Overall and Local Wind Loads on Post-Installed Elevator Shaft of Existing Buildings

The glass curtain walls of post-installed elevator shafts in existing buildings can be damaged by local wind loads, and the serviceability of an elevator may be affected by excessive overall wind loads, especially in hurricane-prone areas. The overall and local wind load characteristics of elevator shafts with different arrangements (E-type, H-type, I-type) were studied using wind tunnel tests and computational fluid dynamics (CFD) numerical simulations. Firstly, high-frequency base balance wind tunnel tests of these elevator shafts with three arrangements were carried out to obtain the overall wind loads on the elevator shafts. Secondly, a CFD simulation was performed on the post-installed elevator shafts with three arrangements, obtaining the surface local wind pressure distribution of the elevator shafts under different wind directions. Finally, the wind-induced displacement responses of post-installed elevator shafts were analyzed. The results show that the aerodynamic interference of different elevator arrangements (E-type, H-type, I-type) and wind directions have significant effects on the overall local wind loads and wind-induced responses of the post-installed elevator, while the local wind loads on the area of the elevator door are less influenced by the elevator arrangement type than local wind loads on the surface and the overall wind loads of the elevator shafts. The results and conclusions may be helpful for developing the wind-resistant design of a post-installed elevator shaft.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.