^ Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties | Structurae
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures


Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties


Medium: journal article
Language(s): English
Published in: Civil Engineering Dimension / Dimensi Teknik Sipil, , n. 2, v. 20
Page(s): 51
DOI: 10.9744/ced.20.2.51-56

This study evaluates the effect of particle size distribution (PSD) of high calcium fly ash on high volume fly ash (HVFA) mortar characteristics. Four PSD variations of high calcium fly ash used were: unclassified fly ash and fly ash passing sieve No. 200, No. 325 and No. 400, respectively. The fly ash replacement ratio of the cementitious material ranged between 50-70%. The results show that with smaller fly ash particles size and higher levels of fly ash replacement, the workability of the mixture was increased with longer setting time. There was an increase in mortar compressive strength with finer fly ash particle size, compared to those with unclassified ones, with the highest strength was found at those with fly ash passing mesh No. 325. The increase was found due to better compactability of the mixture. Higher fly ash replacement reduced the mortar's compressive strength, however, the rate was reduced when finer fly ash particles was used.

Copyright: © All right reserved 2018. Civil Engineering Dimension

This creative work has been published under the Creative Commons Attribution 3.0 Unported (CC-BY 3.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
  • Published on:
  • Last updated on: