Research on a Calculation Method for the Horizontal Displacement of the Retaining Structure of Deep Foundation Pits

The precise calculation and effective control of the horizontal displacement of deep foundation pit retaining structures are critical for foundation pit support design and construction. Based on stress‒strain linear elastomer theory and considering the deformation coordination between an enclosure wall and its internal support member, a formula for the redundant restraint force acting on the retaining wall was derived through the unit load method and the principle of elastic superposition. Moreover, a method for calculating the horizontal displacement of the retaining structure of a deep foundation pit was formulated, which is convenient for engineering applications. The method can also be used to calculate the horizontal displacement of cantilevered and anchored retaining structures when the loading conditions of the deep foundation pit and the relevant parameters of the enclosure structure are known. A case study was conducted on a standard section with an excavation width H of 19.3 m and an excavation depth h of 17.8 m. The structural parameters of the enclosure wall, along with the elastic support stiffness coefficient and soil layer parameters of the pit, were inputted into a MATLAB calculation code. Then, four internal support constraint forces Fi and the calculated values for the horizontal displacement of the enclosure wall were obtained after running the code. The calculated curve closely matched the curve of values measured in the field. The horizontal displacements of the top of the wall of several cement–soil gravity enclosure structures mentioned in the literature were also calculated. The results of these calculations were then compared with the measured data and corresponding data from the literature. The examples provided clear evidence demonstrating that the proposed method is highly reliable for calculating the horizontal displacement of deep foundation pit enclosure structures.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.