Research on a Vibration Model of a Superstructure under the Vibration Load of Metro Trains

In view of the problem that vibration of superstructures under vibration loads of metro trains causes, this research used a metro depot and superstructure project as its background and proposed a numerical simulation method based on the impedance analytical model and finite element model to simulate and predict the vibration and secondary noise response of subway trains affecting multi-story buildings at different locations on the ground and in the superstructure. The method’s accuracy was verified using real measurement data. The research shows that vibrations generated by subway operations vertically at lower floors remain relatively unchanged, then slowly attenuate before increasing near the top floors. Mitigation measures should primarily address four aspects: rails, fasteners, sleepers, and roadbed. The adverse effects of vibration can be controlled by reducing the excitation intensity of the vibration source, attenuating vibrations along the propagation path, and isolating vibrations in the foundation and interior of the building. This research method can quickly and accurately predict the vibration and noise conditions of superstructure properties and provide support for vibration and noise reduction in practical engineering.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.