Investigation of the Scruton Number Effects of Wind-Induced Unsteady Galloping Responses of Bridge Suspenders

When the critical wind speed of vortex-induced resonance is close to that of quasi-steady galloping, a type of coupled wind-induced vibration that is different from divergent galloping can easily occur in a rectangular bar. It is a type of “unsteady galloping” phenomenon wherein the response amplitude increases linearly with the increase in the wind speed, while a limit cycle oscillation is observed at each wind speed, whose mechanism is still in research. Mass and damping are the key parameters that affect the coupling degree and amplitude response estimation. For a set of rectangular section member models with a width-to-height ratio of 1.2, by adjusting the equivalent stiffness, equivalent mass, and damping ratio of the model system and performing comparative tests on the wind-induced vibration response of the same mass with different damping ratios, it is possible to achieve the same damping ratio with different masses and the same Scruton number with different masses and damping combinations under the same Reynolds number. The results show that the influence of the mass and damping parameters on the “unsteady galloping” amplitude response is independent, and the weight is the same in the coupling state. The Scruton number “locked interval” (12.4–30.6) can be found in the “unsteady galloping” amplitude response, and the linear slope of the dimensionless wind speed amplitude response curve does not change with the Scruton number in the “locked interval.” In addition, a “transition interval” (26.8–30.6) coexists with the “locked interval” wherein the coupling state of the wind-induced vibration is converted into the uncoupled state. The empirical formula for estimating the “unsteady galloping” response amplitude is modified and can be used to predict the amplitude within the design wind speed range of similar engineering members.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.