Stress Intensity Factor of Reinforced Concrete Beams in Bending

The stress values at the crack tip in bending reinforced concrete beams are considered. The stress state is analytically determined with an initial and propagating crack. Equations of the equilibrium of a part of the beam cut along the crack line are compiled. These equations are reduced to a system of two nonlinear algebraic equations using the plane-sections hypothesis. The equations determine the stress zone’s height and the nominal stress at the crack tip for a beam with an initial crack and the crack length. The rest of the stress state parameters are expressed regarding the zone stress height and the nominal stress or crack length. The same equation system determines the external moment starting from which the crack length increases. The analytical method for determining the stress intensity factor (SIF) with an initial and growing crack in bent reinforced concrete beams is proposed. The method is based on the assumption that the size of the stress concentration zone at the crack tip is determined by the equality of the nominal and local stresses at the end of this zone. The method determines the value of the external moment starting from which the crack length increases. The stress zone’s size is determined by the coincidence of the local stress with the nominal stress. The same problem is solved in a three-dimensional formulation by the FE method, considering the stress field’s peculiarities at the crack tip. The calculation results coincide with the analytical solutions.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.