Wind Effects on Re-Entrant Wing Faces of Plus Plan-Shaped Building

The wind flow patterns and pressure distribution around a plus-shaped building are significantly influenced by re-entrant corner dimensions and building height. The present study aims to find the wind effects and study the pressure distribution with different flow patterns. The building has a plan area of approximately 300 square meters and a height of 50 m, maintaining equal lengths for the re-entrant corners. The research study is performed using the ANSYS CFX academic version. The study employs diverse visualizations, featuring the pressure coefficient (CPe), vertical and specific surface streamlines, and pressure contours. Wind incidence angles for the study are varied from 0° to 90° at an interval of 15°. Building dimensions are scaled down as per the ASCE wind tunnel test manual, and the length scale is kept at 1:100 for CFD investigation. This approach yields crucial insights into the circulation of wind patterns and the distribution of pressure across a wide range of wind incidence angles. The influence of streamlines in the bottom portion of the building model is relatively minimal. In contrast to the upper portion, the bottom exhibits robust vortices, particularly for the wind angles varying from 0° to 30°. Positive pressure is observed on the windward face, and the leeward face and side face exhibit negative pressure. This study furnishes valuable insights into flow patterns and pressure distribution across a wide range of wind incidence angles from 0° to 90° at an interval of 15°. These findings contribute significantly to a thorough comprehension of the wind flow patterns and pressure distribution around the plus-shaped building model.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.