Asian Journal of Civil Engineering - v. 24, n. 8 (June 2023)

Published:	June 2023

Articles in this Issue

Author(s)	Title	Page(s)
Sanyal, Prasenjit	AELH-, CFD-, and ANN-based wind interference zone prediction of regular tall buildings	3881-3891
Konar, Akashdeep / Bairagi, Debjyoti / Mandal, Shraban Kumar / Meena, Rahul Kumar / Sanyal, Prasenjit	Analysis and ANN-based prediction of wind effects on twisted skyscrapers	3557-3574
Frans, Richard / Arfiadi, Yoyong	Analysis of enhanced damage locating vector (edlv) on truss structure	2879-2892
Goyal, Harsh / Singh, Harman / Singh, Mayank / Sanyal, Prasenjit / Raj, Ritu / Meena, Rahul Kumar	ANN based prediction of wind induced interference effects on hexagonal plan shaped tall buildings with openings	3491-3507
Al Khazaleh, Mahmoud / Bisharah, Majdi	ANN-based prediction of cone tip resistance with Tabu-Search optimization for geotechnical engineering applications	3037-3054
Chebiyyam, Siva Kumar Prasad / Kattamuri, Mallikarjuna Rao	Application and evaluation of ANN and other classification algorithms for identification of clays based on mineralogical composition: a comparative study	3711-3725
Jasim, Nidal Adnan / Ibrahim, Abdulrahman Adnan / Hatem, Wadhah Amer	Artificial neural networks models for predicting performance measurement of oil projects	3597-3612
Al-Marsomi, Mohammed Salim Kh. / Al-Zwainy, Faiq Mohammed Sarhan	Assessing obstacles in construction-phases for regional development programs RDPs	3425-3436
Thilagashanthi, T. / Gunasekaran, K. / Satyanarayanan, K. S.	Assessment of chloride ion penetrability and compressive strength prediction in concrete with treated coconut shell aggregates using experimental and ANN approaches	3641-3652
Srimathi, K. R. / Padmarekha, A. / Anandh, K. S.	Automated construction schedule optimisation using genetic algorithm	3521-3528
Nabizadeh, Elham / Parghi, Anant	Automated corrosion detection using deep learning and computer vision	2911-2923
Thiagu, H. / Madhavi, T. Ch.	The behaviour of hybrid fibre-reinforced foam concrete wall panels under axial load	3667-3678
Desai, Ruturaj B. / Khatri, Ashish P.	Behavioural comparison between hybrid cellular steel beams and homogeneous cellular steel beams for different spans	3767-3780
Kashem, Abul / Das, Pobithra	Compressive strength prediction of high-strength concrete using hybrid machine learning approaches by incorporating SHAP analysis	3243-3263
Trivedi, Manoj Kumar / Sharma, Kamal	Construction time–cost–resources–quality trade-off optimization using NSGA-III	3543-3555
Abedi, Mohammadmahdi / Shayanfar, Javad / Al-Jabri, Khalifa	Damage assessment via machine learning approaches: a systematic review	3823-3852
Mohebian, Pooya / Motahari, Mohammad Reza / Rahami, Hossein	Damage detection in retaining wall structures through a finite element model updating approach	3613-3626
Kumar Tipu, Rupesh / Batra, Vandna	Development of a hybrid stacked machine learning model for predicting compressive strength of high-performance concrete	2985-3000
Verma, Virajan / Nallasivam, K.	Dynamic interaction analysis of a high-speed train vehicle and a thin-walled curved box-girder bridge with a sub-track system by finite element method	3437-3462
Chandra Paul, Suvash / Faruky, Samrat Ashek Ullah / Babafemi, Adewumi John / Miah, Md Jihad	Eco-friendly concrete with waste ceramic tile as coarse aggregate: mechanical strength, durability, and microstructural properties	3363-3373
Louzai, Amar / Abed, Ahmed	Effect of base shear ratios between moment-resisting frames and shear walls on the seismic behavior factor of RC dual structures	2863-2878
Gudainiyan, Jitendra / Gupta, Praveen Kumar	Effect of frequency content parameter of ground motion on the response of C-shaped base-isolated building	2973-2983
Selim, Mohamed / metwaly, Mohamed / Elshamy, Eman	Effect of unreinforced masonry infill walls with and without ECC layer on the performance of RC framed structure	3227-3241
Jain, Shilpi / Dubey, Kamlesh Kumar	Employing the Latin hypercube sampling to improve the NSGA III performance in multiple-objective optimization	3319-3330
Singh, Sourav / Patro, Sanjaya Kumar / Kumar Parhi, Suraj	Evolutionary optimization of machine learning algorithm hyperparameters for strength prediction of high-performance concrete	3121-3143
Ramasubramani, R. / Sivakamasundari, S. / Murali, Aravind	Experimental and analytical comparison of the flexural behaviour of light gauge steel composite beams placed with varied shear connector cross-sections	3165-3173
Gandage, Abhijeet S. / Ram, V. Vinayaka	Experimental investigation of the effect of fly ash and perlite on hydration temperature in self-compacting concrete	3509-3520
Al-Saffar, Dhurgham H. / Dawood, Mustafa B. / Habeeb, Ghalib M.	Experimental study of the structural behavior of non-prismatic reinforced concrete frame using different types of concrete under static and repeated load	3387-3398
Meena, Rahul Kumar / Sanyal, Prasenjit / Paswan, Abhishek Prakash / Raj, Ritu	Forecasting of average surface pressure coefficient of polygonal building models	3907-3918
Phadnis, P. P. / Desai, R. M. / Tande, S. N. / Dhumal, P. P.	Fragility analysis of masonry infill R.C. frame using incremental dynamic approach	3375-3386
Nguyen, Duy-Duan / Nguyen, Trong-Ha	GBRT-based model for predicting the axial load capacity of the CFS-SOHS columns	3679-3688
Jibril, M. M. / Malami, Salim Idris / Muhammad, U. J. / Bashir, Abba / Usman, A. G. / Salami, Babatunde A. / Rotimi, Abdulazeez / Ibrahim, A. G. / Abba, S. I.	High strength concrete compressive strength prediction using an evolutionary computational intelligence algorithm	3727-3741
Nguyen, Trong-Ha / Tran, Ngoc-Long / Phan, Van-Tien / Nguyen, Duy-Duan	Improving axial load-carrying capacity prediction of concrete columns reinforced with longitudinal FRP bars using hybrid GA-ANN model	3071-3081
Bellum, Ramamohana Reddy / Yaswanth, K. K. / Sreenivasa Reddy, M.	Influence of slag content and glass fibers on microstructure, durability and mechanical properties of geopolymer composites	2893-2909
Chauhan, Mayank / Kumar, Ranjan	Integrating the multi-objective particle swarm optimization-based time–cost trade-off model with earned value management	3293-3303
Parashar, Arun Kumar / Gupta, Nakul	An investigation of micro-silica inclusion in slag-based geopolymer concrete with regression and cluster analysis	3759-3765
Vishnupriyan, M. / Annadurai, R.	Investigation of the effect of substituting conventional fine aggregate with PCB powder on concrete strength using artificial neural network	3155-3163
Tsegay, Fikadu G. / Mwanaumo, Erastus / Mwiya, Balimu	Mathematical optimization methods for inner-city construction site layout planning: a systematic review	3781-3795
Satarkar, Priti R. / Londhe, S. N. / Dixit, P. R. / Suleiman, Mohamed F.	Modelling the behaviour of extended shear tab connection using artificial neural network	2767-2782
Sharma, Kamal / Trivedi, Manoj Kumar	Modelling the resource constrained time-cost-quality-safety risk-environmental impact trade-off using opposition-based NSGA III	3083-3098
Islam, Md. Munirul / Sen, Debasish / Chowdhury, Sharmin Reza	Numerical investigation on the effect of infill masonry on lateral behaviour of surrounding RC frame	2851-2862
Yadhav, Adinath / Kulkarni, Mrudula	Optimal design of FPSO topside module for in-place, lift and weighing conditions utilizing meta-heuristic optimization algorithms	3055-3070
Thiagu, H. / Madhavi, T. Ch.	Optimization of fibre reinforced foam concrete for the mechanical behaviour by artificial neural network	3175-3190
Al-Bazoon, Mustafa / Arora, Jasbir S.	Optimization of framed structures subjected to blast loading using equivalent static loads method	3305-3318
Fiorotti, Kamila Madeira / Silva, Gabrieli Fontes / Grobério Calenzani, Adenilcia Fernanda / Alves, Elcio Cassimiro	Optimization of steel beams with external pretension, considering the environmental and financial impact	3331-3344
Rabbani, Ahsan / Samui, Pijush / Kumari, Sunita	Optimized ANN-based approach for estimation of shear strength of soil	3627-3640
Alkhdour, Ahmad / Al Khazaleh, Mahmoud / Al mnaseer, Rakan / Bisharah, Majdi / Alkhadrawi, Sajeda / Al-Bdour, Hamza	Optimizing soil settlement/consolidation prediction in finland clays: machine learning regressions with bayesian hyperparameter selection	3209-3225
Gulghane, Akshay / Sharma, R. L. / Borkar, Prashant	Performance analysis of machine learning-based prediction models for residential building construction waste	3265-3276
Desai, Ruturaj B. / Khatri, Ashish P.	Performance of laterally unrestrained hybrid cellular steel beams	2755-2765
Kudale, Sachin S. / Gidde, Milind R.	Potentiodynamic resistance shifts in reinforcing steel placed in the concrete comprising supplementary cementitious material	2825-2835
Phan, Tan-Duy	Practical machine learning techniques for estimating the splitting-tensile strength of recycled aggregate concrete	3689-3710
Jayakeerti, M. / Nakkeeran, G. / Aravindh, M. Durai / Krishnaraj, L.	Predicting an energy use intensity and cost of residential energy-efficient buildings using various parameters: ANN analysis	3345-3361
Ahmad, Soran Abdrahman / Ahmed, Hemn Unis / Ali Ahmed, Dler / Hamah-ali, Brwa Hamah Saeed / Faraj, Rabar H. / Rafiq, Serwan Khwrshed	Predicting concrete strength with waste glass using statistical evaluations, neural networks, and linear/nonlinear models	3023-3035
Sharma, Prerna / Kumar, V. R. Prasath	Prediction and analysis of sandwich panel with rice husk and polyurethane foam using machine learning model	3009-3021
Verma, Manvendra	Prediction of compressive strength of geopolymer concrete by using ANN and GPR	2815-2823
Sharma, Ujjwal / Gupta, Nakul / Verma, Manvendra	Prediction of compressive strength of GGBFS and Flyash-based geopolymer composite by linear regression, lasso regression, and ridge regression	3399-3411
Pathak, Sudhanshu S. / Vesmawala, Gaurang R. / Mane, Sachin J.	Prediction of fracture energy of concrete notched beam using artificial neural network	2783-2796
Sharma, Ujjwal / Gupta, Nakul / Verma, Manvendra	Prediction of the compressive strength of Flyash and GGBS incorporated geopolymer concrete using artificial neural network	2837-2850
Bhatt, Anita / Bhargava, Pradeep	Pressure-impulse diagrams using coupled single degree of freedom systems subjected to blast load	3893-3905
Mustafa, Rashid / Samui, Pijush / Kumari, Sunita / Mohamad, Edy Tonnizam / Bhatawdekar, Ramesh Murlidhar	Probabilistic analysis of gravity retaining wall against bearing failure	3099-3119
Pujari, Atul B. / Sangle, Keshav K. / Mohitkar, Vinod M.	Progressive collapse analysis of seismically designed braced and unbraced steel frame structures	3277-3292
Al Khazaleh, Mahmoud / Bisharah, Majdi	Publisher Correction: ANN-based prediction of cone tip resistance with Tabu-Search optimization for geotechnical engineering applications	3919-3919
Sufyan, Md Saeb / Samui, Pijush / Mishra, Shambhu Sharan	Reliability analysis of frame structures under top-floor lateral load using artificial intelligence	3653-3665
Pham, Vu Hong Son / Tran, Hoang Duy	Research on applying machine learning models to predict the electricity generation capacity of rooftop solar energy systems on buildings	3413-3423
Vats, Ishan Shanker / Kanagaraj, Nallasivam	Response of a natural draught hyperbolic cooling tower using the finite element technique	3191-3208
Hajiaghamohamadi, Moein / Mofid, Massood	Seismic behavior evaluation of steel infill plate composite shear wall systems following FEMA P695 methodology	3529-3542
Kolli, Satya Eswara Sanyasi Rao / Bhatt, Govardhan	Seismic response control of an open-ground story RC frame building using the negative stiffness device	2797-2814
Pal, Apurba / Kundu, Tamal / Datta, Aloke Kumar	Sensor-based smart diagnosis of rail defects using an ann model	3001-3008
Outayeb, Sonia / Louadj, Samia / Louzai, Amar	Soil-class effects on the seismic response of RC moment-resisting frames considering soil-structure interaction	2739-2754
Sharma, Abhishek / Nallasivam, K.	Static analysis of a concrete gravity dam using the finite element technique	2939-2957
Deo, Bajrabahu D. N. / Datta, Aloke Kumar	A step toward the development of a user interface (UI) for material calculation and cost analysis of jacketed buildings	2925-2938
Shikur, Beharu D. / Zerayohannes, Girma / Gebre, Abrham	Structural grade development for round bamboo: A Review	3853-3880
Banerjee, Rajiv / Parashar, Arun Kumar / Gupta, Nakul / Srivastava, J. B.	Study on earthquake induced torsional irregularity and lateral displacement of RC building with shear wall	3463-3471
Pham, Vu Hong Son / Nguyen, Van Khon	A study on optimization of HVAC system in buildings using gray wolf optimizer (GWO) and artificial neural network (ANN)	3743-3757
Singh, Neha / Sharma, R. L. / Yadav, Kundan	Sustainable development by carbon emission reduction and its quantification: an overview of current methods and best practices	3797-3822
Meeruty, Ashish / Patel, M. N. / Nihalani, Seema	Synthesis of ZnS:Cu mechanoluminescence material for detection of surface stress on concrete elements	3591-3596
Sabarigirivasan, L. / Umamaheswari, N.	Temperature gradient impacts on concrete-encased steel I-girder: an ANN optimization approach	3145-3154
Roy, A. K. / Yadav, Himanshu / Dasu, Sai Charan / Kumar, Pardeep / Chanotra, Arun	Wind responses on twin box girder bridge deck using a fluid–structure interaction approach	2959-2972

About this
data sheet
IssueID
71771
Published on:
14/01/2024
Last updated on:
14/01/2024

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Asian Journal of Civil Engineering - v. 24, n. 8 (June 2023)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Asian Journal of Civil Engineering - v. 24, n. 8 (June 2023)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.