Mitigating the Bridge End Bump Problem: A Case Study of a New Slab System with a Lower Partition Slab-Pile Foundation

This paper describes a case of using a pile-slab composite foundation to handle a bridge-end bump problem. Conventionally, a deep-seated concrete slab method is employed to tackle this problem; however, this method generates a large stress concentration within 1 m from the bridge end. The mechanical bearing capacity of the deep-seated concrete slab is insufficient and prone to structural damage. Further, the longitudinal slope change rate is also very high. To overcome these limitations and solve the problem, a lower partition slab-pile foundation treatment method is proposed. The construction of the proposed method is provided, and the results of a case study analyzed by field monitoring and a simulation executed using ABAQUS finite element simulation show good agreement. The results indicate that the mechanical bearing characteristics for the proposed lower partition slab-pile foundation treatment method are better than the conventional deep-seated concrete slab method, and therefore, the structure is more resistant to damage. In addition, because the pile foundation enhances the foundation bearing capacity, the longitudinal slope change rate of the new pile-slab composite foundation is 2.5 times that for the deep-seated concrete slab technology. Thus, the lower partition slab-pile foundation treatment method can better deal with the bridge end bump problem.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.