Composite Structures - July 2019

Published:	July 2019

Articles in this Issue

Author(s)	Title	Page(s)
Zhong, Haibin / Gu, Yinghong / Bao, Bin / Wang, Quan / Wu, Jiuhui	' 2D underwater acoustic metamaterials incorporating a combination of particle-filled polyurethane and spiral-based local resonance mechanisms	1-10
Tapullima, Jonathan / Hwan Kim, Cheol / Choi, Jin Ho	Analysis and experiment on DCB specimen using I-fiber stitching process	521-528
Colombi, Pierluigi / D'Antino, Tommaso	Analytical assessment of the stress-transfer mechanism in FRCM composites	961-970
Bednarik, M. / Cervenka, M. / Lotton, P. / Simon, L.	Analytical solutions for elastic SH-waves propagating through an isotropic inhomogeneous layer	875-887
Ghannadpour, S. A. M. / Karimi, M. / Tornabene, F.	Application of plate decomposition technique in nonlinear and post-buckling analysis of functionally graded plates containing crack	158-167
Mohamedou, Mohamed / Zulueta, Kepa / Chung, Chi Nghia / Rappel, Hussein / Beex, Lars / Adam, Laurent / Arriaga, Aitor / Major, Zoltán / Wu, Ling / Noels, Ludovic	Bayesian identification of Mean-Field Homogenization model parameters and uncertain matrix behavior in non-aligned short fiber composites	64-80
Fallah Pour, Ali / Gholampour, Aliakbar / Zheng, Junai / Ozbakkaloglu, Togay	Behavior of FRP-confined high-strength concrete under eccentric compression: Tests on concrete-filled FRP tube columns	261-272
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David / Zhao, Xiao-Ling	Behaviour of CFRP strengthened CHS members under monotonic and cyclic loading	592-601
Li, Mingjing / Füssl, Josef / Lukačević, Markus / Martin, Christopher M. / Eberhardsteiner, Josef	Bending strength predictions of cross-laminated timber plates subjected to concentrated loading using 3D finite-element-based limit analysis approaches	912-925
Li, Anbang / Xu, Shanhua / Wang, Hao / Zhang, Huifeng / Wang, Yan	Bond behaviour between CFRP plates and corroded steel plates	221-235
Magnucki, Krzysztof / Witkowski, Dawid / Magnucka-Blandzi, Ewa	Buckling and free vibrations of rectangular plates with symmetrically varying mechanical properties – Analytical and FEM studies	355-361
Laurenzi, Susanna / Rufo, Damiano / Sabatini, Marco / Gasbarri, Paolo / Palmerini, Giovanni B.	Characterization of deployable ultrathin composite boom for microsatellites excited by attitude maneuvers	502-509
Lim, Teik-Cheng	A composite metamaterial with sign switchable elastic and hygrothermal properties induced by stress direction and environmental change reversals	185-193
Yan, Xiaolei / Xu, Qiwang / Huang, Dengfeng / Zhong, Yong / Huang, Xiaodong	Concurrent topology design of structures and materials with optimal material orientation	473-480
Alsaadi, A. / Meredith, J. / Swait, T. / Curiel-Sosa, J. L. / Hayes, S.	Damage detection and location in woven fabric CFRP laminate panels	168-178
Wagner, H. N. R. / Köke, H. / Dähne, S. / Niemann, S. / Hühne, C. / Khakimova, R.	Decision tree-based machine learning to optimize the laminate stacking of composite cylinders for maximum buckling load and minimum imperfection sensitivity	45-63
Baek, So-Jung / Kim, Man-Sung / An, Woo-Jin / Choi, Jin-Ho	Defect detection of composite adhesive joints using electrical resistance method	179-184
Cheng, Liangyu / Ji, Chong / Gao, Fuyin / Yu, Yang / Long, Yuan / Zhou, You	Deformation and damage of liquid-filled cylindrical shell composite structures subjected to repeated explosion loads: Experimental and numerical study	386-401
Yi, Zhang / Si-yuan, He / Jia-gui, Liu / Wei, Zhao / Xiao-lu, Gong / Jin, Yu	Density gradient tailoring of aluminum foam-filled tube	451-459
Kappel, Erik	Distortions of composite aerospace frames due to processing, thermal loads and trimming operations and an assessment from an assembly perspective	338-346
Jiao, Peng / Chen, Zhiping / Li, You / Ma, He / Wu, Jihang	Dynamic buckling analyses of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) cylindrical shell under axial power-law time-varying displacement load	784-797
Papa, I. / Langella, A. / Lopresto, V.	Dynamic performances of basalt fibre laminates at room and low temperatures	652-661
Gaff, Milan / Kačík, František / Sandberg, Dick / Babiak, Marian / Turčani, Marek / Niemz, Peter / Hanzlík, Peter	The effect of chemical changes during thermal modification of European oak and Norway spruce on elasticity properties	529-538
Wang, Bing / Fang, Guodong / Liu, Shuo / Liang, Jun	Effect of heterogeneous interphase on the mechanical properties of unidirectional fiber composites studied by FFT-based method	642-651
Liu, Yuanqing / Wang, Wenzhong / Zhao, Ziqiang / Zhang, Haibo	The effect of meso-structure and surface topography on the indentation variability of viscoelastic composite materials	81-92
Su, Youliang	Effect of the cutting speed on the cutting mechanism in machining CFRP	662-676
Szeląg, Maciej	Evaluation of cracking patterns of cement paste containing polypropylene fibers	402-411
Martins, David / Proença, Miguel / Almeida Gonilha, José / Figueiredo Sá, Mário / Ramôa Correia, Joao / Silvestre, Nuno	Experimental and numerical analysis of GFRP frame structures. Part 1: Cyclic behaviour at the connection level	304-317
Martins, David / Figueiredo Sá, Mário / Almeida Gonilha, José / Ramôa Correia, Joao / Silvestre, Nuno / Ferreira, João Gomes	Experimental and numerical analysis of GFRP frame structures. Part 2: Monotonic and cyclic sway behaviour of plane frames	194-208
Lindgaard, Esben / Bak, Brian Lau Verndal	Experimental characterization of delamination in off-axis GFRP laminates during mode I loading	953-960
Susainathan, John / Eyma, Florent / De Luycker, Emmanuel / Cantarel, Arthur / Bouvet, Christophe / Castanié, Bruno	Experimental investigation of compression and compression after impact of wood-based sandwich structures	236-249
Xuan, Jia-qian / Li, Dian-sen / Jiang, Lei	Fabrication, properties and failure of 3D stitched carbon/epoxy composites with no stitching fibers damage	602-607
Qin, Zhaoye / Pang, Xuejia / Safaei, Babak / Chu, Fulei	Free vibration analysis of rotating functionally graded CNT reinforced composite cylindrical shells with arbitrary boundary conditions	847-860
Thai, Chien H. / Ferreira, A. J. M. / Tran, T. D. / Phung-Van, P.	Free vibration, buckling and bending analyses of multilayer functionally graded graphene nanoplatelets reinforced composite plates using the NURBS formulation	749-759
Fomin, Aleksandr	Functionally graded zirconium oxide coatings produced on zirconium using induction heat treatment	318-323
Heydari Mofrad, Mohsen / Mostofinejad, Davood / Hosseini, Ardalan	A generic non-linear bond-slip model for CFRP composites bonded to concrete substrate using EBR and EBROG techniques	31-44
Barbu, Lucia G. / Oller, Sergio / Martinez, Xavier / Barbat, Alex H.	High-cycle fatigue constitutive model and a load-advance strategy for the analysis of unidirectional fiber reinforced composites subjected to longitudinal loads	622-641
Rice, Clark / Tan, K. T.	Horse hoof inspired biomimetic structure for improved damage tolerance and crack diversion	362-370
Lee, Geunsung / Sung, Minchang / Youk, Ji Ho / Lee, Jinyong / Yu, Woong-Ryeol	Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites	580-591
Hui, Chan / Wang, Peng / Legrand, Xavier	Improvement of tufting mechanism during the advanced 3-dimensional tufted composites manufacturing: To the optimisation of tufting threads degradation	423-430
Nitschke, Christian / Vincenti, Angela / Chassaing, Jean-Camille	Influence of stochastic perturbations of composite laminate layups on the aeroelastic flutter of a cantilevered plate wing	809-826
Park, Hyunbum	Investigation on low velocity impact behavior of sandwich composite and monolithic laminate plates using FEM analysis	842-846
Shafei, Erfan / Faroughi, Shirko / Rabczuk, Timon	Isogeometric HSDT approach for dynamic stability analysis of general anisotropic composite plates	926-939
Babaei, Hadi / Kiani, Yaser / Reza Eslami, M.	Large amplitude free vibrations of long FGM cylindrical panels on nonlinear elastic foundation based on physical neutral surface	888-898
Pathirana, Sachinthani / Qiao, Pizhong	Local buckling analysis of periodic sinusoidal corrugated composite panels under uniaxial compression	148-157
Carrillo, J. G. / Gonzalez-Canche, N. G. / Flores-Johnson, E. A. / Cortes, P.	Low velocity impact response of fibre metal laminates based on aramid fibre reinforced polypropylene	708-716
Wang, Jun / Li, Jing / GangaRao, Hota / Liang, Ruifeng / Chen, Jiye	Low-velocity impact responses and CAI properties of synthetic foam sandwiches	412-422
Rimkus, Arvydas / Barros, Joaquim A. O. / Gribniak, Viktor / Rezazadeh, Mohammadali	Mechanical behavior of concrete prisms reinforced with steel and GFRP bar systems	273-288
Hassoon, O. H. / Tarfaoui, M. / El Moumen, A. / Qureshi, Y. / Benyahia, H. / Nachtane, M.	Mechanical performance evaluation of sandwich panels exposed to slamming impacts: Comparison between experimental and SPH results	776-783
Lohr, Christoph / Beck, Björn / Henning, Frank / Weidenmann, Kay André / Elsner, Peter	Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding	371-385
Varandas, L. F. / Arteiro, A. / Catalanotti, G. / Falzon, B. G.	Micromechanical analysis of interlaminar crack propagation between angled plies in mode I tests	827-841
Sasikumar, A. / Trias, D. / Costa, J. / Singery, V. / Linde, P.	Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies	93-104
Espadas-Escalante, J. J. / Bednarcyk, Brett A. / Pineda, Evan J. / Isaksson, P.	Modeling the influence of layer shifting on the properties and nonlinear response of woven composites subject to continuum damage	539-549
Yang, Jishi / Sun, Dongyang / Hu, Ning / Ning, Huiming / Zhang, Jianyu / Ye, Wei / Wu, Jian	Multi-objective robust design optimization of a two-dimensional tri-axial braided hollow pillar using an evolutionary algorithm	105-113
Han, Xinxing / Xu, Chenghai / Xie, Weihua / Meng, Songhe	Multiscale computational homogenization of woven composites from microscale to mesoscale using data-driven self-consistent clustering analysis	760-768
Santhapuram, Raghuram R. / Muller, Scott E. / Nair, Arun K.	Nanoscale bending properties of bio-inspired Ni-graphene nanocomposites	798-808
Jalaei, M. H. / Civalek, Ö.	A nonlocal strain gradient refined plate theory for dynamic instability of embedded graphene sheet including thermal effects	209-220
Gagani, Abedin I. / Krauklis, Andrey E. / Sæter, Erik / Vedvik, Nils Petter / Echtermeyer, Andreas T.	A novel method for testing and determining ILSS for marine and offshore composites	431-440
Shao, Ruizhe / Wu, Chengqing / Su, Yu / Liu, Zhongxian / Liu, Jian / Xu, Shenchun	Numerical analysis on impact response of ultra-high strength concrete protected with composite materials against steel ogive-nosed projectile penetration	861-874
Liu, Jiefu / Chen, Wensu / Hao, Hong / Wang, Zhonggang	Numerical study of low-speed impact response of sandwich panel with tube filled honeycomb core	736-748
Dadej, Konrad / Bienias, Jaroslaw / Surowska, Barbara	On the effect of glass and carbon fiber hybridization in fiber metal laminates: Analytical, numerical and experimental investigation	250-260
Quintanas-Corominas, A. / Reinoso, J. / Casoni, E. / Turon, A. / Mayugo, J. A.	A phase field approach to simulate intralaminar and translaminar fracture in long fiber composite materials	899-911
Sobhy, Mohammed / Zenkour, Ashraf M.	Porosity and inhomogeneity effects on the buckling and vibration of double-FGM nanoplates via a quasi-3D refined theory	289-303
Kim, Dug-Joong / Yu, Myeong-Hyeon / Lim, Jaeyoung / Nam, Byeunggun / Kim, Hak-Sung	Prediction of the mechanical behavior of fiber-reinforced composite structure considering its shear angle distribution generated during thermo-compression molding process	441-450
Chen, Qiang / Wang, Guannan	PSO-driven micromechanical identification of in-situ properties of fiber-reinforced composites	608-621
Liu, Wen / Yu, Ying / Hu, Xiaozhi / Han, Xiangyu / Xie, Peng	Quasi-brittle fracture criterion of bamboo-based fiber composites in transverse direction based on boundary effect model	347-354
Ren, Rui / Zhong, Jianlin / Le, Guigao / Ma, Dawei	Research on intralaminar load reversal damage modeling for predicting composite laminates’ low velocity impact responses	481-493
Sorrentino, Luca / Anamateros, Emmanouel / Bellini, Costanzo / Carrino, Luigi / Corcione, Giuseppe / Leone, Antonio / Paris, Gianluca	Robotic filament winding: An innovative technology to manufacture complex shape structural parts	699-707
Yang, Zhiqiang / Sun, Yi / Liu, Yizhi / Ma, Qiang	A second-order multiscale approach for viscoelastic analysis of statistically inhomogeneous materials	550-565
Zhang, J. / Oueslati, A. / Shen, W. Q. / de Saxce, G.	Shakedown of porous material with Drucker-Prager dilatant matrix under general cyclic loadings	566-579
Goode, T. / Shoemaker, G. / Schultz, S. / Peters, K. / Pankow, M.	Soft body armor time-dependent back face deformation (BFD) with ballistics gel backing	687-698
Wang, Dong-Wei / Ma, Li / Wang, Xin-Tao / Wen, Zhi-Hui / Glorieux, Christ	Sound transmission loss of laminated composite sandwich structures with pyramidal truss cores	19-30
Abdelkerim, Diana S. E. / Wang, Xin / Ibrahim, Haitham A. / Wu, Zhishen	Static and fatigue behavior of pultruded FRP multi-bolted joints with basalt FRP and hybrid steel-FRP bolts	324-337
Muflikhun, Muhammad Akhsin / Yokozeki, Tomohiro / Aoki, Takahira	The strain performance of thin CFRP-SPCC hybrid laminates for automobile structures	11-18
Huang, Bo-Tao / Li, Qing-hua / Xu, Shi-lang / Zhou, Bin	Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility	940-952
Yan, Xiaoye / Reiner, Johannes / Bacca, Mattia / Altintas, Yusuf / Vaziri, Reza	A study of energy dissipating mechanisms in orthogonal cutting of UD-CFRP composites	460-472
Qiao, Yao / Salviato, Marco	Study of the fracturing behavior of thermoset polymer nanocomposites via cohesive zone modeling	127-147
Zheng, Xiru / Park, Chan Woo	Thermal and mechanical properties of carbon fiber-reinforced resin composites with copper/boron nitride coating	494-501
Kim, Youngsoo / Jeong, Heeyeong / Gu, Grace X. / Ryu, Seunghwa	A three-dimensional fracture pattern diagram of staggered platelet structures	769-775
Gherlone, Marco	Tria and quad plate finite elements based on RZT(m) for the analysis of multilayered sandwich structures	510-520
Zhang, Kai / Su, Yuchao / Zhao, Pengcheng / Deng, Zichen	Tunable wave propagation in octa-chiral lattices with local resonators	114-126
Qin, Bin / Choe, Kwangnam / Wang, Tiantian / Wang, Qingshan	A unified Jacobi-Ritz formulation for vibration analysis of the stepped coupled structures of doubly-curved shell	717-735
Galos, Joel / Khatibi, Akbar Afaghi / Mouritz, Adrian P.	Vibration and acoustic properties of composites with embedded lithium-ion polymer batteries	677-686

About this
data sheet
IssueID
37768
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - July 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - July 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.