Performance Evaluation of Multiple Aging-Regeneration of SBS-Modified Bitumen Regenerated by a Composite Rejuvenator

In this study, compound regeneration of SBS-modified bitumen (SMB) was carried out by a composite rejuvenator composed of furfural extraction oil (FEO) and 1,6-hexanediol diglycidyl ether (HDDGE) in the presence of catalyst triethanolamine (TEOA). SMB was subjected to three aging-regeneration cycles, and the physical and rheological properties, toughness and tenacity, and chemical structures of the SMB after each aging-regeneration cycle were tested to investigate the regeneration effect of the composite rejuvenator on SMB at different numbers of cycles. The ductility decreases and low-temperature properties deteriorate as the number of cycles increased, but the high-temperature properties of the SMB are improved. The complex modulus aging index and phase angle aging index indicate that the viscous behavior of SMB weakens after the second and third aging. The degree of viscoelasticity and toughness recovery decreases with the increase in the number of cycles, and the tenacity of SMB after the third aging-regeneration cycle is basically lost. The results of the Fourier transform infrared (FTIR) spectra tests prove that with the increase in the aging–regeneration cycles of SMB, the intensity of FTIR peaks of oxygen-containing functional groups is greater, and the recovery of aged SMB is gradually weakened.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.