Composite Structures - November 2015

Published:	November 2015

Articles in this Issue

Author(s)	Title	Page(s)
Li, Chao / Tong, Liyong	2D fracture analysis of magnetoelectroelastic composites by the SBFEM	984-994
Naouar, N. / Vidal-Salle, E. / Schneider, J. / Maire, E. / Boisse, P.	3D composite reinforcement meso F.E. analyses based on X-ray computed tomography	1094-1104
Djojodihardjo, Harijono / Jafari, Mohammad / Wiriadidjaja, Surjatin / Ahmad, Kamarul Arifin	Active Vibration Suppression of an elastic piezoelectric sensor and actuator fitted cantilevered beam configurations as a generic smart composite structure	848-863
Pan, Haizhu / Song, Tianshu / Wang, Zhihai	An analytical model for collinear cracks in functionally graded materials with general mechanical properties	359-371
Neagoe, Catalin A. / Gil, Lluís	Analytical procedure for the design of PFRP-RC hybrid beams including shear interaction effects	122-135
Barbero, Ever J. / Cabrera Barbero, Javier / Navarro Ugena, Carlos	Analytical solution for plane stress/strain deformation of laminates with matrix cracks	621-632
Alipour, M. M. / Shariyat, M.	Analytical zigzag formulation with 3D elasticity corrections for bending and stress analysis of circular/annular composite sandwich plates with auxetic cores	175-197
Katili, Irwan / Maknun, Imam Jauhari / Hamdouni, Aziz / Millet, Olivier	Application of DKMQ element for composite plate bending structures	166-174
Sreekumar, P. / Ramadas, C. / Anand, Anoop / Joshi, Makarand	Attenuation of Ao Lamb mode in hybrid structural composites with nanofillers	198-204
Khshain, Nihad Tareq / Al-Mahaidi, Riadh / Abdouka, Kamiran	Bond behaviour between NSM CFRP strips and concrete substrate using single-lap shear testing with epoxy adhesive	205-214
Sofiyev, A. H.	Buckling analysis of freely-supported functionally graded truncated conical shells under external pressures	746-758
Hajlaoui, A. / Jarraya, A. / El Bikri, K. / Dammak, F.	Buckling analysis of functionally graded materials structures with enhanced solid-shell elements and transverse shear correction	87-97
Di Sciuva, Marco / Gherlone, Marco / Iurlaro, Luigi / Tessler, Alexander	A class of higher-order C0 composite and sandwich beam elements based on the Refined Zigzag Theory	784-803
Agnese, Fabio / Remillat, Chrystel / Scarpa, Fabrizio / Payne, Chris	Composite chiral shear vibration damper	215-225
Fakhrabadi, Mir Masoud Seyyed / Yang, Jie	Comprehensive nonlinear electromechanical analysis of nanobeams under DC/AC voltages based on consistent couple-stress theory	1206-1218
Coda, H. B.	Continuous inter-laminar stresses for regular and inverse geometrically non linear dynamic and static analyses of laminated plates and shells	406-422
Yu, Young Ho / Nam, Soohyun / Lee, Dongyoung / Lee, Dai Gil	Cryogenic impact resistance of chopped fiber reinforced polyurethane foam	12-19
Wong, Tsz-ting / Lau, Kin-tak / Tam, Wai-yin / Leng, Jinsong / Wang, Wenxin / Li, Wenbing / Wei, Hongqiu	Degradation of nano-ZnO particles filled styrene-based and epoxy-based SMPs under UVA exposure	1056-1064
Long, Shuchang / Yao, Xiaohu / Zhang, Xiaoqing	Delamination prediction in composite laminates under low-velocity impact	290-298
Nakayama, Masahiro / Uda, Nobuhide / Ono, Kousei / Takeda, Shin-ichi / Morimoto, Tetsuya	Design-oriented strength of mechanical joints in composite laminate structures and reliability-based design factor	1-11
Kärger, Luise / Bernath, Alexander / Fritz, Florian / Galkin, Siegfried / Magagnato, Dino / Oeckerath, André / Schön, Alexander / Henning, Frank	Development and validation of a CAE chain for unidirectional fibre reinforced composite components	350-358
Khan, K. / Patel, B. P. / Nath, Y.	Dynamic characteristics of bimodular laminated panels using an efficient layerwise theory	759-771
Kavousi Sisi, M. / Shakeri, M. / Sadighi, M.	Dynamic response of composite laminated beams under asynchronous/repeated low-velocity impacts of multiple masses	960-973
Alam, Md Iftekharul / Fawzia, Sabrina / Liu, Xuemei	Effect of bond length on the behaviour of CFRP strengthened concrete-filled steel tubes under transverse impact	898-914
Garzón-Roca, Julio / Sena-Cruz, José M. / Fernandes, Pedro / Xavier, José	Effect of wet-dry cycles on the bond behaviour of concrete elements strengthened with NSM CFRP laminate strips	331-340
Eder, M. A. / Bitsche, R. D. / Belloni, F.	Effects of geometric non-linearity on energy release rates in a realistic wind turbine blade cross section	1075-1084
Assarar, Mustapha / Zouari, Wajdi / Sabhi, Hamid / Ayad, Rezak / Berthelot, Jean-Marie	Evaluation of the damping of hybrid carbon–flax reinforced composites	148-154
Liu, X. / Banerjee, J. R.	An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies – Part I: Theory	1274-1287
Liu, X. / Banerjee, J. R.	An exact spectral-dynamic stiffness method for free flexural vibration analysis of orthotropic composite plate assemblies – Part II: Applications	1288-1302
Yang, Bin / Wang, Zhenqing / Zhou, Limin / Zhang, Jifeng / Liang, Wenyan	Experimental and numerical investigation of interply hybrid composites based on woven fabrics and PCBT resin subjected to low-velocity impact	464-476
Xu, Wu / Thorsson, Solver I. / Waas, Anthony M.	Experimental and numerical study on cross-ply woven textile composite with notches and cracks	816-824
Bedsole, Robert W. / Bogert, Philip B. / Tippur, Hareesh V.	An experimental investigation of interlaminar and intralaminar dynamic fracture of CFRPs: Effect of matrix modification using carbon nanotubes	1043-1055
Leanos, Alma L. / Prabhakar, Pavana	Experimental investigation of thermal shock effects on carbon–carbon composites	372-383
Weiß, L. / Hühne, C.	Experimental investigation on the deformation of CFRP cylinders using piezo-actuators	944-951
Gigliotti, L. / Pinho, S. T.	Exploiting symmetries in solid-to-shell homogenization, with application to periodic pin-reinforced sandwich structures	995-1005
Debski, Hubert / Jonak, Józef	Failure analysis of thin-walled composite channel section columns	567-574
He, Zongbei / Zhang, Litong / Chen, Bo / Liu, Yongsheng / Liu, Xiaoying	Failure behavior of 2D C/SiC I-beam under bending load	321-330
Chanteli, Aggeliki / Tserpes, Konstantinos I.	Finite element modeling of carbon nanotube agglomerates in polymers	1141-1148
Lammens, Nicolas / Luyckx, Geert / Voet, Eli / Van Paepegem, Wim / Degrieck, Joris	Finite element prediction of resin pocket geometry around embedded optical fiber sensors in prepreg composites	825-832
Hack, Erwin / Fruehmann, Richard K. / Roos, René / Feligiotti, Mara / Schuetz, Philipp / Tyler, John P. / Dulieu-Barton, Janice M.	Flaw and damage assessment in torsionally loaded CFRP cylinders using experimental and numerical methods	109-121
Hayat, Khazar / Ha, Sung Kyu	Flutter performance of large-scale wind turbine blade with shallow-angled skins	575-583
Su, Zhu / Jin, Guoyong / Wang, Xueren	Free vibration analysis of laminated composite and functionally graded sector plates with general boundary conditions	720-736
Mantari, J. L. / Ore, M.	Free vibration of single and sandwich laminated composite plates by using a simplified FSDT	952-959
Tabatabaei, Seyed Ahmad / Swolfs, Yentl / Wu, Haoran / Lomov, Stepan V.	Full-field strain measurements and meso-FE modelling of hybrid carbon/self-reinforced polypropylene	864-873
Nazemizadeh, Mostafa / Bakhtiari-Nejad, Firooz	A general formulation of quality factor for composite micro/nano beams in the air environment based on the nonlocal elasticity theory	772-783
Yoon, Kyungho / Lee, Phill-Seung / Kim, Do-Nyun	Geometrically nonlinear finite element analysis of functionally graded 3D beams considering warping effects	1231-1247
Liu, Yijie / Han, Qiang / Li, Chunlei / Liu, Xiucheng / Wu, Bin	Guided wave propagation and mode differentiation in the layered magneto-electro-elastic hollow cylinder	558-566
Ying, Zhang / Xianggao, Li / Bin, Chen / Fei, Chen / Jing, Feng	Highly exfoliated epoxy/clay nanocomposites: Mechanism of exfoliation and thermal/mechanical properties	44-49
Wang, Bo / Tian, Kuo / Hao, Peng / Cai, Yuanwu / Li, Yuwei / Sun, Yu	Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method	136-147
Zakaria, Muhammad Razlan / Akil, Hazizan Md. / Abdul Kudus, Muhammad Helmi / Kadarman, A. Halim	Improving flexural and dielectric properties of MWCNT/epoxy nanocomposites by introducing advanced hybrid filler system	50-64
Peng, Tishun / Liu, Yongming / Saxena, Abhinav / Goebel, Kai	In-situ fatigue life prognosis for composite laminates based on stiffness degradation	155-165
Zheng, Y. / Li, C. H. / Yang, J. B. / Sun, C.	Influence of arching action on shear behaviour of laterally restrained concrete slabs reinforced with GFRP bars	20-34
Kharghani, N. / Guedes Soares, C.	Influence of different parameters on the deflection of composite laminates containing through-the-width delamination using Layerwise HSDT	341-349
Ghazlan, Abdallah / Ngo, Tuan D. / Tran, Phuong	Influence of interfacial geometry on the energy absorption capacity and load sharing mechanisms of nacreous composite shells	299-309
Zhu, Jun / Wang, Jihui / Zu, Lei	Influence of out-of-plane ply waviness on elastic properties of composite laminates under uniaxial loading	440-450
Isart, N. / El Said, B. / Ivanov, D. S. / Hallett, S. R. / Mayugo, J. A. / Blanco, N.	Internal geometric modelling of 3D woven composites: A comparison between different approaches	1219-1230
Steuben, John / Michopoulos, John / Iliopoulos, Athanasios / Turner, Cameron	Inverse characterization of composite materials via surrogate modeling	694-708
Yetman, J. E. / Sobey, A. J. / Blake, J. I. R. / Shenoi, R. A.	Investigation into skin stiffener debonding of top-hat stiffened composite structures	1168-1181
Nguyen, Khuong D. / Nguyen-Xuan, H.	An isogeometric finite element approach for three-dimensional static and dynamic analysis of functionally graded material plate structures	423-439
Zhang, L. W. / Liew, K. M.	Large deflection analysis of FG-CNT reinforced composite skew plates resting on Pasternak foundations using an element-free approach	974-983
Todoroki, Akira / Ohara, Keisuke / Mizutani, Yoshihiro / Suzuki, Yoshiro / Matsuzaki, Ryosuke	Lightning strike damage detection at a fastener using self-sensing TDR of composite plate	1105-1112
Wang, Y. / Zhupanska, O. I.	Lightning strike thermal damage model for glass fiber reinforced polymer matrix composites and its application to wind turbine blades	1182-1191
Hohe, Jörg	Load and frequency interaction effects in dynamic buckling of soft core sandwich structures	1006-1018
Jam, J. E. / Kiani, Y.	Low velocity impact response of functionally graded carbon nanotube reinforced composite beams in thermal environment	35-43
Kim, Minkook / Choe, Jaeheon / Lim, Jun Woo / Lee, Dai Gil	Manufacturing of the carbon/phenol composite bipolar plates for PEMFC with continuous hot rolling process	1122-1128
Duc, Nguyen Dinh / Cong, Pham Hong / Anh, Vu Minh / Quang, Vu Dinh / Tran, Phuong / Tuan, Ngo Duc / Thinh, Nguyen Hoa	Mechanical and thermal stability of eccentrically stiffened functionally graded conical shell panels resting on elastic foundations and in thermal environment	597-609
Kim, Kwangwon / Ju, Jaehyung	Mechanical metamaterials with 3D compliant porous structures	874-884
Spanos, K. N. / Georgantzinos, S. K. / Anifantis, N. K.	Mechanical properties of graphene nanocomposites: A multiscale finite element prediction	536-544
Mandel, Ulrich / Taubert, Robin / Hinterhölzl, Roland	Mechanism based nonlinear constitutive model for composite laminates subjected to large deformations	98-108
Asadi, Amir / Raghavan, J.	Model for evolution of quasi-static transverse cracking in multiple plies of multidirectional polymer composite laminates	665-679
Yu, GuoLiang / Zhang, HuaiWu / Li, Yuan-Xun	Modeling of magnetoelectric composite nano-cantilever beam with surface effect	65-74
Ascione, Francesco / Lamberti, Marco / Razaqpur, Ghani	Modifications of standard GFRP sections shape and proportions for improved stiffness and lateral-torsional stability	265-289
Sedighi, Hamid M. / Daneshmand, Farhang / Abadyan, Mohamadreza	Modified model for instability analysis of symmetric FGM double-sided nano-bridge: Corrections due to surface layer, finite conductivity and size effect	545-557
Aumjaud, P. / Fieldsend, J. E. / Boucher, M.-A. / Evans, K. E. / Smith, C. W.	Multi-objective optimisation of viscoelastic damping inserts in honeycomb sandwich structures	451-463
Coelho, P. G. / Guedes, J. M. / Rodrigues, H. C.	Multiscale topology optimization of bi-material laminated composite structures	495-505
Vasiukov, D. / Panier, S. / Hachemi, A.	Non-linear material modeling of fiber-reinforced polymers based on coupled viscoelasticity–viscoplasticity with anisotropic continuous damage mechanics	527-535
Barbera, Daniele / Laurenzi, Susanna	Nonlinear buckling and folding analysis of a storable tubular ultrathin boom for nanosatellites	226-238
Tajeddini, Vahid / Muliana, Anastasia	Nonlinear deformations of piezoelectric composite beams	1085-1093
Li, Ran / Natsuki, Toshiaki / Ni, Qing-Qing	A novel dynamic stress analysis in bimaterial composite with defect using ultrasonic wave propagation	255-264
Czapski, Paweł / Kubiak, Tomasz	Numerical and experimental investigations of the post-buckling behaviour of square cross-section composite tubes	1160-1167
Nasution, Muhammad Ridlo Erdata / Watanabe, Naoyuki / Kondo, Atsushi	Numerical study on thermal buckling of CFRP–Al honeycomb sandwich composites based on homogenization–localization analysis	709-719
Zhang, Yong / Lu, Minghao / Sun, Guangyong / Li, Guangyao / Li, Qing	On functionally graded composite structures for crashworthiness	393-405
Nikrad, S. F. / Asadi, H. / Akbarzadeh, A. H. / Chen, Z. T.	On thermal instability of delaminated composite plates	1149-1159
Barretta, Raffaele / Luciano, Raimondo / Willis, John R.	On torsion of random composite beams	915-922
Jagannathan, N. / Chandra, A. R. Anil / Manjunatha, C. M.	Onset-of-growth behavior of mode II delamination in a carbon fiber composite under spectrum fatigue loads	477-483
Kameyama, Masaki / Arai, Masahiro	Optimal design of symmetrically laminated plates for damping characteristics using lamination parameters	885-897
Nguyen, Xuan-Hoang / Kim, Nam-Il / Lee, Jaehong	Optimum design of thin-walled composite beams for flexural–torsional buckling problem	1065-1074
Hu, Y. L. / De Carvalho, N. V. / Madenci, E.	Peridynamic modeling of delamination growth in composite laminates	610-620
Milazzo, A. / Oliveri, V.	Post-buckling analysis of cracked multilayered composite plates by pb-2 Rayleigh–Ritz method	75-86
Anjang, A. / Chevali, V. S. / Lattimer, B. Y. / Case, S. W. / Feih, S. / Mouritz, A. P.	Post-fire mechanical properties of sandwich composite structures	1019-1028
Taczała, Maciej / Buczkowski, Ryszard / Kleiber, Michal	Postbuckling analysis of functionally graded plates on an elastic foundation	842-847
Dündar, Cengiz / Tanrikulu, Ahmed Kamil / Frosch, Robert J.	Prediction of load–deflection behavior of multi-span FRP and steel reinforced concrete beams	680-693
Maranan, G. B. / Manalo, A. C. / Karunasena, W. / Benmokrane, B.	Pullout behaviour of GFRP bars with anchor head in geopolymer concrete	1113-1121
Sakurayama, Naoya / Minakuchi, Shu / Takeda, Nobuo	Sensing and healing of disbond in composite stiffened panel using hierarchical system	833-841
Bui, Thi-Loan / Si Larbi, A. / Reboul, N. / Ferrier, E.	Shear behaviour of masonry walls strengthened by external bonded FRP and TRC	923-932
Xue, Jianghong / Wang, Yiou / Yuan, Ding	A shear deformation theory for bending and buckling of undersea sandwich pipes	633-643
Hwu, Chyanbin / Chang, H. W.	Singular integrals in boundary elements for coupled stretching–bending analysis of unsymmetric laminates	933-943
Li, Xiaobin / Guedes Soares, C.	Spectral finite element analysis of in-plane free vibration of laminated composite shallow arches	484-494
Nanda, Namita / Kapuria, Santosh	Spectral finite element for wave propagation analysis of laminated composite curved beams using classical and first order shear deformation theories	310-320
Bencardino, Francesco / Condello, Antonio	SRG/SRP–concrete bond–slip laws for externally strengthened RC beams	804-815
Filippi, M. / Pagani, A. / Petrolo, M. / Colonna, G. / Carrera, E.	Static and free vibration analysis of laminated beams by refined theory based on Chebyshev polynomials	1248-1259
Stefanou, George / Savvas, Dimitrios / Papadrakakis, Manolis	Stochastic finite element analysis of composite structures based on material microstructure	384-392
Tao, Yong / Chen, Mingji / Chen, Haosen / Pei, Yongmao / Fang, Daining	Strain rate effect on the out-of-plane dynamic compressive behavior of metallic honeycombs: Experiment and theory	644-651
Yang, Bin / Wang, Zhenqing / Zhou, Limin / Zhang, Jifeng / Tong, Lili / Liang, Wenyan	Study on the low-velocity impact response and CAI behavior of foam-filled sandwich panels with hybrid facesheet	1129-1140
Khazaeinejad, P. / Usmani, A. S. / Laghrouche, O.	Temperature-dependent nonlinear behaviour of thin rectangular plates exposed to through-depth thermal gradients	652-664
Zenkour, Ashraf M.	Three-dimensional thermal shock plate problem within the framework of different thermoelasticity theories	1029-1042
Liang, Xu / Kou, Hai-lei / Wang, Lizhong / Palmer, Andrew C. / Wang, Zhenyu / Liu, Guohua	Three-dimensional transient analysis of functionally graded material annular sector plate under various boundary conditions	584-596
Talebitooti, R. / Ahmadi, R. / Shojaeefard, M. H.	Three-dimensional wave propagation on orthotropic cylindrical shells with arbitrary thickness considering state space method	239-254
Santapuri, S. / Scheidler, J. J. / Dapino, M. J.	Two-dimensional dynamic model for composite laminates with embedded magnetostrictive materials	737-745
Di Capua, Daniel / Oñate, Eugenio	Two-noded zigzag beam element accounting for shear effects based on an extended Euler Bernoulli theory	1192-1205
Ghorbanpour Arani, A. / Kolahchi, R. / Zarei, M.Sh.	Visco-surface-nonlocal piezoelasticity effects on nonlinear dynamic stability of graphene sheets integrated with ZnO sensors and actuators using refined zigzag theory	506-526
Filiz, Seckin / Aydogdu, Metin	Wave propagation analysis of embedded (coupled) functionally graded nanotubes conveying fluid	1260-1273

About this
data sheet
IssueID
37856
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.