Building Simulation - v. 14, n. 4 (February 2021)

Published:	February 2021

Articles in this Issue

Author(s)	Title	Page(s)
Anwar, Muhammad Wasim / Ali, Zaib / Javed, Abdullah / Din, Emad Ud / Sajid, Muhammad	Analysis of the effect of passive measures on the energy consumption and zero-energy prospects of residential buildings in Pakistan	1325-1342
Na, Ri / Shen, Zhigang	Assessing cooling energy reduction potentials by retrofitting traditional cavity walls into passively ventilated cavity walls	1295-1309
Casseer, Dilshan Ramesh / Ranasinghe, Chathura	An assessment on the test setups used for energy labeling of ceiling fans	1175-1188
Yu, Longxing / Wan, Huaxian / Ji, Jie	Asymmetric flow effect in a horizontal natural ventilated tunnel with different aspect ratios under the influence of longitudinal fire locations	1311-1323
Lastovets, Natalia / Kosonen, Risto / Jokisalo, Juha	The comparison of design airflow rates with dynamic and steady-state displacement models in varied dynamic conditions	1201-1219
Sun, Shaobo / Chen, Huanxin	Data-driven sensitivity analysis and electricity consumption prediction for water source heat pump system using limited information	1005-1016
Tse, K. T. / Hu, Gang / Song, Jie / Seon Park, Hyo / Kim, Bubryur	Effects of corner modifications on wind loads and local pressures on walls of tall buildings	1109-1126
Saraei, Armin / Moujaes, Samir Farid	The effects of exhaust air vent location on thermal comfort inside a residential building equipped with an evaporative cooling system	1063-1075
Sanyal, Prasenjit / Dalui, Sujit Kumar	Effects of side ratio for ‘Y’ plan shaped tall building under wind load	1221-1236
Yu, Taofang / Chen, Hongzhong / Li, Ziwei / He, Qiushi / Lin, Borong	An efficient method of evaluating large scale urban residential skylight environment and an empirical study of Beijing main area	871-883
Jumabekova, Ainagul / Berger, Julien / Foucquier, Aurélie	An efficient sensitivity analysis for energy performance of building envelope: A continuous derivative based approach	909-930
Meng, Qinglong / Xi, Yuan / Zhang, Xingxing / Mourshed, Monjur / Hui, Yue	Evaluating multiple parameters dependency of base temperature for heating degree-days in building energy prediction	969-985
Vigne, Gabriele / Węgrzyński, Wojciech / Cantizano, Alexis / Ayala, Pablo / Rein, Guillermo / Gutiérrez-Montes, Cándido	Experimental and computational study of smoke dynamics from multiple fire sources inside a large-volume building	1147-1161
Massarotti, Nicola / Mauro, Alessandro / Mohamed, Salahudeen / Nowak, Andrzej J. / Sainas, Domenico	Fluid dynamic and thermal comfort analysis in an actual operating room with unidirectional airflow system	1127-1146
Chellaswamy, C. / Ganesh Babu, R. / Vanathi, A.	A framework for building energy management system with residence mounted photovoltaic	1031-1046
Estrella Guillén, Esteban / Samuelson, Holly W. / Vohringer, Christine	The impact of cultural assumptions on simulated energy, comfort, and investment returns of design decisions in two desert climates	931-944
Lei, Lei / Zheng, Hao / Wu, Bing / Xue, Yu	Inverse determination of multiple heat sources’ release history in indoor environments	1263-1275
Hou, Yaohua / Chen, Chao / Zhou, Yu / Yang, Zhixiang / Wei, Shen	Investigation of natural ventilation performance of large space circular coal storage dome	1077-1093
Dai, Ho Kam / Huang, Wenjie / Fu, Liye / Lin, Chao-Hsin / Wei, Daniel / Dong, ZhongZhe / You, Ruoyu / Chen, Chun	Investigation of pressure drop in flexible ventilation ducts under different compression ratios and bending angles	1251-1261
Huang, Lei / Micolier, Alice / Gavin, Henri P. / Jolliet, Olivier	Modeling chemical releases from building materials: The search for extended validity domain and parsimony	1277-1293
Zhu, Xu / Shi, Taotao / Jin, Xinqiao / Du, Zhimin	Multi-sensor information fusion based control for VAV systems using thermal comfort constraints	1047-1062
Yin, Haiguo / Li, Linna / Wu, Rui / Wang, Yuanyuan / Li, Angui	A numerical study on the effect of column layout on air distribution and performance of column attachment ventilation	1095-1108
Song, Jinwei / Qian, Hua / Zhao, Dongliang / Jiang, Weixue / Zheng, Xiaohong	Particulate matter emission by an isolated rotating wheel	1163-1173
Dong, Bing / Widjaja, Reisa / Wu, Wenbo / Zhou, Zhi	Review of onsite temperature and solar forecasting models to enable better building design and operations	885-907
Ouf, Mohamed M. / Park, June Young / Burak Gunay, H.	A simulation-based method to investigate occupant-centric controls	1017-1030
Dogan, Timur / Kastner, Patrick	Streamlined CFD simulation framework to generate wind-pressure coefficients on building facades for airflow network simulations	1189-1200
Wang, Ran / Lu, Shilei / Feng, Wei / Xu, Bowen	Tradeoff between heating energy demand in winter and indoor overheating risk in summer constrained by building standards	987-1003
Gao, Ran / Guo, Wei / Yang, Changqing / Wang, Meng / Zhang, Sikai / Zhou, Hang / Li, Angui	Truncation method for calculating the resistance of ventilation air-conditioning duct systems under nonfully developed flow boundary conditions	1237-1249
Brunetti, Gian Luca	Utilization of irradiance ratios for calculating the effect of reflections from obstructions in building energy simulation	945-967

About this
data sheet
IssueID
58384
Published on:
03/05/2021
Last updated on:
03/05/2021

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Building Simulation - v. 14, n. 4 (February 2021)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Building Simulation - v. 14, n. 4 (February 2021)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.