Composite Structures - December 2020

Published:	December 2020

Articles in this Issue

Author(s)	Title	Page(s)
Rafiee, Roham / Ghorbanhosseini, Amin	' Analyzing the long-term creep behavior of composite pipes: Developing an alternative scenario of short-term multi-stage loading test	112868
Ding, Tao / Xiao, Jianzhuang / Zou, Shuai / Zhou, Xinji	Anisotropic behavior in bending of 3D printed concrete reinforced with fibers	112808
Mukhopadhyay, Supratik / Hallett, Stephen R.	An augmented cohesive element for coarse meshes in delamination analysis of composites	112890
Liu, Houchang / Chen, Liming / Cao, Jinjun / Chen, Liliang / Du, Bing / Guo, Yongguang / Li, Weiguo / Fang, Daining	Axial compression deformability and energy absorption of hierarchical thermoplastic composite honeycomb graded structures	112851
Tang, Zexun / Zhou, Yinzhi / Feng, Jiang / Wang, Peng / Liu, Yang / Zhou, Jiannan / He, Huguang / Li, Sensen / Wang, He / Chen, Xiaoshuo / Qiu, Zhenyu / Jin, Fengnian / Fan, Hualin	Blast responses and damage evaluation of concrete protective arches reinforced with BFRP bars	112864
Madenci, Emrah / Özkılıç, Yasin Onuralp / Gemi, Lokman	Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations	112806
He, Wentao / Wang, Changzi / Wang, Shuqing / Yao, Lu / Cui, Linfeng / Xie, De	Characterizing and predicting the tensile mechanical behavior and failure mechanisms of notched FMLs—Combined with DIC and numerical techniques	112893
Rondina, Francesco / Donati, Lorenzo	Comparison and validation of computational methods for the prediction of the compressive crush energy absorption of CFRP structures	112848
Rufai, Olubukola / Chandarana, Neha / Gautam, Mayank / Potluri, Prasad / Gresil, Matthieu	Cure monitoring and structural health monitoring of composites using micro-braided distributed optical fibre	112861
Kim, Yongha / Kim, Sun Je	Design and thermo-structural analysis of 2D exhaust nozzle with multiple composite layers	112857
Van Hien, Dinh / Ngoc Thanh, Tran / Tung Lam, Vu / Thi Thanh Van, Tran / Van Hao, Le	Design of planar wound composite vessel based on preventing slippage tendency of fibers	112854
Ozer, Mehmet Sait / Koruk, Hasan / Sanliturk, Kenan Y.	Development of an equivalent shell finite element for modelling damped multi-layered composite structures	112828
Zheng, Shi / Yifeng, Zhong / Xiao, Peng / Peng, Wang	Dimensional reduction analyzing the thermoelastic behavior of wind turbine blades based on the variational asymptotic multiscale method	112835
Chellapandian, M. / Mani, Atul / Prakash, S. Suriya	Effect of macro-synthetic structural fibers on the flexural behavior of concrete beams reinforced with different ratios of GFRP bars	112790
Castanié, Bruno / Achard, Victor / Chirol, Clément	Effect of milled notches on the strength of open hole, filled holes, single and double lap shear CFRP tension coupons	112872
Matveev, Mikhail Y. / Brown, Louise P. / Long, Andrew C.	Efficient meshing technique for textile composites unit cells of arbitrary complexity	112757
Zhong, Yucheng / Liu, Ping / Pei, Qingxiang / Sorkin, Viacheslav / Louis Commillus, Athanasius / Su, Zhoucheng / Guo, Tianfu / Thitsartarn, Warintorn / Lin, Tingting / He, Chaobin / Zhang, Yong-Wei	Elastic properties of injection molded short glass fiber reinforced thermoplastic composites	112850
He, Yongxi / Li, Yingguang / Ju, Kai / Wen, Youyi / Hao, Xiaozhong / Zhou, Jing / Liu, Shuting	Elastomeric microfluidic valve for active resin flow control within composite structure	112844
Cortez Flores, Ilsen Adriana / Fernández Gómez, Jaime / Villanueva Llauradó, Paula / Ferreira, António	An empirical model to estimate FRP anchored joint strength using spike anchors	112789
Carrera, E. / Petrolo, M. / Nagaraj, M. H. / Delicata, M.	Evaluation of the influence of voids on 3D representative volume elements of fiber-reinforced polymer composites using CUF micromechanics	112833
Wowk, D. / Reyno, T. / Yeung, R. / Marsden, C.	An experimental and numerical investigation of core damage size in honeycomb sandwich panels subject to low-velocity impact	112739
Lang, F. C. / Xing, Y. M. / Zhao, Y. R. / Zhu, J. / Hou, X. H. / Zhang, W. G.	Experimental determination of the interface residual stresses of carbon-fiber-reinforced polymers	112849
Meda, Alberto / Rinaldi, Zila / Spagnuolo, Simone	Experimental investigation on the behaviour of concrete ties reinforced with GFRP bars	112805
Almahmood, Hanady / Ashour, Ashraf / Sheehan, Therese	Flexural behaviour of hybrid steel-GFRP reinforced concrete continuous T-beams	112802
Hu, Huifeng / Yu, Tiantang / Van Lich, Le / Bui, Tinh Quoc	Functionally graded curved Timoshenko microbeams: A numerical study using IGA and modified couple stress theory	112841
Kölbl, Michael / Sakovsky, Maria / Ermanni, Paolo	A highly anisotropic morphing skin unit cell with variable stiffness ligaments	112801
Nguyen, Ngoc-Duong / Vo, Thuc P. / Nguyen, Trung-Kien	An improved shear deformable theory for bending and buckling response of thin-walled FG sandwich I-beams resting on the elastic foundation	112823
Ren, Tao / Li, Fengming / Chen, Yanong / Liu, Chunchuan / Zhang, Chuanzeng	Improvement of the band-gap characteristics of active composite laminate metamaterial plates	112831
Yarali, Ebrahim / Ali Farajzadeh, Mohammad / Noroozi, Reza / Dabbagh, Ali / Khoshgoftar, Mohammad J. / Mirzaali, Mohammad J.	Magnetorheological elastomer composites: Modeling and dynamic finite element analysis	112881
Bharath, H. S. / Sawardekar, Akshay / Waddar, Sunil / Jeyaraj, P. / Doddamani, Mrityunjay	Mechanical behavior of 3D printed syntactic foam composites	112832
Li, Gen / Tan, Kang Hai / Fung, Tat Ching / Linz, Paolo Del	Mode I fracture characterisation of FRP-concrete interfaces under dynamic loading	112824
Wang, Qizhi / Lin, Huixing / Geng, Pei / Xu, Yunquan / Wu, Jianguo	Multi-scale damage mechanics method for predicting fatigue life of plain-braided C/SiC composites	112860
Zuo, Hao / Chen, Yixin / Jia, Feng	A new C0 layerwise wavelet finite element formulation for the static and free vibration analysis of composite plates	112852
Wang, Xing-er / Yang, Jian / Chong, Wai Tung A. / Qiao, Pizhong / Peng, Shennan / Huang, Xuhao	Post-fracture performance of laminated glass panels under consecutive hard body impacts	112777
Kazi, Monzure-Khoda / Eljack, Fadwa / Mahdi, E.	Predictive ANN models for varying filler content for cotton fiber/PVC composites based on experimental load displacement curves	112885
Attukur Nandagopal, Rajaram / Chai, Gin Boay / Narasimalu, Srikanth	Probabilistic bending behaviour of a symmetric multi-directional composite laminate subjected to moisture induced material property asymmetry	112845
Logakannan, Krishna Prasath / Ramachandran, Velmurugan / Rengaswamy, Jayaganthan / Gao, Zhanyuan / Ruan, Dong	Quasi-static and dynamic compression behaviors of a novel auxetic structure	112853
Wang, Zhihua / Almeida Jr., José Humberto S. / St-Pierre, Luc / Wang, Zhonglai / Castro, Saullo G. P.	Reliability-based buckling optimization with an accelerated Kriging metamodel for filament-wound variable angle tow composite cylinders	112821
Li, Huaguan / Wang, Hao / Alderliesten, René / Xiang, Junxian / Lin, Yanyan / Xu, Yingmei / Zhao, Haidan / Tao, Jie	The residual stress characteristics and mechanical behavior of shot peened fiber metal laminates based on the aluminium-lithium alloy	112858
Zhou, Yi / Huang, Zheng-Ming	Shear deformation of a composite until failure with a debonded interface	112797
Rad, E. Sadeghi / Saidi, A. R. / Rezaei, A. S. / Askari, M.	Shear deformation theories for elastic buckling of fluid-infiltrated porous plates: An analytical approach	112829
Yang, Weichao / Zhang, Xufeng / Yang, Kuijian / Pan, Bing / Fei, Binjun / Yi, Xiaosu / Chen, Yuli	Shear property characterization of aramid paper and its application to the prediction of honeycomb behaviors	112800
Jin, Liu / Chen, Huiming / Wang, Zuohu / Du, Xiuli	Size effect on axial compressive failure of CFRP-wrapped square concrete columns: Tests and simulations	112843
Godat, Ahmed / Hammad, Farah / Chaallal, Omar	State-of-the-art review of anchored FRP shear-strengthened RC beams: A study of influencing factors	112767
Fantuzzi, Nicholas / Bacciocchi, Michele / Agnelli, Jacopo / Benedetti, David	Three-phase homogenization procedure for woven fabric composites reinforced by carbon nanotubes in thermal environment	112840
Wang, Chen	Transverse crack evolution modeling of cross-ply laminates with a single layer of phantom node intraply elements for identically-oriented ply groups	112842
Civera, Marco / Boscato, Giosuè / Zanotti Fragonara, Luca	Treed gaussian process for manufacturing imperfection identification of pultruded GFRP thin-walled profile	112882
Gu, Huaiyuan / Shaw, Alexander D. / Amoozgar, Mohammadreza / Zhang, Jiaying / Wang, Chen / Friswell, Michael I.	Twist morphing of a composite rotor blade using a novel metamaterial	112855
de Lima, André S. / de Faria, Alfredo R.	A unified formulation for composite quasi-2D finite elements based on global-local superposition	112846
Eipakchi, Hamidreza / Mahboubi Nasrekani, Farid	Vibrational behavior of composite cylindrical shells with auxetic honeycombs core layer subjected to a moving pressure	112847
Hunt, Christopher J. / Zhao, Yian / Wisnom, Michael R. / Woods, Benjamin K. S.	WrapToR composite truss structures: Measurement and modelling of mechanical response	112834

About this
data sheet
IssueID
37731
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.