Phase-Change/Salt-Based Slow-Release Composite Material for Anti-Icing and Snow-Melting

Currently, self-desiccating asphalt mixtures on roads mainly incorporate phase-change materials or salt-based slow-release agents individually for de-icing. However, pure phase-change material mixtures have limited anti-freezing efficiency and short heat-release duration, making them impractical for large-scale snow melting; meanwhile, salt-based slow-release agents suffer from rapid deterioration in de-icing performance. To address these issues encountered, herein, we introduce the phase-change/salt-based slow-release composite materials via the integration of these two materials and investigate their pavement and de-icing performance with the asphalt mixture. For the pavement performance, the optimal asphalt–aggregate ratio for the anti-icing asphalt mixture was found to be 5.1% For anti-bonding and de-icing performance, the electrical conductivity tests, bonding pull-off tests, and interfacial contact melting experiments were conducted. The results indicate that the latent heat of the TH-ME5 (phase-change material) can delay the decrease in environmental temperature and inhibit salt release from T-SEN (salt-based slow-release material), thereby extending the lifespan of the anti-icing asphalt mixture. These results demonstrate that the synergistic effect between the two components of the composite material not only enhance the snow-melting and de-icing performance of the asphalt pavement but also prolong the snow-melting time of the pavement in a low-temperature environment.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.