Unloading Creep Characteristics of Frozen Clay Subjected to Long-Term High-Pressure K0 Consolidation before Freezing
Author(s): |
Jinbo Jia
Yansen Wang Yangguang Leng |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | Advances in Civil Engineering, 2019, v. 2019 |
Page(s): | 1-18 |
DOI: | 10.1155/2019/7192845 |
Abstract: |
Artificial ground freezing has been widely applied in the construction of vertical shafts in deep and thick alluvia. As an important factor, the in situ creep behavior of deep, frozen soil affects the mechanical properties of frozen walls and the safety and stability of shaft linings. Acquiring creep characteristics and deep soil parameters by methods that ignore the engineering and geological situations is currently inadvisable. A series of triaxial unloading tests were conducted with frozen clay subjected to long-term high-pressureK0consolidation before freezing to research the unloading creep characteristics, creep strength, and other parameters of the clay, and the results indicated the following: (1) The creep behaviors of frozen clay are affected by the consolidation time and consolidation stress. Long-term high-pressureK0consolidation reduces the creep strain and creep rate of frozen clay. (2) The decrease in the ice and the unfrozen water contents of frozen clay caused by the prolongation of consolidation time result in an increase in the long-term strength and instantaneous strength. Consolidation time has an obvious effect on long-term strength and weakens the creep property of frozen clay. Consolidation stress significantly affects the instantaneous strength. (3) The deformation resistance capability of frozen clay is enhanced by compaction; thus,E1,η1, andη2increase with prolonged consolidation, and the nonlinearity of the accelerated creep increases. |
Copyright: | © Jinbo Jia et al. |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
1.87 MB
- About this
data sheet - Reference-ID
10375390 - Published on:
19/09/2019 - Last updated on:
02/06/2021