0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

A small piezoelectric stack motor designed for vacuum and micro-dust environment

Author(s): ORCID
ORCID


Medium: journal article
Language(s): English
Published in: Smart Materials and Structures, , n. 1, v. 32
Page(s): 015009
DOI: 10.1088/1361-665x/aca733
Abstract:

With the development of moon exploration, higher requirements have been proposed for the adaptability of small motors under vacuum and micro-dust conditions. In this paper, a rotational motor based on piezoelectric stacks is proposed, which can be driven by a single-phase direct current with a simple drive circuit. The motor dimensions are 24 mm × 24 mm × 24 mm (length × width × height), and the mass is 11.4 g. In air environment, the maximum output rotational speed of the motor is 1372 rpm, and the maximum stall torque is 3.2 mN m at 40 V DC and 5.93 kHz. An open-loop control system is established to drive the stepping motion of the motor, and the minimum stepping angle is measured as 0.122 mrad. An environmental experiment of the motor is conducted in a lunar simulator module, which can simulate a high vacuum (6.7 × 10−5 Pa) and micro-dust (average 75 μm) environment of the lunar surface. The result shows that the motor can work steadily in the vacuum and micro-dust environment with an average speed of 1723 rpm, which demonstrates its potential applications in the space environment.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.1088/1361-665x/aca733.
  • About this
    data sheet
  • Reference-ID
    10695317
  • Published on:
    10/12/2022
  • Last updated on:
    10/12/2022
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine