Seismic Analysis of Soft Storey Building in Earthquake Zones

In this paper (G+8) building is modeled like a bare frame, a bare frame with the shear wall, and a bare frame with X bracing by changing the soft storey to different floors. The static analysis effect is determined for all three models with zone IV and zone V using Staad pro-V8i software. The main objective of the research was to assess the impact of a soft storey in various earthquake zones and by varying places of the soft storey from first to the top floor and for frames with different column shapes by seismic analyses in staad pro. The results of variable building models are obtained from the research regarding various parameters such as displacement, storey drift, and base shear. More significantly, comparing different structural systems revealed a reduction in lateral displacement and story drift. The shear wall reduced the Storey Displacement by 98.838% and storey drift by 99.86%. The Steel bracing reduced the Storey Displacement by 97.846 % and storey drift by 92.6%. Finally, it has been found that the Shear wall reduces lateral displacement and storey drift, thus significantly contributing to greater structural stiffness. The analysis results recommended that the shear wall use reinforced concrete frames for the seismic hazard zones and the Steel bracing recommended for the low seismic zones.

This creative work has been published under the Creative Commons Attribution 3.0 Unported (CC-BY 3.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.