0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Numerical Investigation on the Dynamic Response of Fault-Crossing Tunnels under Strike-Slip Fault Creep-Slip and Subsequent Seismic Shaking

Author(s): ORCID





Medium: journal article
Language(s): English
Published in: Buildings, , n. 5, v. 13
Page(s): 1163
DOI: 10.3390/buildings13051163
Abstract:

Tunnels built in geologically active areas are prone to severe damage due to fault dislocation and subsequent earthquakes. Using the Ngong tunnel in the East African Rift Valley as an example, the dynamic response of a fault-crossing tunnel and the corresponding sensitivity are numerically simulated by considering four factors, i.e., tunnel joint stiffness, isolation layer elastic modulus, strike-slip fault creep-slip and earthquakes. The results show that a valley-shaped propagation of peak displacement at the tunnel invert occurs in the longitudinal axis direction under an earthquake alone. Then, it transforms into an S-shaped under strike-slip fault creep-slip and subsequent seismic shaking. The tunnel invert in the fault zone is susceptible to tensile and shear failures under strike-slip fault creep-slip movements of less than 15 cm and subsequent seismic shaking. Furthermore, the peak tensile and shear stress responses of the tunnel invert in the fault zone are more sensitive to fault creep-slip than earthquakes. They are also more sensitive to the isolation layer elastic modulus compared to the joint stiffness of a segmental tunnel with two segments. The stress responses can be effectively reduced when the isolation layer elastic modulus logarithmic ratio equals −4. Therefore, the isolation layer is more suitable to mitigate the potential failure under small strike-slip fault creep-slip and subsequent seismic shaking than segmental tunnels with two segments. The results of this study can provide some reference for the disaster mitigation of fault-crossing tunnels in terms of dynamic damage in active fault zones.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10728492
  • Published on:
    30/05/2023
  • Last updated on:
    01/06/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine