Numerical Analysis of Fracture Behaviour on Marble Samples Containing Two Flaws

Uniaxial compression tests were conducted on marble specimens containing two flaws. There are coplanar flaws and noncoplanar flaws. The inclination angle and spacing of flaws were considered of the coplanar flaws model, and the step angle and spacing of flaws were considered of the noncoplanar flaws model. Strength failure and crack coalescence behaviour were analysed in the paper. The crack evolution process containing microcrack initiation, coalescence, and failure is focused on the rock bridge coalescence and the extent of the pre-existing flaws. There are four forms of rock bridge coalescence: tensile crack coalescence, shear crack coalescence, mixed tensile and shear crack coalescence, and no coalescence. Also, there are four forms of the rock failure mode: tensile failure, shear failure, mixed tensile and shear failure, and split fracture. The outer end of the critical stress values were used to compare with the crack initiation strengths, and the crack initiation strengths were slightly larger than the critical stress. In addition, energy dissipation laws were analysed during the model fracturing process. The crack evolution mechanisms around the pre-existing flaw in the model were revealed by the distribution of microcrack and energy dissipation.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.