Investigation on Forced Convective Heat Transfer at the Building Façade with Louver Blinds under Different Wind Directions

Exterior louver blinds are one of the most common shading devices attached to the building façade, which will not only screen solar radiation but also affect the flow around the building and change the convective heat exchange at the façade. To better understand how different wind directions affect the convective heat properties of louvered building façades, this paper conducted a CFD simulation with the validation of previous wind-tunnel experiments. A total of 63 shading cases and 7 unshaded cases were both investigated by simulations. It was found that with the increase in wind attack angle θ, the surface-averaged convective heat transfer coefficient (CHTC) at the louvered surface will first increase by about 40~50% (θ from 0° to 60°) and then be cut down by 60% (θ from 60° to 90°). In addition, the convective heat exchange rate at the louver slats will gradually decrease with the growth of θ. Finally, modifications for previous correlations were proposed to quantify the effect of wind directions on the CHTCavg at the blinds and façade, of which the maximum deviation for convective heat exchange rate is less than 18%.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.