Long-Term Monitoring of RC Beams under Different Partial Alkali–Silica Reactions: Experimental Results and Restraint Mechanisms

The alkali–silica reaction significantly impacts the durability of reinforced concrete structures. This paper aims to investigate the structural expansion properties of reinforced concrete beams under different partial alkali–silica reactions. Alkali–silica reaction tests were conducted on four reinforced concrete beams, focusing on immersion depth and NaOH solution position as key parameters. Subsequently, the spatial and temporal distribution characteristics of the beam expansion rate were analyzed. Results indicate notable variations in the expansion’s initiation, rate, and final magnitude at different measurement points on the concrete beam, depending on the soaking positions and depths used. The expansion rate was higher in areas directly immersed in the NaOH solution, decreasing near the reinforcement regions. However, strain distribution, along with beam height, satisfied plane-section assumption in the reinforced beam section. Finally, a regional expansion index was established to quantitatively assess the non-uniform damage by alkali aggregates in beams, and the uniaxial restraint mechanism in reinforced concrete structures was also described.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.