Komparativna analiza učinkovitosti otpada od orezivanja palmi i geotekstila na stabilizaciju posteljice (Comparative effectiveness research of palm tree pruning waste and geotextiles on subgrade stabilization)
Medium: | journal article |
---|---|
Language(s): | Croatian |
Published in: | Građevinar, November 2022, n. 10, v. 74 |
Page(s): | 829-838 |
DOI: | 10.14256/jce.3401.2021 |
Abstract: |
This paper proposes a novel and environmentally friendly solution for subgrade stabilization that not only contributes towards waste material recycling but also enhances the bearing capacity of subgrade soil. Laboratory plate load tests were conducted under static loads to evaluate the potential use of palm tree pruning waste (PTPW) as a soil reinforcement material instead of commercially manufactured geotextiles, as well as to analyse the impact of the reinforcement depth, number of reinforcement layers, and the relative density of the subgrade material. The results revealed that as the number of reinforcements increased, the load-bearing pressure behaviour of the reinforced subgrades improved. Furthermore, when the reinforcement depth decreased, the load-bearing pressure behaviour improved significantly. All PTPW-reinforced subgrades performed better than geotextile-reinforced subgrades under the same conditions. Additionally, the bearing capacity improvement in the reinforced subgrades was evaluated based on the bearing capacity improvement factor (BCIF). The highest BCIF was obtained when the PTPW was used as a reinforcement with two layers at a sand subgrade relative density of 80 %. |
Copyright: | © 2022 Necla Ceylan Bora, Cafer Kayadelen, Gökhan Altay, Yakup Önal, Mitat Öztürk |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
2.77 MB
- About this
data sheet - Reference-ID
10695819 - Published on:
10/12/2022 - Last updated on:
10/05/2023