 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - July 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.