Shaking Table Tests and Validation of Multi-Modal Sensing and Damage Detection Using Smartphones

Structural health monitoring (SHM) systems using modal- and vibration-based methods, particularly wireless systems, have been widely investigated in relation to the monitoring of damage states in civil infrastructures such as bridges and buildings. Unlike many current efforts in developing wireless sensors, one can instead leverage the suite of sensors, network transmission, data storage, and embedded processing capabilities built into modern smartphones for SHM. The objective of this work was to assess and validate the use of smartphones for the monitoring of artificial damage states in a three-story steel frame model subjected to shaking table-induced earthquake excitations. The steel frame was a 2D structure with six rotary viscous dampers installed at the beam–column joints, which were used for simulating different damage states at their respective locations; the columns were also replaced with ones of reduced cross-sectional areas to further emulate damage. In addition to instrumenting the frame with conventional tethered sensors, Apple iPhones (pre-loaded with customized smartphone apps to record acceleration and inter-story displacement) were also installed. Shaking table tests were then conducted on the undamaged and damaged frames, while conventional sensors’ and smartphones’ responses were collected and compared. Wavelet packet decomposition was employed to analyze the acceleration data to detect damage in two different cases. Structural displacements were also computed from acceleration measurements and compared with displacement measurements to further validate the quality of smartphone sensor measurements.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.