Influence of Pile Spacing on the Compressive Bearing Performance of CEP Groups

Pile spacing is an important factor affecting the bearing capacity of concrete expansion pile (CEP) groups. In this study, a pile group was simulated and analyzed using ANSYS software R19.0. The influence of pile spacing on the bearing capacity of the pile group under a vertical load was determined using three sets of four-, six-, and nine-pile models with different pile spacings. The grid division of the pile soil model adopts a mapping method, using the contact types of rigid and flexible bodies and applying surface loads to the model piles step-by-step. After vertical pressure was applied to the model pile, in-depth analysis was conducted on the displacement cloud map, pile top displacement, and other data. The different stress conditions of corner, edge, and center piles in each model group were compared and analyzed, revealing the relationship between the stress mechanism and failure law of the soil around the pile and the pile spacing. It was found that the soil displacement range of edge piles is slightly larger than that of corner piles. This phenomenon gradually decreases with increasing pile spacing. When the pile spacing increases to four times the cantilever diameter, the difference in soil displacement at different pile positions is small, and the pile spacing has little effect on the compressive bearing capacity of the pile group. Thus, it is reasonable to control the pile spacing at three to four times the cantilever diameter. In the nine-pile model, when the load is loaded to the 20-step level, the displacement value of the central pile is −72.278 mm, while the displacement values of the edge pile and corner pile are −69.012 mm and −66.806 mm. It is shown that increasing the pile spacing can effectively reduce the pile group effect and improve the bearing capacity of the pile foundation. At present, CEP pile groups are gradually being applied in practical engineering, but research on the influence of pile spacing on the compressive bearing performance of CEP pile groups is still at a very early stage. This article reinforces the influence of pile spacing on the compressive bearing performance of CEP pile groups. It provides theoretical support for its application in practical engineering.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.