Building and Environment - v. 42, n. 1 (January 2007)

Published:	January 2007

Articles in this Issue

Author(s)	Title	Page(s)
Ha, Tae-Hyun / Muralidharan, Srinivasan / Bae, Jeong-Hyo / Ha, Yoon-Cheol / Lee, Hyun-Goo / Park, Kyung-Wha / Kim, Dae-Kyeong	' Accelerated short-term techniques to evaluate the corrosion performance of steel in fly ash blended concrete	78-85
Chang, Kuei-Feng / Chiang, Che-ming / Chou, Po-Cheng	Adapting aspects of GBTool 2005—searching for suitability in Taiwan	310-316
Cheng, Eddie W. L. / Li, Heng	Application of ANP in process models: An example of strategic partnering	278-287
Seco, Andrés / Tirapu, Fermín / Ramírez, Francisco / García, Beñat / Cabrejas, Jesús	Assessing building displacement with GPS	393-399
Hall, Matthew R.	Assessing the environmental performance of stabilised rammed earth walls using a climatic simulation chamber	139-145
Deng, Baoqing / Kim, Chang Nyung	CFD simulation of VOCs concentrations in a resident building with new carpet under different ventilation strategies	297-303
Yang, Te-Hsin / Lin, Cheng-Jung / Wang, Song-Yung / Tsai, Ming-Jer	Characteristics of particleboard made from recycled wood-waste chips impregnated with phenol formaldehyde resin	189-195
Jo, Jae-Hun / Lim, Jae-Han / Song, Seung-Yeong / Yeo, Myoung-Souk / Kim, Kwang-Woo	Characteristics of pressure distribution and solution to the problems caused by stack effect in high-rise residential buildings	263-277
Marinoni, Nicoletta / Pavese, Alessandro / Riva, Angelo / Cella, Fiorenza / Cerulli, Tiziano	Chromatic weathering of black limestone quarried in Varenna (Lake Como, Italy)	68-77
Oral, Emel Laptalı / Mistikoglu, Gulgun	Competitive analysis of the Turkish brick industry—a case study for developing countries	416-423
Chakrabarty, B. K.	Computer-aided design in urban development and management—A software for integrated planning and design by optimization	473-494
Vydra, Vítězslav	Degradation risk assessment of external envelopes: A practical engineering approach	344-348
Olgun, Metin / Çelik, M. Yavuz / Polat, H. Eylem	Determining of heat balance design criteria for laying hen houses under continental climate conditions	355-365
Gorgolewski, Mark	Developing a simplified method of calculating U-values in light steel framing	230-236
Abo-Qudais, Saad	The effects of damage evaluation techniques on the prediction of environmental damage in asphalt mixtures	288-296
Çolak, Semra / Colakoglu, Gursel / Aydin, Ismail	Effects of logs steaming, veneer drying and aging on the mechanical properties of laminated veneer lumber (LVL)	93-98
Çolak, Semra / Colakoglu, Gursel / Aydin, Ismail / Kalaycıoğlu, Hülya	Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives	304-309
Yildiz, Sibel / Gümüşkaya, Esat	The effects of thermal modification on crystalline structure of cellulose in soft and hardwood	62-67
Koroneos, Christopher / Kottas, George	Energy consumption modeling analysis and environmental impact assessment of model house in Thessaloniki—Greece	122-138
Asi, Ibrahim M.	Evaluating skid resistance of different asphalt concrete mixes	325-329
Acar, Cengiz / Acar, Habibe / Eroğlu, Engin	Evaluation of ornamental plant resources to urban biodiversity and cultural changing: A case study of residential landscapes in Trabzon city (Turkey)	218-229
Li, Zheng / Deng, Shiming	An experimental study on the inherent operational characteristics of a direct expansion (DX) air conditioning (A/C) unit	1-10
Norvaišienė, R. / Burlingis, A. / Stankevičius, V.	Impact of acidic precipitation to ageing of painted facades’ rendering	254-262
Saraswathy, V. / Song, Ha-Won	Improving the durability of concrete by using inhibitors	464-472
Ocal, M. Emin / Oral, Emel Laptalı / Erdis, Ercan / Vural, Gamze	Industry financial ratios—application of factor analysis in Turkish construction industry	385-392
Tam, Vivian W. Y. / Shen, L. Y. / Tam, C. M. / Pang, Willy W. S.	Investigating the intentional quality risks in public foundation projects: A Hong Kong study	330-343
Dikel, Erhan / Yener, Cengiz	A lighting coordinate database for 3D art objects	246-253
Hu, Shih-Cheng / Chen, Chao-Ching	Locating the very early smoke detector apparatus (VESDA) in vertical laminar clean rooms according to the trajectories of smoke particles	366-371
Rahal, Khaldoun	Mechanical properties of concrete with recycled coarse aggregate	407-415
Cheng, C. L. / Chen, C. L. / Chou, C. P. / Chan, C. Y.	A mini-scale modeling approach to natural daylight utilization in building design	372-384
Wu, Zhuang / Melnik, Roderick V. N. / Borup, Finn	Model-based analysis and simulation of airflow control systems of ventilation units in building environments	203-217
Zavadskas, Edmundas Kazimieras / Antuchevičienė, Jurgita	Multiple criteria evaluation of rural building's regeneration alternatives	436-451
Alnaser, N. W. / Flanagan, R.	The need of sustainable buildings construction in the Kingdom of Bahrain	495-506
Zukowski, Miroslaw	A new formula for determining a minimum recommended value of inlet air velocity from UFAD system to prevent occupants from draught risk	171-179
Gaitani, N. / Mihalakakou, G. / Santamouris, M.	On the use of bioclimatic architecture principles in order to improve thermal comfort conditions in outdoor spaces	317-324
Ozgener, Onder / Hepbasli, Arif	A parametrical study on the energetic and exergetic assessment of a solar-assisted vertical ground-source heat pump system used for heating a greenhouse	11-24
Gupta, Abhishek / David Cheong, K. W.	Physical characterization of particulate matter and ambient meteorological parameters at different indoor–outdoor locations in Singapore	237-245
Singh, T. N. / Sinha, S. / Singh, V. K.	Prediction of thermal conductivity of rock through physico-mechanical properties	146-155
van Hoof, Joost / Hensen, Jan L. M.	Quantifying the relevance of adaptive thermal comfort models in moderate thermal climate zones	156-170
Arslan, Hakan	Re-design, re-use and recycle of temporary houses	400-406
Jang, M. S. / Koh, C. D. / Moon, I. S.	Review of thermal comfort design based on PMV/PPD in cabins of Korean maritime patrol vessels	55-61
Chang, Yung-Chung	Sequencing of chillers by estimating chiller power consumption using artificial neural networks	180-188
Kim, Young-Sub / Kim, Kang-Soo	Simplified energy prediction method accounting for part-load performance of chiller	507-515
Pajumägi, A. / Veermäe, I. / Praks, J. / Poikalainen, V. / Miljan, J.	Spatial microclimate patterns in reconstructed and new large uninsulated loose housing cowsheds	113-121
Chenvidyakarn, T. / Woods, A.	Stratification and oscillations produced by pre-cooling during transient natural ventilation	99-112
Bauer, Elton / de Sousa, Jose G. G. / Guimarães, Elvio A. / Silva, Francisco Gabriel S.	Study of the laboratory Vane test on mortars	86-92
Hien, Wong Nyuk / Puay Yok, Tan / Yu, Chen	Study of thermal performance of extensive rooftop greenery systems in the tropical climate	25-54
Yu, W. J. / Cheong, K. W. D. / Tham, K. W. / Sekhar, S. C. / Kosonen, R.	Thermal effect of temperature gradient in a field environment chamber served by displacement ventilation system in the tropics	516-524
Demirboğa, Ramazan / Türkmen, İbrahim / Karakoç, Mehmet Burhan	Thermo-mechanical properties of concrete containing high-volume mineral admixtures	349-354
Torres, M. Isabel M. / Peixoto de Freitas, Vasco	Treatment of rising damp in historical buildings: wall base ventilation	424-435
Singhal, Anupam / Prakash, Satya / Tewari, V. K.	Trials on sludge of lime treated spent liquor of pickling unit for use in the cement concrete and its leaching characteristics	196-202
Lambropoulos, Sergios	The use of time and cost utility for construction contract award under European Union Legislation	452-463

About this
data sheet
IssueID
34854
Published on:
26/11/2019
Last updated on:
26/11/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Building and Environment - v. 42, n. 1 (January 2007)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Building and Environment - v. 42, n. 1 (January 2007)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.