0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Influence of Mineral Admixtures on the Performance of Pervious Concrete and Microscopic Research

Author(s):




Medium: journal article
Language(s): English
Published in: Buildings, , n. 2, v. 14
Page(s): 533
DOI: 10.3390/buildings14020533
Abstract:

Pervious concrete is an innovative eco-friendly construction material. Through the application of mineral admixtures and microscopic analysis to optimize its performance and analyze its mechanisms, its traits as a sustainable building option may be further improved. This study primarily examines the impact of the optimal blend quantities of fly ash, silica fume, and reinforcing agent on the attributes, micro-morphology, and phase composition of porous concrete. The optimal admixture was chosen after analyzing the effects of various factors on the mix ratio and properties of permeable concrete. To understand the degree of impact, performance tests were conducted on the 28-day compressive strength, water permeability coefficient, and porosity. Furthermore, the micro-mechanisms of the admixtures and reinforcing agents on the properties of permeable concrete were analyzed from a microscopic point of view using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. This research found that the advantageous properties of permeable concrete were enhanced by the simultaneous integration of appropriate quantities of fly ash, silica fume, and reinforcing agent. This resulted in a 28-day compressive strength of 18.33 MPa and a permeability coefficient of 8.27 mm/s. Compared with the unadulterated mineral admixture, the optimal admixture of fly ash, silica fume, and reinforcing agent at the same time increased the 28-day compressive strength by about double; the permeability coefficient was reduced by 36%, but it was still at a high level; and the measured porosity did not differ much from the designed porosity. Through thorough microanalysis, the hydration reaction was significantly improved, which could enhance the microstructure and pore structure of the concrete. This was supported by a substantial increase in the macroscopic compressive strength and a decrease in the water permeability coefficient, which were consistent with the aforementioned enhancement found in the microanalysis.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10773314
  • Published on:
    29/04/2024
  • Last updated on:
    05/06/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine