Research on the Properties of Nano-Al2O3- and Nano-SiO2-Modified Bio-Asphalt and Mixtures
Author(s): |
Wei Qiao
Feilong Yuan Xiaojian Xu Qingzhou Wang |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | Buildings, 22 October 2024, n. 11, v. 14 |
Page(s): | 3366 |
DOI: | 10.3390/buildings14113366 |
Abstract: |
Bio-oil as a substitute or modifier for petroleum asphalt has significant environmental, economic, and sustainable development implications. However, the insufficient high-temperature and anti-aging characteristics of bio-asphalt lead to the limited application of bio-oil in road engineering. In this study, the characteristics of bio-asphalt were reinforced by nano-Al2O3 and nano-SiO2. The nanomaterial-modified bio-asphalt was evaluated using basic characteristics, viscosity, and high- and low-temperature rheological characteristic tests. Meanwhile, the road behavior of nanomaterial-modified bio-asphalt mixtures was assessed. The test results demonstrated that incorporating bio-oil improved the low-temperature performance of PA. Compared with PA, BA’s ductility was increased by 83.87%. Nano-Al2O3 and nano-SiO2 positively affected the bio-asphalt’s temperature sensitivity and high-temperature and anti-aging characteristics but inhibited the low-temperature characteristics. Combining the results of the high- and low-temperature characteristics of nanomaterial-modified bio-asphalt, a nano-Al2O3 dosage between 4 and 6% or a nano-SiO2 dosage between 6 and 8% can realize the enhancement of high-temperature and anti-aging characteristics of bio-asphalt, and the low-temperature characteristics are better than those of petroleum asphalt. Meanwhile, the dynamic stability, crack resistance, and water loss resistance of the nanomaterial-modified bio-asphalt mixtures meet the specification requirements. The adjustable and designable high- and low-temperature characteristics of bio-asphalt can be realized by adjusting the dosage of nanomaterials. The application of bio-oil and nanomaterials promotes the resourceful utilization of waste and provides new possibilities for road engineering materials. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
3.15 MB
- About this
data sheet - Reference-ID
10804749 - Published on:
10/11/2024 - Last updated on:
10/11/2024