Wind-Induced Vibration and Vibration Suppression of High-Mast Light Poles with Spiral Helical Strakes

In this study, three-dimensional finite element models of high-mast light poles without and with spiral helical strakes were built using ANSYS software to investigate their vibration characteristics in a wind environment. Based on a two-way, fluid–structure interaction simulation method, the dynamic responses of the high-mast light poles under different windspeeds were analyzed. The results indicate that the high-mast light pole structure without spiral helical strakes may suffer from evident vortex-induced vibration, which is dominated by the third vibration mode in the windspeed range of 5~8 m/s, whereas the light pole with spiral helical strakes had no obvious vortex-induced vibration. The external helical strakes can amplify the along-wind response of the light pole to a certain extent, while significantly decreasing its crosswind vortex-induced response. The vibration suppression effect is better when the value of pitch P is small. Practically, if P = 7.5 D (D is the diameter of the dominant vibration mode), the vibration suppression effect is best. On the other hand, if the value of pitch P remains constant, the vibration suppression effect increases with the height H of the outer helical strakes. However, excessively high outer helical strakes may also increase the along-wind response of the structure. In general, when spiral helical strakes are used in design, the recommended values of P and H are P = 7.5 D and H = 0.20 D.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.