Seismic Performance Analysis of Corrugated Steel Plate Shear Wall Connected with Beams Only

This paper studied the seismic performance of corrugated steel plate shear walls with vertical corrugated steel plates connected with beams only (CboSPSWs). A numerical model of a CboSPSW was developed. Then, a series of parametric analyses were conducted to determine the effects of the related parameters on the hysteretic performance of CboSPSWs, including the height–thickness ratio, aspect ratio, corrugation angle, stiffness of the free-edge stiffener, and surrounding frame stiffness. In addition, the limit of the stiffness of the free-edge stiffener of the CboSPSW was investigated. Finally, the serviceability of the existing design method, the Plate-Frame Interaction model (PFI), for CboSPSWs was examined. The results show that CboSPSWs have high values of strength and initial stiffness as well as good and stable energy dissipation capacities. The ultimate strength of the corrugated steel plate (CSP) can be improved significantly by free-edge stiffeners. When the flexural stiffness ratio exceeds 1.0, the increase of the average stress of the CSPs close to the beams is less than 20%, and the tension field develops fully in the CSPs in CboSPSWs. The PFI model can predict the shear strength and initial stiffness values of the hysteretic curves of CboSPSWs with good accuracy, which can be used in the design and plastic analyses of CboSPSWs.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.