Study on Mechanical Properties of Road Cement-Stabilized Macadam Base Material Prepared with Construction Waste Recycled Aggregate

At present, construction waste recycled aggregates only partially replace natural aggregates to prepare road-based materials. This study addressed this limitation and experimentally investigated the mechanical properties of cement-stabilized macadam base materials utilizing a construction waste recycled aggregate. The feasibility of using these raw materials to prepare cement-stabilized macadam bases was established via experimental validation. Subsequently, compaction tests were conducted to ascertain the maximum dry density and optimum moisture content in the mixture. The mechanical characteristics were further examined using unconfined compressive strength tests, analyzing and discussing the influences of varying cement dosages and curing periods on the material strength. The results indicate that the properties of the recycled aggregates satisfied specification requirements, demonstrating satisfactory mechanical properties. The unconfined compressive strength with a 7-day curing period and a 5% cement content fulfilled the technical standards for expressway-grade heavy and extremely heavy traffic, while that with a 6% cement content (with an added curing agent) met these requirements after just 1 day. Additionally, the curing agent enhanced the early strength of the recycled aggregate base material. This study has broken through the technical bottleneck of low content of recycled aggregate, achieved 100% replacement of natural aggregate, and promoted the sustainable development of the industry.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.