0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Preparation of the composite asphalt material and its performance in road rehabilitation

Author(s):

Medium: journal article
Language(s): English
Published in: Stavební obzor - Civil Engineering Journal, , n. 2, v. 32
Page(s): 271-281
DOI: 10.14311/cej.2023.02.0021
Abstract:

Asphalt materials have a very wide range of applications in roads, but with the increase of traffic pressure and the intensification of cracking and rutting in traditional asphalt pavements, there is an urgent need to further improve the performance of asphalt materials. In this paper, composite asphalt materials containing 10%, 20%, and 30% trinidad lake asphalt (TLA) and 0%, 2%, 3%, and 4% styrene-butadiene rubber (SBR) were prepared. Their basic properties and the properties of the mixes used for road rehabilitation were analyzed. It was found that the addition of TLA and SBR caused a decrease in the penetration degree of the material, but significantly increased the softening point of the material, TLA was detrimental to the ductility of the material, and SBR could improve the ductility. From the analysis of the performance of road rehabilitation mixes, the comprehensive performance of 20% TLA+3% SBR was good, its dynamic stability reached 3,712.66 times/mm, its water stability was also good, and its stiffness modulus was 3,332.64 MPa. The results prove the improvement of TLA and SBR for asphalt performance, and this method can be applied in practical projects.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.14311/cej.2023.02.0021.
  • About this
    data sheet
  • Reference-ID
    10739817
  • Published on:
    02/09/2023
  • Last updated on:
    02/09/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine