0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Load capacity of penstock manifolds subjected to increasing settlements at the vertical supports

Author(s):
(Graz University of Technology, Institute of Steel Structures Graz AUSTRIA)
(Graz University of Technology, Institute of Steel Structures Graz AUSTRIA)
Medium: journal article
Language(s): English
Published in: ce/papers, , n. 3-4, v. 6
Page(s): 1767-1772
DOI: 10.1002/cepa.2565
Abstract:

Hydroelectric power plants usually have penstock manifolds near the powerhouse, including individual bifurcations to provide several turbines. These steel constructions have numerous vertical supports and are designed based on linear elastic behaviour, leading to very small allowable settlements at the supports.

For a representative built manifold, with five bifurcations (six branch pipes), the elasticā€plastic load capacity was studied in detail, assuming dead load, internal pressure and increasing settlements at the supports. Different settlement patterns were studied. The development of plastic zones was analyzed, depending on the rate of settlement. Due to the high bending stiffness of the penstock manifold, the penstock detaches from the single supports due to the settlement, leading to a significant redistribution of the vertical reaction forces at the supports.

The comprehensive calculations show adequate robustness of the penstock manifolds, even though in case of very high settlements at the supports. Due to the significant redistribution of the reaction forces at the supports, these vertical supports must have an increased bearing capacity, in comparison to the reaction forces due to dead load and internal pressure based on linear elastic analyses.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.1002/cepa.2565.
  • About this
    data sheet
  • Reference-ID
    10766925
  • Published on:
    17/04/2024
  • Last updated on:
    17/04/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine