Composite Structures - March 2018

Published:	March 2018

Articles in this Issue

Author(s)	Title	Page(s)
Shariyat, M. / Behzad, H. / Shaterzadeh, A. R.	3D thermomechanical buckling analysis of perforated annular sector plates with multiaxial material heterogeneities based on curved B-spline elements	89-103
Pietrek, Martin / Horst, Peter	Analysis and numerical prediction of the delamination behavior of debonded asymmetric sandwich shells with a thin-walled skin considering plastic deformation	220-232
Sofiyev, A. H.	Application of the first order shear deformation theory to the solution of free vibration problem for laminated conical shells	340-346
Liu, Qinghui / Qiao, Pizhong	Buckling analysis of bilayer beam-columns with an asymmetric delamination	363-373
Xia, Qi / Shi, Tielin	A cascadic multilevel optimization algorithm for the design of composite structures with curvilinear fiber based on Shepard interpolation	209-219
Wu, C. / Viquerat, A.	Computational and experimental study on dynamic instability of extended bistable carbon/epoxy booms subjected to bending	347-355
Amin, Abdullah Al / Sabri, Laith / Poole, Charles / Baig, Tanvir / Deissler, Robert J. / Rindfleisch, Matthew / Doll, David / Tomsic, Michael / Akkus, Ozan / Martens, Michael	Computational homogenization of the elastic and thermal properties of superconducting composite MgB2 wire	313-329
Chan, Kit-Ying / Jia, Baohua / Lin, Han / Hameed, Nishar / Lee, Joong-Hee / Lau, Kin-tak	A critical review on multifunctional composites as structural capacitors for energy storage	126-142
Lurie, S. A. / Solyaev, Yu. O. / Koshurina, A. A. / Formalev, V. F. / Dobryanskiy, V. N. / Kachanov, M. L.	Design of the corrugated-core sandwich panel with external active cooling system	278-286
Wang, Guannan / Dong, Leiting / Atluri, Satya N.	Direct and inverse multi-scale analyses of arbitrarily functionally graded layered hollow cylinders (discs), with different shaped reinforcements, under harmonic loads	425-437
Sarasini, Fabrizio / Tirillò, Jacopo / Sergi, Claudia / Seghini, Maria Carolina / Cozzarini, Luca / Graupner, Nina	Effect of basalt fibre hybridisation and sizing removal on mechanical and thermal properties of hemp fibre reinforced HDPE composites	394-406
Jørgensen, Jeppe B. / Sørensen, Bent F. / Kildegaard, Casper	The effect of buffer-layer on the steady-state energy release rate of a tunneling crack in a wind turbine blade joint	64-71
Fu, B. / Teng, J. G. / Chen, G. M. / Chen, J. F. / Guo, Y. C.	Effect of load distribution on IC debonding in FRP-strengthened RC beams: Full-scale experiments	483-496
Reis, P. N. B. / Neto, M. A. / Amaro, A. M.	Effect of the extreme conditions on the tensile impact strength of GFRP composites	48-54
Chen, D. H. / Masuda, K.	Effects of honeycomb geometry on stress concentration due to defects	55-63
Wang, J. F. / Zhang, W.	An equivalent continuum meshless approach for material nonlinear analysis of CNT-reinforced composites	116-125
Zhang, Shengli / Liao, Lin / Song, Shuizhou / Zhang, Changsuo	Experimental and analytical study of the fibre distribution in SFRC: A comparison between image processing and the inductive test	78-88
Santarsiero, Manuel / Bedon, Chiara / Louter, Christian	Experimental and numerical analysis of thick embedded laminated glass connections	242-256
Xu, Ming-ming / Huang, Guang-yan / Dong, Yong-xiang / Feng, Shun-shan	An experimental investigation into the high velocity penetration resistance of CFRP and CFRP/aluminium laminates	450-460
Xu, Chenghai / Song, Leying / Zhu, Hanxing / Meng, Songhe / Xie, Weihua / Jin, Hua	Experimental investigation on the mechanical behaviour of 3D carbon/carbon composites under biaxial compression	7-14
Wang, Gong-Dong / Melly, Stephen Kirwa / Li, Nan	Experimental studies on a two-step technique to reduce delamination damage during milling of large diameter holes in CFRP/Al stack	330-339
Nguyen, Alex T. T. / Pichitdej, Natdanai / Brandt, Milan / Feih, Stefanie / Orifici, Adrian C.	Failure modelling and characterisation for pin-reinforced metal-composite joints	185-196
García-Guzmán, L. / Távara, L. / Reinoso, J. / Justo, J. / París, F.	Fracture resistance of 3D printed adhesively bonded DCB composite specimens using structured interfaces: Experimental and theoretical study	173-184
Jing, Zhao / Sun, Qin / Chen, Jian Qiao / Silberschmidt, Vadim V.	A framework for design and optimization of tapered composite structures. Part II: Enhanced design framework with a global blending model	531-552
Fallah Pour, Ali / Gholampour, Aliakbar / Ozbakkaloglu, Togay	Influence of the measurement method on axial strains of FRP-confined concrete under compression	415-424
Boon, Yi Di / Joshi, Sunil Chandrakant / Ong, Lin Seng	Interfacial bonding between CFRP and mechanically-treated aluminum liner surfaces for risers	374-386
Ueda, Masahito / Ui, Naoya / Ohtani, Akio	Lightweight and anti-corrosive fiber reinforced thermoplastic rivet	356-362
Ghayesh, Mergen H. / Farokhi, Hamed	Mechanics of tapered axially functionally graded shallow arches	233-241
Wang, Hu / Chen, Lei / Ye, Fan / Wang, Jian	A multi-hierarchical successive optimization method for reduction of spring-back in autoclave forming	143-158
Chen, Zhangxing / Huang, Tianyu / Shao, Yimin / Li, Yang / Xu, Hongyi / Avery, Katherine / Zeng, Danielle / Chen, Wei / Su, Xuming	Multiscale finite element modeling of sheet molding compound (SMC) composite structure based on stochastic mesostructure reconstruction	25-38
Massarwa, Eyass / Aboudi, Jacob / Haj-ali, Rami	A multiscale progressive damage analysis for laminated composite structures using the parametric HFGMC micromechanics	159-172
Grammatikos, Sotirios A. / Kordatos, Evangelos Z. / Matikas, Theodore E. / Paipetis, Alkiviadis S.	On the fatigue response of a bonded repaired aerospace composite using thermography	461-469
Madenci, E. / Barut, A. / Phan, N.	Peridynamic unit cell homogenization for thermoelastic properties of heterogenous microstructures with defects	104-115
Sathish Kumar, Sarath Kumar / Jurado-Manriquez, Edwin Antonio / Kim, YunHo / Choi, Chunghyeon / Baluch, Abrar H. / Kim, Chun-Gon	Polybenzimidazole (PBI) film coating for improved hypervelocity impact energy absorption for space applications	72-77
Choi, Hoi Kil / Son, Myeong Jin / Shin, Eui Sup / Yu, Jaesang	Prediction of thermo-poro-elastic properties of porous composites using an expanded unmixing-mixing model	387-393
Kotelnikova-Weiler, Natalia / Baverel, Olivier / Ducoulombier, Nicolas / Caron, Jean-François	Progressive damage of a unidirectional composite with a viscoelastic matrix, observations and modelling	297-312
Pakdel, Hamed / Mohammadi, Bijan	Progressive matrix cracking master curves of mid and outer off-axis plies in CFRP laminates	497-502
Sutherland, L. S.	A review of impact testing on marine composite materials: Part I – Marine impacts on marine composites	197-208
Sutherland, L. S.	A review of impact testing on marine composite materials: Part II – Impact event and material parameters	503-511
Sutherland, L. S.	A review of impact testing on marine composite materials: Part III - Damage tolerance and durability	512-518
Yu, Hang / Zhou, Chuwei	Sandwich diffusion model for moisture absorption of flax/glass fiber reinforced hybrid composite	1-6
Momeni, S. A. / Asghari, M.	The second strain gradient functionally graded beam formulation	15-24
Morgado, T. / Silvestre, N. / Correia, J. R.	Simulation of fire resistance behaviour of pultruded GFRP beams – Part II: Stress analysis and failure criteria	519-530
Arteiro, A. / Catalanotti, G. / Xavier, J. / Linde, P. / Camanho, P. P.	A strategy to improve the structural performance of non-crimp fabric thin-ply laminates	438-449
Lin, Huagang / Cao, Dengqing / Shao, Chonghui / Xu, Yuqian	Studies for aeroelastic characteristics and nonlinear response of FG-CNT reinforced composite panel considering the transient heat conduction	470-482
Wei, Kai / Peng, Yong / Wang, Kaiyu / Duan, Shengyu / Yang, Xujing / Wen, Weibin	Three dimensional lightweight lattice structures with large positive, zero and negative thermal expansion	287-296
Xu, Weixing / Zhang, Liangchi	Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites	257-265
Venkatachari, Anand / Natarajan, Sundararajan / Ganapathi, Manickam	Variable stiffness laminated composite shells – Free vibration characteristics based on higher-order structural theory	407-414
Ou, Xiang / Zhang, Xiaoqing / Zhang, Run / Yao, Xiaohu / Han, Qiang	Weak form quadrature element analysis on nonlinear bifurcation and post-buckling of cylindrical composite laminates	266-277
Na, Wonjin / Kwon, Dongil / Yu, Woong-Ryeol	X-ray computed tomography observation of multiple fiber fracture in unidirectional CFRP under tensile loading	39-47

About this
data sheet
IssueID
37800
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - March 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - March 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.