0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Static Load Test on Trapezoidal Filling Structure of Crushed Concrete Particles Reinforced with Waste Tire Slices

Author(s):
ORCID


Medium: journal article
Language(s): English
Published in: Advances in Civil Engineering, , v. 2021
Page(s): 1-12
DOI: 10.1155/2021/2207377
Abstract:

In this paper, a series of model tests about the trapezoidal filling structures filled with tire reinforced concrete particles has been conducted to study their stability and the ultimate bearing capacity. The effects of the reinforcing tire slices on the global stability and ultimate bearing capacity of the model were investigated, the results show that the tire slices reinforcement can reduce the total settlement of the trapezoidal filling structure, and the ultimate bearing capacity of the reinforced trapezoidal filling structure with tire slices is obviously improved. Among them, the settlements of crushed concrete particles reinforced with bottom layer, top layer, and two layers (both bottom layer and top layer) waste tire slices are 11.5%, 37.7%, and 46.2% less than that of unreinforcement, respectively. Compared with unreinforcement, when the top layer of the model is reinforced with tire slices, the Earth pressure values at the top layer and the bottom layer are reduced by 21.1% and 22.7%, respectively; the Earth pressure values at the top layer and the bottom layer are reduced 6.3% and 14.3%, respectively, when the bottom layer of the model is reinforced with tire slices, and the Earth pressure values at the top layer and the bottom layer are reduced 23.4% and 32.9%, respectively, when the two layers of the model are reinforced with tire slices. The sliding surface of the pure concrete particles filled trapezoidal structure is continuous and runs through the whole trapezoidal filling structure slope; the sliding zone of reinforced trapezoidal filling structure with tire slices decreases with the laying of tire slices.

Copyright: © Fang Tong et al.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10638276
  • Published on:
    30/11/2021
  • Last updated on:
    17/02/2022
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine