Prediction of Joint Shear Deformation Index of RC Beam–Column Joints

In the analysis of reinforced concrete (RC) buildings, beam–column joints are regarded as rigid nodes. In fact, joint deformation may make a significant difference in the lateral response of RC buildings if joints are not properly designed and detailed. To consider joint flexibility, several types of joint models have been proposed. However, these models require complicated computations, consequently making them challenging to apply in engineering practice. This paper proposed a simple approach for predicting the contribution of the joint deformation to the total deformation of RC interior beam–column joints under critical structural deformations. To develop such a simple and accurate approach, experimental and analytical studies were performed on RC interior beam–column joints. In this study, eight half-scale joint specimens were tested under reversed cyclic loading, and 39 full–scale FE models were constructed, varying the selected key parameters. The experimental and analytical results showed that the “joint shear” is a useful index for the beam–column joints with high shear stress levels of but is unsuitable for defining the failure of beam–column joints with medium or low shear stress levels of and . Based on the results, three equations were developed to predict the joint shear deformation index (SDI) of RC interior beam–column connections corresponding to three different types of failure (i.e., joint failure before beam yielding, joint failure after beam yielding, and beam flexural failure). SDI predictions of the proposed equations correlate well with 50 test results of beam–column joints available from the literature.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.