Numerical Analysis of the Influence of Deep Excavation on Nearby Pile Foundation Building

In this paper, a numerical simulation is used to establish a three-dimensional model, which considers the height of buildings, the relative position between buildings, and foundation pits. These were studied in detail to investigate the changes in settlement of adjacent buildings and the displacement and internal force of piles caused by deep foundation pit excavation. The results indicate that the number of floors in the building, along with the angle and distance between the building and the excavation pit, have a significant impact on the settlement of the building and the deformation and internal force variation in the piles. For example, when D = 0.1 H, with the increase in the number of floors, the increase in the bending moment of pile 1 at the pile shaft is 62.63 kN·m, and the increase in the bending moment at the pile head is 224.72 kN·m. At this point, the maximum horizontal displacement of the pile shaft occurs at approximately 1.27 H. When θ = 45∘, the maximum difference between the maximum and minimum deformations of the building is 9.71 mm. When D ≤ 1.0 H, the majority of the building is in the primary influence range of surface settlement behind the wall, and the building undergoes a combined deformation of ‘upper convex’ and ‘concave’. When D > 1.0 H, the building predominantly resides in the secondary influence range, and the building undergoes a deformation of ‘upper convex’.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.