Strength and Deformability of Fiber Reinforced Cement Paste on the Basis of Basalt Fiber
Author(s): |
Yury Barabanshchikov
Ilya Gutskalov |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | Advances in Civil Engineering, 2016, v. 2016 |
Page(s): | 1-5 |
DOI: | 10.1155/2016/6562526 |
Abstract: |
The research object of the paper is cement paste with the particulate reinforcement of basalt fiber. Regardless of fibers' length at the same fiber cement mix workability and cement consumption equality compressive solidity of the specimens is reduced with increasing fiber content. This is due to the necessity to increase the water-cement ratio to obtain a given workability. The flexural stability of the specimens with increasing fiber content increments in the same conditions. There is an optimum value of the fibers' dosage. That is why stability has a maximum when crooking. The basaltic fiber particulate reinforcement usage can abruptly increase the cement paste level limiting extensibility, which is extremely important in terms of crack resistance. |
Copyright: | © 2016 Yury Barabanshchikov et al. |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
1.42 MB
- About this
data sheet - Reference-ID
10176864 - Published on:
07/12/2018 - Last updated on:
02/06/2021