Study on the Mechanical Performance of RC Beams under Load Reinforced by a Thin Layer of Reactive Powder Concrete on Four Sides

To repair reinforced concrete beams efficiently in a limited building space, the four-sided application of a reinforcing thin layer of reactive powder concrete (“RPCTL”) was proposed to improve the bending capacity of the members. Static flexural tests of one comparison beam and five reinforced beams were completed on a four-point centralized loading device. Changes in deflection, cracks, stresses, and damage characteristics of the specimens were measured under various levels of loading. The test results showed that the damage patterns of the reinforced specimens were dominated by the yielding of longitudinal tensile reinforcement at the bottoms of the beams and the crushing of the cementitious material in the top compression zones of the beams. The cracking load greatly increased by 1.42 to 7.12 times, and the ultimate bearing capacity increased by 0.29 to 1.41 times. The distribution characteristics and dynamic changes in the displacement, stress, and damage of the specimens were dynamically simulated by finite element software. The effects of reinforcement and initial load-holding level on the reinforcement effect were investigated. A bending capacity calculation formula for RPCTL reinforcement technology is proposed that aligns with the test results and can provide a reference for the design of RPCTL reinforcement.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.