0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Influence of Fiber Orientation on the Shear Properties of Steel Fiber-Reinforced Reactive Powder Concrete Beams

Author(s):
ORCID

Medium: journal article
Language(s): English
Published in: Advances in Civil Engineering, , v. 2023
Page(s): 1-14
DOI: 10.1155/2023/9953966
Abstract:

Steel fiber-reinforced reactive powder concrete (SFRPC) has good mechanical properties and is thus useful for engineering applications. Generally, the fibers in SFRPC are randomly distributed. To study the effects of the amount, length, and orientation of steel fibers on the shear strength of SFRPC beams, nonreinforced aligned steel fiber-reinforced reactive powder concrete (ASFRPC) beams were prepared using a large-scale electromagnetic field orientation device. Shear tests of specimens with a shear span ratio of 1.5 were performed under two fiber contents (1.0% and 2.0%) and three fiber lengths (20, 30, and 40 mm). The full-field strain during the loading process was obtained via the digital image correlation method, and the effects of fiber quantity and orientation on the shear strength of the beams were analyzed. The ASFRPC beams exhibited higher ductility but lower shear capacity than the SFRPC beams under the same conditions. The shear capacity increased with the quantity of steel fibers. According to the test results, the calculation formulas of the shear-bearing capacities of ASFRPC and SFRPC beams were established.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.1155/2023/9953966.
  • About this
    data sheet
  • Reference-ID
    10740500
  • Published on:
    12/09/2023
  • Last updated on:
    12/09/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine