Optimization Design of Cotton-Straw-Fiber-Modified Asphalt Mixture Performance Based on Response Surface Methodology

This research explored the application of cotton straw fiber in asphalt mixtures, aiming to optimize the asphalt mixtures’ performance. Firstly, 17 experiments were designed using Response Surface Methodology (RSM). Subsequently, the Box–Behnken Design (BBD) was used to examine how the asphalt content, fiber length, and cotton straw fiber content interacted to affect the modified asphalt mixes’ pavement performance. Based on the experimental findings, performance prediction models were created to direct optimization. The optimized design was then validated through pavement performance tests and bending fatigue tests. The findings revealed that cotton straw fiber content, length, and asphalt content significantly influence the performance of modified asphalt mixtures. The inclusion of cotton straw fibers enhanced various properties of the mixtures. When the fiber content was set at 0.3%, fiber length at 6 mm, and asphalt content at 5.3%, the response indicators, including Marshall stability, dynamic stability, flexural strength, and freeze–thaw strength ratio, were measured at 12.246 kN, 2452.396 times/mm, 12.30 MPa, and 92.76%, respectively. These results indicate that the cotton-straw-fiber-modified asphalt mixture achieved optimal performance while meeting regulatory requirements. Additionally, fatigue tests showed that the cotton-straw-fiber-modified asphalt mixture exhibited superior fatigue resistance compared with the SBS-modified asphalt mixture. The maximum error between the RSM predictions and the experimental measurements was within 10%, demonstrating the accuracy of the predictive models in estimating the impact of different factors on asphalt mixture performance. The application of RSM in designing and optimizing cotton-straw-fiber-modified asphalt mixtures proved to be highly effective, offering valuable insights for utilizing cotton straw fibers in road construction.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.