Composite Structures - December 2016

Published:	December 2016

Articles in this Issue

Author(s)	Title	Page(s)
Ojo, S. O. / Paggi, M.	A 3D coupled thermo-visco-elastic shear-lag formulation for the prediction of residual stresses in photovoltaic modules after lamination	348-359
Talebitooti, R. / Zarastvand, M. R. / Gheibi, M. R.	Acoustic transmission through laminated composite cylindrical shell employing Third order Shear Deformation Theory in the presence of subsonic flow	95-110
Eshaghi, Mehdi / Sedaghati, Ramin / Rakheja, Subhash	Analytical and experimental free vibration analysis of multi-layer MR-fluid circular plates under varying magnetic flux	78-86
Gigliotti, M. / Minervino, M. / Lafarie-Frenot, M. C.	Assessment of thermo-oxidative induced chemical strain by inverse analysis of shrinkage profiles in unidirectional composites	320-336
McGregor, Carla / Vaziri, Reza / Poursartip, Anoush / Xiao, Xinran	Axial crushing of triaxially braided composite tubes at quasi-static and dynamic rates	197-206
Cancellara, D. / De Angelis, F.	A base isolation system for structures subject to extreme seismic events characterized by anomalous values of intensity and frequency content	285-302
Amendola, A. / Carpentieri, G. / Feo, L. / Fraternali, F.	Bending dominated response of layered mechanical metamaterials alternating pentamode lattices and confinement plates	71-77
Zhang, Zhujing / Wu, Chao / Nie, Xin / Bai, Yu / Zhu, Lei	Bonded sleeve connections for joining tubular GFRP beam to steel member: Numerical investigation with experimental validation	51-61
Ansari, Reza / Torabi, Jalal / Shojaei, Mostafa Faghih / Hasrati, Emad	Buckling analysis of axially-loaded functionally graded carbon nanotube-reinforced composite conical panels using a novel numerical variational method	398-411
Singh, Durgesh Bahadur / Singh, B. N.	Buckling analysis of three dimensional braided composite plates under uniaxial loading using Inverse Hyperbolic Shear Deformation Theory	360-365
Khakimova, Regina / Zimmermann, Rolf / Wilckens, Dirk / Rohwer, Klaus / Degenhardt, Richard	Buckling of axially compressed CFRP truncated cones with additional lateral load: Experimental and numerical investigation	436-447
Lopatin, A. V. / Morozov, E. V. / Shatov, A. V.	Buckling of uniaxially compressed composite anisogrid lattice plate with clamped edges	187-196
Kolahchi, Reza / Hosseini, Hadi / Esmailpour, Masoud	Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories	174-186
Weckendorf, Jan / Ussher, Ebenezer / Smith, Ian	Dynamic response of CLT plate systems in the context of timber and hybrid construction	412-423
Yoo, Doo-Yeol / Banthia, Nemkumar / Kang, Su-Tae / Yoon, Young-Soo	Effect of fiber orientation on the rate-dependent flexural behavior of ultra-high-performance fiber-reinforced concrete	62-70
Seifi, Rahman / Avatefi, Moslem	Effects of internal pressure on bending buckling of imperfect functionally graded thin cylinders	12-24
Hosseini-Hashemi, Sh. / Ilkhani, M. R.	Exact solution for free vibrations of spinning nanotube based on nonlocal first order shear deformation shell theory	1-11
Xu, Jinyang / El Mansori, Mohamed	Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks	461-482
Gao, Peng / Gu, Xianglin / Mosallam, Ayman S.	Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates	33-50
Safdar, Muhammad / Matsumoto, Takashi / Kakuma, Ko	Flexural behavior of reinforced concrete beams repaired with ultra-high performance fiber reinforced concrete (UHPFRC)	448-460
Pan, Bing / Yu, Liping / Yang, Yongqi / Song, Weidong / Guo, Licheng	Full-field transient 3D deformation measurement of 3D braided composite panels during ballistic impact using single-camera high-speed stereo-digital image correlation	25-32
Wang, Zhonggang / Yao, Shuguang / Lu, Zhaijun / Hui, David / Feo, Luciano	Matching effect of honeycomb-filled thin-walled square tube—Experiment and simulation	494-505
Scotta, R. / Lazzari, M. / Stecca, E. / Di Massimo, R. / Vitaliani, R.	Membranes with embedded photovoltaic flexible cells: Structural and electrical performances under uniaxial and biaxial stresses	111-120
Poulios, Konstantinos / Niordson, Christian F.	Micro-buckling of periodically layered composites in regions of stress concentration	424-435
Netz, Johannes / Hannemann, Benedikt / Schmeer, Sebastian	Micro-leveled modeling of structural stitched FRP joints as energy absorbing rupture points	131-140
Chillara, V. S. C. / Headings, L. M. / Dapino, M. J.	Multifunctional composites with intrinsic pressure actuation and prestress for morphing structures	265-274
Thurnherr, C. / Ruppen, L. / Kress, G. / Ermanni, P.	Non-linear stiffness response of corrugated laminates in tensile loading	244-255
Singh, Vijay K. / Mahapatra, Trupti R. / Panda, Subrata K.	Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator	121-130
Promis, G. / Si Larbi, A. / Douzane, O.	Numerical and experimental investigation into the behaviour of strengthened hollow box beams made of unidirectional fibre-reinforced IPC matrix composite	87-94
Kandasamy, Ramkumar / Dimitri, Rossana / Tornabene, Francesco	Numerical study on the free vibration and thermal buckling behavior of moderately thick functionally graded structures in thermal environments	207-221
Beerhorst, M. / Hühne, C.	Optimization of axially compressed cylindrical grid structures using analytical and numerical models	155-162
Bacigalupo, A. / Morini, L. / Piccolroaz, A.	Overall thermomechanical properties of layered materials for energy devices applications	366-385
Gan, Nianfei / Feng, Yanan / Yin, Hanfeng / Wen, Guilin / Wang, Duohua / Huang, Xinyi	Quasi-static axial crushing experiment study of foam-filled CFRP and aluminum alloy thin-walled structures	303-319
Lee, Su-Jin / Won, Jong-Pil	Shrinkage characteristics of structural nano-synthetic fibre-reinforced cementitious composites	236-243
Guo, X. / Sun, X. / Tian, X. / Weng, G. J. / Ouyang, Q. D. / Zhu, L. L.	Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic	163-173
Biolzi, Luigi / Orlando, Maurizio / Piscitelli, Lorenzo Ruggero / Spinelli, Paolo	Static and dynamic response of progressively damaged ionoplast laminated glass beams	337-347
Kim, Nam-Il / Lee, Jaehong	Theory of thin-walled functionally graded sandwich beams with single and double-cell sections	141-154
Fan, Yin / Wang, Hai	Thermal postbuckling and vibration of postbuckled matrix cracked hybrid laminated plates containing carbon nanotube reinforced composite layers on elastic foundation	386-397
Machado, Martín / Cakmak, Umut D. / Kallai, Imre / Major, Zoltán	Thermomechanical viscoelastic analysis of woven-reinforced thermoplastic-matrix composites	256-264
Du, Meng / Geng, Qian / Li, Yue-ming	Vibrational and acoustic responses of a laminated plate with temperature gradient along the thickness	483-493
Shenas, Amin Ghorbani / Ziaee, Sima / Malekzadeh, Parviz	Vibrational behavior of rotating pre-twisted functionally graded microbeams in thermal environment	222-235
Nguyen, Sy-Tuan / To, Quy-Dong / Vu, Minh-Ngoc / Nguyen, The-Duong	Viscoelastic properties of heterogeneous materials: The case of periodic media containing cuboidal inclusions	275-284

About this
data sheet
IssueID
37831
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - December 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - December 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.