Numerical Simulations of Restrained Shrinkage Cracking in Glass Fibre Reinforced Shotcrete Slabs

Modern tunnels in hard rock are usually constructed by drill and blast with the rock reinforced by shotcrete (sprayed concrete) in combination with rock bolts. The irregular rock surface and the projection method of shotcrete lead to a tunnel lining of varying thickness with unevenly distributed stresses that affect the risk of cracking during shrinkage of the young and hardening material. Depending on water conditions, shotcrete is sprayed directly either onto the rock surface or over a drainage system, creating a fully restrained or an end-restrained structural system. In this paper, a method for nonlinear numerical simulations has been demonstrated, for the study of differences in stress build-up and cracking behaviour of restrained shotcrete slabs subjected to shrinkage. Special focus was given to the effects of the irregular shape and varying thickness of the shotcrete. The effects of glass fibre reinforcement and bond were implemented in the study by changing the fracture energy in bending and in the interaction between shotcrete and the substrate. The study verifies that an end-restrained shotcrete slab is prone to shrinkage induced cracking and shows the importance of a continuous bond to avoid wide shrinkage cracks when shotcrete is sprayed directly onto the rock.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.