Influence of the Hot-Mix Asphalt Production Temperature on the Effectiveness of the Reclaimed Asphalt Rejuvenation Process

Hot recycling of reclaimed asphalt pavement (RAP) into new hot-mix asphalt (HMA) is a complex process that must be precisely calibrated in the asphalt plants. In particular, temperature is a key parameter that, if inadequately set, can affect the final mix performance as it influences the RAP binder mobilization rate and the severity of bitumen short_term aging. The present paper aims at evaluating the effect of HMA production temperature on the behavior of mixtures including 50% of RAP and two types of rejuvenating agents. In particular, volumetric, mechanical, chemical, and rheological properties of the mixes and binder-aggregate adhesion have been investigated on the HMA produced in the laboratory at 140 °C or 170 °C. The results showed that the adoption of a lower production temperature did not significantly influence the air voids content in the mix, but determined a less stiff, brittle and cracking-prone behavior. Moreover, the decrease of the HMA production temperature was profitable for the increase of bitumen-aggregate adhesion.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.