ce/papers - v. 5, n. 4 (September 2022)

Published:	September 2022

Articles in this Issue

Author(s)	Title	Page(s)
Walport, Fiona / Zhang, Ruizhi / Meng, Xin / Gardner, Leroy	The Annealing Effect of Welding on the Strength of Cold‐worked Stainless Steel	541-546
Somodi, Balázs / Bärnkopf, Erzsébet / Kövesdi, Balázs	Applicable Equivalent Bow Imperfections in GMNIA for Eurocode Buckling Curves – in Case of Box Sections	563-567
Kroyer, Robert / Vigneri, Valentino / Taras, Andreas	Application of Fibre Optical Sensors in Push‐out Tests on Composite Steel Truss and Concrete Beams	867-873
Shaheen, Mohamed / Presswood, Rebecca / Afshan, Sheida	Application of Machine Learning to Predict the Mechanical Properties of High Strength Steel at Elevated Temperature	420-428
Sarfarazi, Sina / Shamass, Rabee / Della Corte, Gaetano / Guarracino, Federico	Assessment of Design Approaches for Stainless‐Steel Joints Through an Equivalent FE Modelling Technique	271-281
Nogueira, Mateus M. / de Lima, Luciano R. O. / da S. Vellasco, Pedro C. G. / Young, Ben	Assessment of Stainless Steel Tubular T‐joints Under Chord Sidewall Failure Mode by a Semi‐analytical Formulation	574-583
Sequeira, Luiz Eduardo Fernandes / Goncalves, Paulo Batista / Roehl, Deane	Assessment of the Elastoplastic Nonlinear Static and Dynamic Behavior of Guyed Antenna Towers Subjected to Cable Rupture	755-763
Lázaro, Lucy / Chacón, Rolando	Austenitic Stainless Steel EBF Subjected to Low and Extremely Low Cycle Fatigue	693-700
Feber, Nina / Jandera, Michal / Rossi, Barbara	Austenitic Stainless Steel I‐section Beam‐column Tests and Numerical Modelling	547-554
Ramonell, Carlos / Chacón, Rolando / Krenn, Burkhard / Puig‐Polo, Càrol	Automated Pipeline for the Analysis of a Scale‐reduced Steel Cable Net	1060-1066
Nascimento, Sérgio / Santos, Rafael / Pedro, José Oliveira	Behaviour of Plate Girders with Intermediate Transverse Stiffeners – Experimental Investigation	675-684
Wang, Fangying / Zhao, Ou / Young, Ben	Behaviour of S960 Ultra‐high Strength Steel Press‐braked Channel Sections	584-591
Yamaguchi, Eiki / Nakashima, Daisuke / Amamoto, Takuya	Bending Behavior of Deformed Steel Bridge Girder	79-83
Saufnay, Loris / Tibolt, Mike / Jaspart, Jean‐Pierre / Demonceau, Jean‐François	The Beneficial Influence of the Roller‐straightening Process on the Bearing Capacity of Steel Columns	889-897
Li, Zheng / Pasternak, Hartmut / Geißler, Karsten	Buckling Analysis of Cylindrical Shells using Stochastic Finite Element Method with Random Geometric Imperfections	653-658
Maier, Nadine / Mensinger, Martin / Ndogmo, Joseph	Buckling Check with Consideration of an Eccentric Load Introduction during Launching	592-597
Pourostad, Vahid / Kuhlmann, Ulrike	Buckling Resistance of Longitudinally Stiffened Panels with Closed Stiffeners under Direct Longitudinal Stresses	330-339
Unterweger, Harald / Kettler, Markus / Zauchner, Paul	Calibrated Design Model for the Compression Capacity of Angle Members with Welded Joints Including Accurate Joint Stiffness	378-384
Masubara, Gustavo Yoshio / de Miranda Batista, Eduardo	CFS Columns Under Buckling Interaction: Direct Strength Method Generalised Approach	84-93
Manta, David / Gonçalves, Rodrigo / Camotim, Dinar	Combining Shell and GBT‐based Finite Elements – the Best of Both Worlds?	9-21
Lemes, Ígor J. M. / Lima, Pedro H. A. / Barros, Rafael C. / Silveira, Ricardo A. M. / Chiorean, Cosmin G.	A Complete Assessment of the Moment‐Curvature Relationship of Compressed Steel‐concrete Composite Cross‐sections	819-827
Gashi, Ferit / Bontempi, Franco / Petrini, Francesco	Component Test, Fracture Simulation and Experimental Study on Steel and Shear Panel for Seismic Resistance	708-713
Nonn, Jonas / Wilden, Vera / Feldmann, Markus	A Consistent Approach for Stability Verification of Steel Structures	1075-1083
Müller, Andreas / Taras, Andreas	Contribution to Lateral Torsional Buckling of Girders with Rotational Restraints	354-363
Piloto, Paulo A. G. / Khetata, Mohamed S. / Ramos‐Gavilán, Ana B.	Critical Temperature of Load Bearing LSF Walls Under Fire	490-499
Ma, Yang / Martinez‐Vazquez, Pedro / Baniotopoulos, Charalampos	The Curvature – Energy Relations in Buckling Analysis of Tubular Wind Turbine Towers	643-652
Gîrbacea, Ioan Andrei / Ungureanu, Viorel	Design Assisted by Finite Element of Z‐Purlins with Overlapping under Gravity Loading	117-124
da Silva, Luís Simões / Tankova, Trayana / Rodrigues, Filipe	Design Buckling Resistance of High Strength Steel Members	364-369
Murtaza, Hasan / Kucukler, Merih	Design of Steel Columns in Fire using Second‐order Inelastic Analysis with Strain Limits	484-489
Šorf, Marek / Jandera, Michal	Design Procedure for Stainless Steel Slender I Section Members in Bending	555-562
Jakovljević, Isidora / Spremic, Milan / Marković, Zlatko / Gluhović, Nina	Different Profiled Sheeting Configurations in Steel‐Concrete Composite Beams	795-799
Hulm, Felix / Kreutz, Johannes / Maier, Nadine / Mensinger, Martin / Ndogmo, Joseph	Dimensioning Aids for Stiffened and Unstiffened Plates According to Eurocode 3 Part 1‐5	635-642
Arrayago, Itsaso / Rasmussen, Kim J. R. / Zhang, Hao / Real, Esther	Direct Design of Stainless Steel Frames: Recommendations and Case Studies	506-514
Magisano, Domenico / Garcea, Giovanni	Direct Evaluation of the Sensitivity of the Nonlinear Critical Point to Geometrical Imperfections	94-99
Derler, Christoph / Unterweger, Harald	Distortion – Induced Fatigue Failure at Main Girders of a Railway Bridge – Strain Measurements in Service and Analyses Based on Fracture Mechanics	42-51
Filho, Elisson Bilheiro Ferreira / Landesmann, Alexandre / Camotim, Dinar	Distortional‐Global Interactive Failure and DSM Design of CFS Lipped Channel Columns at Elevated Temperatures	448-457
González‐de‐León, Isabel / Arrayago, Itsaso / Nastri, Elide / Real, Esther	Ductile Fracture Simulation of Stainless Steel Coupons Under Monotonic Tensile Forces	520-526
Silvestru, Vlad‐Alexandru / Ariza, Inés / Taras, Andreas	Ductility and Buckling Behaviour of Point‐by‐Point Wire Arc Additively Manufactured Steel Bars	226-234
Li, Guo‐Qiang / Lyu, Yi‐Fan / Wang, Yan‐Bo	Ductility and Strength of High‐strength Bolted Connections for High‐strength Constructional Steels	28-35
Fernandez‐Lacabe, David / Lopez, Claudio / Serna, Miguel Ángel	Elastic Lateral‐Torsional Buckling of Girders with Corrugated Web: Equivalent Section Properties Approach	344-353
Nakano, Tomoki / Ikarashi, Kikuo / Mitsui, Kazuya	Elastic Local Buckling Strength of Wide Flange Beams Web Subjected to End Moment and Distributed Load	941-947
Nedelcu, Mihai	An Elasto‐plastic Finite Element for the Analysis of Planar Steel Beams	974-979
Silvestru, Vlad‐Alexandru / Deng, Zhikang / Michels, Julien / Taras, Andreas	Enabling a Ductile Failure of Laminated Glass Beams with Iron‐Based Shape Memory Alloy (Fe‐SMA) Strips	948-956
de Salles, Guilherme / Taissum, Daniel / Batista, Eduardo	Energy‐based Equations for Local and Anti‐symmetric Distortional Modes of Lipped Channel Columns	161-169
Radwan, Mohammad / Kövesdi, Balázs	An Enhanced Design Approach for Global and Local Buckling Resistance of Welded Box Section Columns	898-905
Enders, Alexander / Kuhlmann, Ulrike	Experimental and Numerical Investigations on the Moment Capacity and Stability of Z‐shaped Steel Piles	300-308
Der, Batuhan / Wald, František	Experimental and Numerical Studies of Bolted Lap Joints at Elevated Temperature	204-209
Hegyi, Péter / Horváth, Lászlo / Dunai, László / Ghazi, Al‐Abedi Ahmed Mohammed	Experimental Investigation of Shear Effects in Ultra‐Lightweight Concrete Encased CFS Structural Members	143-150
Giuliani, Giulia / Andreotti, Roberto / Tondini, Nicola / Bonelli, Alessio	Experimental Investigation of Steel Frames Equipped with Dissipative Replaceable Links	714-719
Jörg, Fabian / Bours, Anna‐Lena / Winkler, Rebekka / Kuhlmann, Ulrike / Knobloch, Markus	Experimental Studies on the Influence of Different Support Conditions and Structural Systems for the Lateral Torsional Buckling Behaviour of Steel Structures	309-319
Koh, Hyeyoung / Rosson, Barry T. / Blum, Hannah B.	Exploring Machine Learning for the Stability Analysis of Rotary‐straightened Steel Members with Multiple Stiffness Reduction Models	980-989
Fitzalan, Jake / Mashiri, Fidelis	Finite Element Analysis of Telecommunication Structure Reinforcement	1084-1091
Bougoffa, Sabra / Mezghanni, Omar / Durif, Sébastien / Bouchaïr, Abdelhamid / Daoud, Atef	Full Length Transverse Stiffener Under Compression	967-973
Peres, Nuno / Gonçalves, Rodrigo / Camotim, Dinar	GBT‐based Stability Analysis of Thin‐walled Members with Circular Axis	906-913
Maia, Élio / Couto, Carlos / Real, Paulo Vila / Lopes, Nuno	The General Method for the Fire Design of I‐section Web‐tapered Members	467-475
Chacón, Rolando / Ramonell, Carlos / Puig‐Polo, Càrol / Mirambell, Enrique	Geometrical Digital Twinning of a Tapered, Horizontally Curved Composite Box Girder Bridge	52-58
Chiorean, Cosmin G.	A Global Convergent Method for Strength Capacity Evaluation of Composite Sections Subjected to Fire	476-483
Richter dos Santos, Elisângela Arêas / Almeida de Sousa, Felipe / da Silva, José Guilherme Santos	Human Comfort Assessment of Steel‐Concrete Composite Floors Subjected to People Dynamic Loads	771-777
Azizi, Esmaeil / Stranghöner, Natalie	Imperfection Sensitivity of Cylindrical Shells Under Shear Loading	685-692
Böhm, Manuela / Schaumann, Peter	Imperfection Sensitivity of Large Cylindrical Shells Under Vacuum Considering Different Geometric Ratios	659-666
Stroetmann, Richard / Fominow, Sergei	Imperfections for the LTB‐design of Members with I‐sections	290-299
Bodea, Florin Liviu / Both, Ioan / Czechowski, Leszek / Jankoswki, Jacek / Kotełko, Maria / Ungureanu, Viorel	The Influence of Eccentricity on the Behaviour of Thin‐Walled Cold‐Formed Steel Members with Open Cross‐Sections under Compression	186-193
Kettler, Markus / Unterweger, Harald	Influence of Longitudinal Stiffeners on the Local Stresses in Crane Runway Girders ‐ Experimental and Numerical Investigations	598-605
Studer, Patrick / Taras, Andreas	Influence of Strain‐hardening on the Bending Strength and Rotation Capacity of Welded I‐section Beams	933-940
Studer, Patrick / Taras, Andreas	Influence of Strain‐hardening on the Load‐carrying Behaviour of Bearing Type Bolted Connections	218-225
Vigneri, Valentino / Kroyer, Robert / Taras, Andreas	Influence of the Longitudinal Shear Transfer on the Vertical Shear Capacity in CSTC Beams	828-835
Possidente, Luca / Tondini, Nicola	Influence of the Shape of Initial Imperfections on Single Web and Flange Steel Plates at Elevated Temperatures	414-419
Segura, Guillermo / Arrayago, Itsaso / Mirambell, Enrique	Influence of Welded Joints Modelling on the Structural Response of Steel Frames under Fire Situation	439-447
Kraus, Matthias / Chowdhury, Sharmistha / Wudtke, Idna	Intelligent Steel Structures ‐ Model Updating Concepts for Innovative Design Strategies	1-9
Wang, Jian / Li, Zheng / Robra, Jörgen / Pasternak, Hartmut / Euler, Mathias	Investigation on Shear Buckling of Corrugated Web Beams with Reinforced Web Openings	628-634
Németh, Gábor / Kovács, Nauzika	Investigation the Ductility of Corrugated Embedded Shear Connectors Through Push‐out Tests	36-41
Ungermann, Dieter / Schweyher, Janik	Investigations on the Shear Capacity of Stainless Steel for its Use in Steel and Composite Bridge Construction	67-72
Röß, Rudolf / Schäfers, Michael / Mensinger, Martin / Ameri, Shaghayegh / Zehfuß, Jochen	Large Scale Buckling Tests of Bar Bundle Columns	537-540
Ziemian, Constance / Ziemian, Ronald	Lateral Bracing Stiffness Requirements for Systems of Parallel Compression Members	1052-1059
Vaszilievits‐Sömjén, Bálint	Local Buckling of Compressed Cold‐Formed Lipped Channels via Buckling Mode Shapes	178-185
Landolfo, Raffaele	Material Ductility and Buckling Behaviour of Eurocode‐compliant Cold‐formed Steel Hollow Columns	1-8
Tankova, Trayana / Zhu, Carlos / Branco, Ricardo	Material Properties for Wire‐and‐arc Additively Manufactured Steel	1092-1097
Jaspart, Jean‐Pierre / Corman, Adrien / Demonceau, Jean‐François	Mechanical Properties of the Component “Column Web in Compression” in Steel Beam‐to‐column Joints	242-250
Zhang, Ruizhi / Amraei, Mohsen / Piili, Heidi / Gardner, Leroy	Microstructure, Mechanical Properties and Cross‐sectional Behaviour of Additively Manufactured Stainless Steel Cylindrical Shells	568-573
Carvalho, Carlos / Prola, Luís	Moment Resistance Analysis of Thin‐walled Stiffened Sections by the Alternative Method of EN1993: Part:1‐3	135-142
Bezas, Marios‐Zois / Jaspart, Jean-Pierre / Vayas, Ioannis / Demonceau, Jean-François	New Consistent Set of Design Equations for Equal‐leg Angle Sections and Members	874-881
Moreira, Rodrigo Falcão / Castro, José Miguel / Varum, Humberto	A New Displacement‐based Design Procedure for the Retrofitting of RC Buildings with Steel Braces	729-737
Hicks, Stephen J. / Braun, Matthias / Marković, Zlatko / Way, James	New Eurocode 4 design rules for shallow floor construction	1-6
Ungermann, Dieter / Lemański, Tim / Brune, Bettina	A New Eurocode‐compliant Design Approach for Cold‐Formed Steel Sections	125-134
Betz, Kai Stephan / Schaumann, Peter / Kulikowski, Jan	New Test Bed for Corroded Large Size Bolted Connections Under Fatigue and Pretension	235-241
Liguori, Francesco S. / Magisano, Domenico / Leonetti, Leonardo / Madeo, Antonio / Garcea, Giovanni	Nonlinear Thermal Buckling Analysis of Thin‐walled Structures: Solid‐shell Discretization, Continuation Method and Reduction Technique	623-627
Schaper, Lukas / Tankova, Trayana / Knobloch, Markus / da Silva, Luís Simões	A Novel Residual Stress Model for Welded I‐sections and the Influence on the Stability Behaviour	370-377
Mefleh, Wajdi / Kovács, Nauzika	Numerical Analysis for Push‐Out Test with Y Type Perfobond Shear Connectors	800-808
Silva, Talita L. / Valente, Isabel B. / Barros, Joaquim A. O. / Silva, Jorge O.	Numerical Assessment of Steel and Concrete Composite Beams with Cold Formed Members	787-794
Pamplona, Gil / Vellasco, Pedro / Tenchini, Andre / Lima, Luciano / Rodrigues, Monique	Numerical Investigation of Doubler Plate Reinforced Tubular T‐joints under Chord Compression Loads	264-270
Curkovic, Ivan / Lukačević, Ivan / Žuvelek, Vlaho / Rajić, Andrea	Numerical Investigation of Shear Connection in Cold‐formed Steel‐concrete Composite Beam	847-856
Medall, David / Espinós, Ana / Albero, Vicente / Ibañez, Carmen / Romero, Manuel L.	Numerical Investigation on the Thermal Behaviour of Steel‐reinforced CFST Columns in Fire	429-438
Ghimire, Abhishek / Wald, František	Numerical Modelling for Resistance of Welds in Steel Structures from High‐Strength Steel	515-519
Ahmed, Aya / Hu, Tong / Walport, Fiona / Gardner, Leroy	Numerical Modelling of Single‐span Portal Frames	809-818
Kyvelou, Pinelopi / Buchanan, Craig / Gardner, Leroy	Numerical Modelling of the World's First Metal 3D Printed Bridge	59-66
Zogu, Pëllumb / Schäfer, Markus	Numerical Study of Non‐linear Buckling Analysis for Steel and Partial Concrete Encased Composite Columns	778-786
Ferreira Filho, José Osvaldo / Tankova, Trayana / Carvalho, Hermes / Rodrigues, Filipe / da Silva, Luís Simões	Numerical Study on the Buckling Resistance of High Strength Steel Columns and Beam‐columns	527-536
Müller, Andreas / Vild, Martin / Taras, Andreas	On the Choice of Eigenmode Shapes for Interactive Cases of Local and Global Buckling of RHS/SHS and I‐Shaped Sections	957-966
Couto, Carlos	On the Development of Artificial Neural Network Models of the Critical Moment of Tapered Beams	1027-1033
Gonçalves, Rodrigo / Ritto‐Corrêa, Manuel	On the Modelling of “Fork” Supports Using geometrically Exact Thin‐walled Beam Finite Elements	882-888
Moscoso, Caridad / Kraus, Matthias	On the Verification of Beams Subjected to Lateral Torsional Buckling by Simplified Plastic Structural Analysis	914-923
Quan, Chunyan / Walport, Fiona / Kucukler, Merih / Gardner, Leroy	Out‐of‐plane Stability Design by GMNIA – Equivalent Imperfections and Strain Limits	320-329
Lukačević, Ivan / Curkovic, Ivan / Rajić, Andrea / Žuvelek, Vlaho	Parametric Finite Element Analyses of Lightweight Cold‐formed Steel‐concrete Composite Floor Beams	836-846
Kövesdi, Balázs / Dunai, László	Patch Loading Resistance of Slender Plate Girders with Multiple Longitudinal Stiffeners	615-622
Pons, David / Lapuebla‐Ferri, Andrés / Romero, Manuel L.	Post‐fire Residual Strength and Ductility of Structural Steels from Hollow Sections	458-466
Hołowaty, Janusz / Wichtowski, Bernard	Properties of Structural Steels in Historical Railway Bridges by Diagnostic Tests	73-78
Baguinho, Filipa / Biscaya, André / Pedro, José Oliveira	The Reduced Stress Method with Stress Shedding for Designing S690 High Strength Steel Slender Plated Girders	667-674
Lebastard, Maxime / Couchaux, Maël / Bureau, Alain / Hjiaj, Mohammed	Residual Stresses in Welded I‐section Members with Flame‐cut Flanges	999-1007
Beyer, André / Delacourt, Guillaume / Bureau, Alain	Resistance of Closely Spaced Back‐to‐back Connected Equal Leg Angle Sections	1008-1016
Bureau, Alain / Snijder, Bert / Knobloch, Markus / Kuhlmann, Ulrike / Gardner, Leroy / Taras, Andreas / da Silva, Luís	Revision of EN 1993‐1‐1 – Design Rules for Member Buckling	385-393
Golea, Tudor / Santos, Ana Francisca / Jaspart, Jean‐Pierre / Latour, Massimo / Santiago, Aldina / Demonceau, Jean‐François	Robustness of Steel Frame Structures Equipped with FREEDAM Dissipative Joints	210-217
Snijder, Hubertus H. / Knipping, Jitske B. N. / Maljaars, Johan / Teeuwen, Paul A.	Safety Assessment for Capacity Design of Bolted Steel Connections in Tension	282-289
Müller, Andreas / Taras, Andreas / Kraus, Michael A.	Scientific Machine and Deep Learning Investigations of the Local Buckling Behaviour of Hollow Sections	1034-1042
Milone, Aldo / Tartaglia, Roberto / D'Aniello, Mario / Landolfo, Raffaele	Seismic Assessment and Strengthening of an Existing Non‐Conforming Multi‐Storey Steel Building	701-707
Knoedel, Peter / Gkatzogiannis, Stefanos / Holtschoppen, Britta / Ummenhofer, Thomas	Seismic Design of Elevated Silos and Tanks – a Study on Behaviour Factors	738-747
Giuliani, Giulia / Andreotti, Roberto / Tondini, Nicola / Bursi, Oreste S.	Seismic Fragility Curves of Steel Frames Equipped with Easily Repairable Dissipative Devices	720-728
Fahnestock, Larry	Seismic Stability from Low Ductility to Enhanced Resilience	22-27
Neves, Marcos / Basaglia, Cilmar / Camotim, Dinar	Shape Optimisation of Cold‐Formed Steel Cross‐Sections with Longitudinal Intermediate Stiffeners	100-109
Simão, Pedro Dias / Rodrigues, João Paulo C.	Simple Structural Models to Compute the Fire Resistance of Restrained Steel Columns using Energy Principles	394-404
Ludwig, Christian	Simplified Interaction Conditions and their Accuracy in Doubly Symmetrical I‐Sections	924-932
Eid, Nathalie / Joó, Attila László	Simplified Numerical Model Development of Lightweight‐concrete Encased Cold‐formed Steel Column‐end Joints and Panels	170-177
Schönfeld, Larissa / Naujoks, Bernd / Ludwig, Christian	Slenderness‐dependent Equivalent Imperfections in Plate Buckling	606-614
Jůza, Jan / Jandera, Michal	Stainless Steel Portal Frame Tests	500-505
Don, Rafaela / Balaskas, Georgios / Vulcu, Cristian / Hoffmeister, Benno	Steel and Composite Joints for MRFs in Moderate Seismicity: Experimental and Numerical Program	857-866
Vild, Martin / Bajer, Miroslav / Barnat, Jan / Holomek, Josef	Strengthening of Steel Beam by Inclined Stiffeners	258-263
de Miranda Batista, Eduardo / Lazzari, João Alfredo de / Matsubara, Gustavo Yoshio / Pfeil, Michèle	Structural Dynamic and Buckling Behaviour of Steel Cold‐formed Polygonal Conic Pole for Antennas Support	151-160
Kucukler, Merih / Gardner, Leroy	Structural Response and Design of Austenitic Stainless Steel I‐section Beam‐columns Undergoing Flexural‐Torsional Buckling	340-343
Guo, Xi / Kyvelou, Pinelopi / Ye, Jun / Teh, Lip H. / Gardner, Leroy	Structural Response of Wire Arc Additively Manufactured Steel Bolted Connections under Single Shear	251-257
Schaper, Lukas / Knobloch, Markus	Structural Stability Verification for Steel Beam‐columns in Fire ‐ a Consistent Approach with Ambient Temperature Rules	405-413
Couto, Carlos / Oliveira, Diogo / Real, Paulo Vila	A Study on the Capacity of Steel Portal Frames using Shell Finite Elements	1017-1026
Nkole Kabongo, Aris Mpemba / Jaspart, Jean‐Pierre / Demonceau, Jean‐François	Technical Study of Kongo‐Central Colonial Steel Houses Belonging to the DRC Patrimony	1067-1074
Massoud, Mohamed / Hanna, Maged / Elagroudi, Ahmed / Magdy, Ahmed / Samy, Ayman	Tensile Capacities of Standing Seam Cladding‐Purlin Clip Connection	110-116
Martins, João Pedro / da Silva, Luís Simões / Cardoso, Hermano	Ultimate Resistance of Diagonally Stiffened Thin Steel Webs in I‐girders	1045-1051
Mohabeddine, Anis I. / Eshaghi, Cyrus / de Barros, Rui Carneiro / Correia, José A. F. O. / Castro, José M.	Variability in the Nonlinear Modelling Parameters of Steel I‐shaped Beams Subjected to Cyclic Loading Considering Manufacturing Tolerances	748-754
de Deus, Leandro de Andrade / de Souza Bastos, Leonardo / da Silva, José Guilherme Santos	Vibration Analysis and Human Comfort Assessment of Building Subjected to Wind Dynamic Load s	764-770
Timmers, Ralph / Lang, Robert	Yield‐line Mechanisms of Endplate Connections with Eight Bolts and Circular Bolt Configurations Using DLO	194-203

About this
data sheet
IssueID
66546
Published on:
23/09/2022
Last updated on:
23/09/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

ce/papers - v. 5, n. 4 (September 2022)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

ce/papers - v. 5, n. 4 (September 2022)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.